PURGE SOLUTIONS CYCLOPS Z Manuale utente

CYCLOPS

Z – Purge Indicator

Low cost

Simple to install & use

Highly reliable & maintenance

free

Enclosure vent is part of casing

Local & remote status

indicator

Casing available in anodized

aluminum & 316 stainless

steel

12 or 24 VDC & 115 or 230 VAC

All in One Unit

OVERVIEW:

To prevent the possibility of fire or explosion inside the enclosures of energized

electrical equipment, a protective gas supply is used to dilute potentially flammable

vapors to an acceptable level, creating a safe area for the devices within the enclosure.

Positive pressure prevents the ingress of flammable vapors in the surrounding

atmosphere from entering into the enclosure as long as positive pressure is

maintained. After the enclosure is purged, power may be manually applied to the

protected electrical equipment.

The Purge Solutions CYCLOPS Z – Purge Indicator provides objective evidence of

positive enclosure pressure with both a visible indicator and supplied standard, a dry-

contact output for remote status monitoring. The enclosure purge vent is an integrated

part of the CYCLOPS Z – Purge Indicator’s casing, which mounts directly to the

enclosure being purged. No additional holes, sheet metal, or plumbing is required.

CYCLOPS

Z – Purge Indicator

FEATURES:

The CYCLOPS Z – Purge Indicator mounts directly to purged enclosure. No additional sheet metal

enclosures or plumbing is required. (Refer to Figures 1, 2, 3, & 4)

Enclosure purge vent is an integrated part of the CYCLOPS Z – Purge Indicator casing. No

additional holes or plumbing is required in purged enclosure. (Refer to Figure 4)

Dry contact output for remote monitoring is supplied as standard. Contact open on alarm

(Standard). Contact closed on alarm (Optional). Order optional contact closed on alarm by adding

an “X” at end of Purge Solutions model number. (Refer to Figure 4)

Rugged, visual green LED indicator. Green LED on; enclosure purge pressure at or above required

pressure. Green LED off, enclosure purge pressure below required pressure.

The CYCLOPS Z – Purge Indicator is certified to ATEX, CEC, IECEx, NEC, NFPA, UL and CE

Marked for installation and use in Division 2 and Zone 2 hazardous areas.

Figure 2

Figure 1

Figure 3 Figure 4

CYCLOPS

Z – Purge Indicator

OPTIONS & ACCESSORIES AVAILABLE:

Purge Indicator Casing: Anodized aluminum (standard) 316 stainless steel (optional).

Input Voltages Available: Either 12 VDC, 24 VDC, 115 VAC, or 230 VAC.

Purge Solutions Available Models:

1. Type Z – Purge Indicator: 12 VDC, Anodized aluminum, Gas hazardous area installations: Purge

Solutions model number PSCZ-1A

2. Type Z – Purge Indicator: 12 VDC, 316 stainless steel, Gas hazardous area installations: Purge

Solutions model number PSCZ-1S

3. Type Z – Purge Indicator: 24 VDC, Anodized aluminum, Gas hazardous area installations: Purge

Solutions model number PSCZ-2A

4. Type Z – Purge Indicator: 24 VDC, 316 stainless steel, Gas hazardous area installations: Purge

Solutions model number PSCZ-2S

5. Type Z – Purge Indicator: 115 VAC, Anodized aluminum, Gas hazardous area installations:

Purge Solutions model number PSCZ-3A

6. Type Z – Purge Indicator: 115 VAC, 316 stainless steel, Gas hazardous area installations: Purge

Solutions model number PSCZ-3S

7. Type Z – Purge Indicator: 230 VAC, Anodized aluminum, Gas hazardous area installations:

Purge Solutions model number PSCZ-4A

8. Type Z – Purge Indicator: 230 VAC, 316 stainless steel, Gas hazardous area installations: Purge

Solutions model number PSCZ-4S

9. Type Z – Purge Indicator: 12 VDC, Anodized aluminum, Dust hazardous area installations:

Purge Solutions model number PSCZ-1AD

10.Type Z – Purge Indicator: 12 VDC, 316 stainless steel, Dust hazardous area installations: Purge

Solutions model number PSCZ-1SD

11.Type Z – Purge Indicator: 24 VDC, Anodized aluminum, Dust hazardous area installations:

Purge Solutions model number PSCZ-2D

12.Type Z – Purge Indicator: 24 VDC, 316 stainless steel, Dust hazardous area installations: Purge

Solutions model number PSCZ-2SD

13.Type Z – Purge Indicator: 115 VAC, Anodized aluminum, Dust hazardous area installations:

Purge Solutions model number PSCZ-3AD

14.Type Z – Purge Indicator: 115 VAC, 316 stainless steel, Dust hazardous area installations:

Purge Solutions model number PSCZ-3SD

15.Type Z – Purge Indicator: 230 VAC, Anodized aluminum, Dust hazardous area installations:

Purge Solutions model number PSCZ-4AD

16.Type Z – Purge Indicator: 230 VAC, 316 stainless steel, Dust hazardous area installations:

Purge Solutions model number PSCZ-4SD

Vortex Cabinet Cooler Kit: For applications where thermal management of electrical cabinets

and control panels are required; Purge Solutions offers Vortex Cabinet Cooler assemblies, which

provide cooling capacities for your application and maintain a NEMA 4 and 4X (IP66) rating for

installation and use in hazardous area. Contact your local Purge Solutions representative or the

factory for sizing of system and installation information.

CYCLOPS

Z – Purge Indicator

OPTIONS & ACCESSORIES AVAILABLE CONTINUED:

Continuous Dilution Purge Gas Inlet Kit: For interfacing and regulating pressure of protective gas

supply to enclosure. Small Continuous Dilution Purge Gas Inlet Kit for enclosures with a volume up

to 15 cubic feet (425 liters). Model number PSO-SCD-A is our small aluminum version and PSO-

SCD-S is our small stainless version. Small Continuous Dilution Purge Gas Inlet Kit supply gas inlet

to regulator is 1/4-18 FNPT. Medium Continuous Dilution Purge Gas Inlet Kit for enclosures with a

volume up to 75 cubic feet (2,125 liters). Model number PSO-MCD-A is our medium aluminum

version and PSO-MCD-S is our medium stainless version. Medium Continuous Dilution Purge Gas

Inlet Kit supply gas inlet to regulator is 3/8-18 FNPT. Large Continuous Dilution Purge Gas Inlet Kit

for enclosures with volumes up to 200 cubic feet (5,663 liters). Model number PSO-LCD-A is our

large aluminum version and PSO-LCD-S is our large stainless version. Large Continuous Dilution

Purge Gas Inlet Kit supply gas inlet to regulator is 1/2-14 FNPT. All kits include input fitting,

regulator, gauge, bracket and mounting hardware.

Manual Leakage Compensation Purge Gas Inlet Kit: Having two outlets from manifold able to

increase the amount of purge gas to enclosure during dilution may be manually selected to speed

up dilution of potentially flammable materials to an acceptable level, reducing dilution time and

permitting a more rapid restoration of power to purge protected equipment. Small Manual Leakage

Compensation Purge Gas Inlet Kits are for enclosures with a volume up to 15 cubic feet (425 liters).

Model number PSO-SLC-A is our small aluminum version and model number PSO-SLC-S is our

small stainless steel version. Small Manual Leakage Compensation Purge Gas Inlet Kit supply gas

inlet to regulator is 1/4-18 FNPT. Medium Manual Leakage Compensation Purge Gas Inlet Kits are

for enclosures with a volume up to 75 cubic feet (2,125 liters). Model number PSO-MLC-A is our

medium aluminum version and model number PSO-MLC-S is our medium stainless steel version.

Medium Manual Leakage Compensation Purge Gas Inlet Kit supply gas inlet to regulator is 3/8-18

FNPT. Large Manual Leakage Compensation Purge Gas Inlet Kit is for enclosures with volumes up

to 200 cubic feet (5,663 liters). Model number PSO-LLC-A is our large aluminum version and PSO-

LLC-S is our large stainless steel version. Large Manual Leakage Compensation Purge Gas Inlet

Kit supply gas inlet to regulator is 1/2-14 FNPT. All kits include input fittings, regulator, gauge and

manifold block.

Back-Up Purge Gas Kit: In the even that the initial protective gas supply is lost, a back-up source

of protective gas may be automatically applied to the protected enclosure. Purge Solutions model

number is PSO-BUPG-K

Back-Up Vent Kit: To protect the enclosure from over pressure; Purge Solutions offers two sizes of

back-up vents. The first size is our Small Back–Up Vent for enclosures with a volume up to 15

cubic feet (425 liters). Model number PSO-SBUV-S is our small side mount version and model

number PSO-SBUV-T is our small top mount version. The second size we offer is our Medium

Back-Up Vent for enclosures with volumes up to 75 cubic feet (2.125 liters). Model number PSO-

MBUV-S is our medium side mount version and model number PSO-MBUV-T is our medium top

mount version. The third size we offer is our Large Back-Up Vent for enclosures with volumes up to

200 cubic feet (5,663 liters). Model number PSO-LBUV-S is our large side mount version and

model number PSO-LBUV-T is our large top mount version. All Back-Up Vents are constructed of

316 stainless steel and come with all mounting hardware.

CYCLOPS

Z – Purge Indicator

OPTIONS & ACCESSORIES AVAILABLE CONTINUED:

Protective Gas Loss Indicator Kit: An explosion-proof differential pressure switch may be

installed to provide an alarm contact output signal to indicate the loss of the backup source of

protective gas. Another explosion-proof differential pressure switch may be installed on the main

protective gas supply to indicate that the primary protective gas pressure is adequate. Purge

Solutions model number is PSO-PGLI-K.

Differential Pressure Gauge Kit: Purge Solutions also offers an all stainless steel differential

pressure gauge kit, which can be mounted on left side model number PSO-DPG-L, right side model

number PSO-DPG-R, top model number PSO-DPG-T or bottom model number PSO-DPG-B of

enclosure.

GENERAL SPECIFICATIONS:

Casing Dimensions:

4.5” diameter x 1.9” tall (114.3mm diameter x 48.3mm tall).

Operating Temperature Range:

- 40ºF to 150ºF (- 40ºC to 65ºC).

Purge Pressure Lower Limit:

0.20 inches H20 (0.50 mbar).

Casing:

Anodized aluminum, 2.48 lbs. (1.13 kg), IP66, NEMA 4, (standard).

316 stainless steel, 6.70 lbs. (3.04 kg), IP66, NEMA 4X, (optional).

Power Input / Consumption:

0.5 Watts max.

Voltage:

12 VDC model (11 VDC to 16 VDC), 47 to 63 Hz.

24 VDC model (19 VDC to 28 VDC), 47 to 63 Hz.

115 VAC model (85 VAC to 160 VAC), 47 to 63 Hz.

230 VAC model (130 VAC to 265 VAC), 47 to 63 Hz.

Dry Contact Rating:

Contact open on alarm (Standard).

Contact closed on alarm (Optional).

265 Volts AC / DC, 150mA max.

Standard Hardware:

All stainless steel mounting fasteners, o-ring, 1/4" (6.4mm) diameter vent restrictor, warning label,

and CD with all required documentation.

CYCLOPS

Z – Purge Indicator

GENERAL SPECIFICATIONS CONTINUED:

Hazardous Area Approvals:

ATEX and IECEx

II 3 G Ex nA nL [pz] IIC T6 “for Zone 2 gas hazardous areas”

II 3 D Ex tD A22 IP66 T79°C “for Zone 2 dust hazardous areas”

ANSI / ISA 12.4, NEC / NFPA 496, CEC and UL

Class I, Division 2, Group A,B,C&D, T6 “for gas hazardous areas”

Class II, Division 2, Group E,F&G, T6 “for dust hazardous areas”

Certified to an Ambient Temperature Range of - 40ºF (- 40ºC) <Tamb< + 149ºF (+ 65ºC)

CE Marked

Purge Solutions : 12450 Galveston Rd, Suite C, Webster, TX. 77598, USA : Telephone 832-368-7166

Web Site = http://www.purgesolutions.com : Email = [email protected] : Document # DO-11010-R

Altri manuali per CYCLOPS Z

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali PURGE SOLUTIONS Strumento di misura

PURGE SOLUTIONS

PURGE SOLUTIONS CYCLOPS Z Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente