Radio Shack 15-310 Manuale utente

15-310

User’s Guide

Big Button

Universal Remote Control

Thank you for purchasing your Big Button Universal

Remote Control from RadioShack. Please read this

user’s guide before installing, setting up, and using your

new remote control. 1/3

Package Contents

Features

• Operatesuptothreedevices

• Largeeasy-to-seebuttons

1Install the Batteries

1. Removethebatterycover.

2. InserttwoAAAbatteries(notincluded)bymatching

thepolaritysymbols(+/–)markedinside.

3. Replacethebatterycover.

AAA

User’s

Guide

Code List

Remote

control

MUTE

Turnoffthesound

•Displaythemenufor

theselecteddevice

•Inmenus,activate

anddeactivatesthe

alternativefunction

ofthemulti-function

keys.

SET

Activatesetupforthe

remote

CH +/–

Selectthenextor

previouschannel

0-9

Directlyenterchannels

–

Accesssubchannels

onaTVorreceiver

Red LED

ASPECT

Changeviewing

options(4:3or16:9)

Turnonoroffaselected

device

Device Keys

Selectadevicetocontrol

VOL +/–

Adjustthevolume

ENTER

Presstoenterthechannel

number

Multi-function keys

•ControlyourVCRorDVD

player

•Inmenus,thekeysstand

forleft(),up(),right

(),OK(),down()

andexit()

•Keysreturntotheir

originalfunctionifnokeys

arepressfor10sec.

2Setup

YouruniversalremotecanoperateaTV,VCR,DVD,cable

orsatellite.

Setupyouruniversalremoteinoneofthreeways:

• Brand Code Setup: Directlyenterthedevicecode

fromtheCodeList.Tryeachcodeuntilyoundone

thatworksforyourdevice.

• Auto Code Search: Youruniversalremote

automaticallygoesthroughallthedevicecodes.

(Thismethodcantakeupto45minutestosearchall

thecodesforthe3devices.)

• Manual Code Search: Manuallygoesthrougheach

codeforyourdeviceonebyoneatthetouchofthe

G button.

n Note:

Keep your remote pointed at the device that

you want to program throughout setup.

Brand Code Setup

1. Poweronthedevicethatyouwanttocontrol.

2. Findthecode(orcodes)foryourdeviceinthe

includedCode List.Ifyourdevice’sbrandisnot

listed,usethe Auto Code Search orManual Code Search

method.

3. Onyouruniversalremote,pressandholdSET,and

thenpressadevicekey(TV,VCR/DVDorSTB/CBL).

TheredLEDlightsandstayslit,indicatingthatthe

remoteisinsetupmode.Releasebothbuttons.

n Note: Do not hold down the keys for longer

than three seconds or the remote enters auto search

mode.

4. Entertherst3-digitcodeforyourdeviceandbrand.

Pausebrieybetweeneachdigittomakesurethe

remotereceivesallinputs.TheredLEDashes

wheninputisreceived,thenturnsoffifyouentered

therightcode.IftheredLEDstayslit,enterthe

nextcodeforyourdeviceandbrand.Repeatforall

possiblecodesuntiltheredLEDturnsoff.

5. Verifythesetupbytestingtheremotecontrol’s

buttonsandfunctions.Ifsomeofyourdevice’s

functionsdonotrespondtotheremote,repeatsteps

3-5withanothercode.

nNotes:

• Ifyouwanttoquitduringdevicesetup,pressthe

device key or wait 10 seconds for the remote to exit

setup automatically.

• Ifyouareuncertainaboutyour3-digitcodeentry,

follow “Check Current Brand Code” on page 9 to conﬁrm

your code.

• Ifyou’vetriedallthecodesforyourdeviceinthe

Code List and your universal remote still does not

work, follow steps for Auto Code Search or Manual Code

Search.

Auto Code Search

AutoCodeSearchautomaticallysendsdevicecodesto

thedevicethatyouwanttocontrol.

1.

Poweronthedevicethatyouwanttocontrol.For

VCRsandDVDplayers,youmustinsertatapeordisc.

2.

Onyouruniversalremote,pressandholdSET,then

pressandholdadevicekey(TV,VCR/DVDorSTB/

CBL).Continuetoholddownbothkeysformorethan

threeseconds.TheredLEDashesandtheuniversal

remotestartssearching.Releasebothbuttons.

3. Whenthedevicerespondsinanyway(switches

off,play,pause,volumechange,channelchanges),

pressanykeyotherthanSETwithintwosecondsto

conrmthecode.TheredLEDwillstopashing.

4. Verifythesetupbytestingvariouskeysand

functions.PressGonyouruniversalremotetoturn

onthedeviceifitturnedoffinstep3.Ifsomeofyour

device’sfunctionsdonotrespondtotheremote,

repeatsteps2-4.

nNotes:

• BecauseAutoCodeSearchrequiresyoutostopthe

search, you must remain with the device during the

process.

• Tostopsearching,pressanykey(exceptSET). The

red LED light turns off and the search stops.

• Duringasearch,youcanpressSET to change search

direction from forward to backward or vice versa.

Manual Code Search

ManualCodeSearchsendscodestothedeviceyouwant

tocontrolonebyoneatthetouchoftheGbutton.

1. Poweronthedevicethatyouwanttocontrol.For

VCRsandDVDplayers,youmustinsertatapeor

disc.

2. Ontheuniversalremote,pressandholdSET,then

pressadevicekey(TV,VCR/DVDorSTB/CBL).The

redLEDlightsupandstayslit,indicatingtheremote

isinsettingmode.Releasebothbuttons.

n Note: Do not hold down the keys for longer

than three seconds or the remote enters auto search

mode.

3. PressGontheuniversalremote.Theuniversal

remoteentersmanualcodesearchmodeandthe

redLEDashes.

4. PressGrepeatedlyonyouruniversalremoteuntil

thedeviceturnsoff.(EachpressoftheGkeysends

adifferentcodetoyourdevice.)

Whenthedeviceturnsoff,thecodeiscorrect.Press

thedevicekeyonyouruniversalremotewithin10

secondstoconrmthecode.

5. PressG onyouruniversalremotetoturnyourdevice

backon.

6. Verifythesetupbytestingvariouskeysandfunctions.

Ifsomeofyourdevice’sfunctionsdonotrespondto

theremote,repeatsteps2-6.

nNotes:

• Duringasearch,youcanpressSET to change search

direction from forward to backward or vice versa.

• Ifnokeysarepressedin10seconds,searchstops.

Operation

Check Current Brand Code

Forfuturereferenceandtosavetimeifyoueverneed

tosetupyourremoteagain,retrieveandwritedown

yourdevicecodesforeachdevicekeyonyouruniversal

remote.



Completethefollowingstepstocheckthecodenumber

foraspecicdevice.TheredLEDonyouruniversal

remotewillashtoindicatethecodes.

1. Pressthedevicekeyonyouruniversalremote.

2. Tochecktherstdigit,pressandholdSET,then

pressnumericalkey1.TheredLEDwillash

repeatedlytoindicatetherstdigit.(oncefor1,

twicefor2,etc.IftheredLEDdoesnotash,this

indicatesthattherstdigitis“0.”)

3. Tochecktheseconddigit,pressandholdSET,then

press 2.TheredLEDwillashrepeatedlytoindicate

theseconddigit.

4. Tocheckthethirddigit,pressandholdSET,then

press3.TheredLEDwillashrepeatedlytoindicate

thethirddigit.

Lock Device

Lockthedevicecodeinyourremotesoitdoesn’tget

changedordeletedunintentionally.

To lock in the code for your current device:

1. Pressthedevicekeythatyouwanttolockonyour

universalremote.

2. HolddownSET,thenpress7.TheredLEDblinks

twice.Thecodeforthecurrentdeviceisnowlocked

andcannotbeoverwritten.

3. Tounlockthecurrentdevicekey,pressandholdSET,

thenpress8.TheredLEDblinkstwice.

nNote:

• Thelockeddevicescannotbechangeduntilyou

unlock the current device key or reset your remote.

• Tounlockacodeotherthanthecurrentone,pressthat

devicekeybeforefollowingstep3.

Indice

Altri manuali Radio Shack Telecomando

Radio Shack

Radio Shack TOUCHSCREEN REMOTE Manuale utente

Radio Shack

Radio Shack Univer 15-2138 Manuale utente

Radio Shack

Radio Shack 15-309 Manuale utente

Radio Shack

Radio Shack 2-in-1 Remote Control Manuale utente

Radio Shack

Radio Shack Keychain-Remote Control System Manuale utente

Radio Shack

Radio Shack 6-IN-ONE TOUCHSCREEN REMOTE Manuale utente

Radio Shack

Radio Shack Wireless Security Keychain Remote Manuale utente

Radio Shack

Radio Shack Light and Learn Remote Manuale utente

Radio Shack

Radio Shack 15-2147 - Universal Remote Manuale utente

Radio Shack

Radio Shack Kameleon Manuale utente

Radio Shack

Radio Shack Audio/ Video Remote Control Manuale utente

Radio Shack

Radio Shack 7-in-One Home Theater Manuale utente

Radio Shack

Radio Shack Kameleon 4-in-1 Manuale utente

Radio Shack

Radio Shack 15-2146 - Voice Prompt Universal Remote Manuale utente

Radio Shack

Radio Shack Kameleon 4-in-1 Manuale utente

Radio Shack

Radio Shack 7-in-1 Remote Control with Lighted Keypad Manuale utente

Radio Shack

Radio Shack 4 Manuale utente

Radio Shack

Radio Shack 8-IN-ONE REMOTE Manuale utente

Radio Shack

Radio Shack 15-303 Manuale utente

Radio Shack

Radio Shack 150-2114 Manuale utente

Radio Shack

Radio Shack 15-1925 Manuale utente

Radio Shack

Radio Shack Keychain Manuale utente

Radio Shack

Radio Shack 6-in-1 Remote Control Manuale utente

Radio Shack

Radio Shack Remote Control Manuale utente

Manuali Telecomando popolari di altre marche

Panasonic

Panasonic EUR7622KB0 Manuale utente

Bang & Olufsen

Bang & Olufsen Beo4 Manuale utente

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuale utente

Multiplex

Multiplex PROFI TX 9 Manuale utente

One Remote

One Remote RMB4 Manuale utente

FUTABA

FUTABA 9ZAP - PART2 Manuale utente

HR Matic

HR Matic HR MULTI 3 Manuale utente

Yamaha

Yamaha ACC-GNRST-30-20 Manuale utente

EisSound

EisSound KBSOUND Manuale utente

Marantz

Marantz RC101 Manuale utente

Conrad

Conrad FS20 TC6 Manuale utente

Anritsu

Anritsu MP1777A Manuale utente

Niles

Niles WVC100 Guida alla risoluzione dei problemi

RCA

RCA RCU1300 Manuale utente

Bang & Olufsen

Bang & Olufsen BEO6 Manuale utente

GE 94901 Manuale utente

Onbon

Onbon YQ1-75 Manuale utente

FUTABA

FUTABA R7108SB Istruzioni per l'installazione