Reci FSC 1000 Manuale utente

User Guide for

Single-Mode Continuous-Wave Fiber Laser

FSC 1000, FSC 1500

Beijing Reci Laser Technology Co., Ltd.

2020.04

  Beijing Reci Laser Technology Co., Ltd 
User Guide for FSC1000, FSC1500 
I 
 
CONTENT 
Chapter 1 Safety Information .........................................................................................................1
1 Safety Conventions used in the User Guide ....................................................................1
2 Laser Classification........................................................................................................2
3 Labels on the Product.....................................................................................................2
4 Safety Instructions for Optical Operation........................................................................3
5 Safety Instructions for Electrical Operation ....................................................................4
6 Other Safety Instructions................................................................................................5
Chapter 2 Product Description........................................................................................................7
1 Property Introductions....................................................................................................7
2 Model description ..........................................................................................................7
3 Unpacking and inspection ..............................................................................................8
4 Operation Conditions .....................................................................................................8
5 Instructions for use....................................................................................................... 11 
6 Characteristic Parameters ............................................................................................. 11 
Chapter 3 Installation of the laser ................................................................................................. 13 
1 Dimension of the machine............................................................................................13 
2 The optical output head ................................................................................................14 
3 Connection and Requirements of the Cooling system ...................................................15 
4 Installation precautions.................................................................................................18 
Chapter 4 Using of the product.....................................................................................................20 
1 Front Panel...................................................................................................................20 
2 Back Panel Description ................................................................................................21 
3 Electric Power Connect................................................................................................ 22 
4 Interface Definition ......................................................................................................23 
5 Laser Control ...............................................................................................................26 
6 Local AD Mode............................................................................................................27 
7 Remote AD Model .......................................................................................................28 
Chapter 5 Use of monitoring software ..........................................................................................29 
1 Connect........................................................................................................................29 

  Beijing Reci Laser Technology Co., Ltd 
User Guide for FSC1000, FSC1500 
II 
 
5.2 Monitor Page ...............................................................................................................31 
5.3 Setting Page .................................................................................................................33 
5.4 Decrypt Page................................................................................................................34 
5.5 Fault Query Page.......................................................................................................... 35 
Chapter 6 Common faults treatment ............................................................................................. 37 
6.1 Fault alarm and query...................................................................................................37 
6.2 Common faults solution ...............................................................................................37 
Chapter 7 Warranty and Return ....................................................................................................39 
7.1 General warranty..........................................................................................................39 
7.2 Limit of warranty .........................................................................................................39 
7.3 Transportation ..............................................................................................................40 

Beijing Reci Laser Technology Co., Ltd

User Guide for FSC1000, FSC1500

Chapter 1 Safety Information

Thank you for choosing the FSC series fiber laser from Reci laser.

In order to guarantee the fiber laser is operated safely (including personnel

safety, equipment safety, production safety), ensure the product remain its best

condition for a long time. We compile this document with important safety, operating,

maintaining and other information. Please take time to read and understand this

User's Guide and familiarize yourself with the operating and maintenance instructions

before using the product.

1.1 Safety Conventions used in the User Guide

SYMBOLS

DESCRIPTION

WARNING :

Refers to a potential hazard that may leads to a personal injury

or death.

CAUTION :

Refers to a potential hazard on product, or a potential physical

injury on personnel.

SYMBOL

IMPORTANT :

Refers to any information regarding the operation of the

product. Please do not overlook this information.

Beijing Reci Laser Technology Co., Ltd

User Guide for FSC1000, FSC1500

1.2 Laser Classification

This series of lasers emit invisible laser radiation around a wavelength of 1080

nm. The average power of the products is ranged from 10% to 100% at a maximum

power about 1000W or 1500W, which classifies the series of lasers Class 4 laser

instrument. Direct or indirect exposure of this level of light intensity may cause very

serious damage to the eyes or skin. In view of this, appropriate and approved laser

safety protective glasses must be worn all the time while the laser is operating.

WARNING :

The laser safety protective glasses are selected according to the

wavelengths of the output laser. The users must ensure that the laser

safety protective glasses covered the entire range of wavelengths of

the laser emission.

1.3 Labels on the Product

All safety warning symbols posted on the FSC1000 is shown below in

Figure1.1:

1: Top view of FSC1000 (same as FSC1500)

2: Rear view of FSC1000 (same as FSC1500)

Figure 1.1 Positions of the symbols on the series of lasers

Beijing Reci Laser Technology Co., Ltd

User Guide for FSC1000, FSC1500

Table 1.1 the details of the symbols

1: Class 2M Laser Product Label for Guide

Laser

2: Class 4 Laser Product(take 1000W as

example)

3: Laser Radiation Hazard Label

4: Electrical Hazard

5: Identification Plate of the device

1.4 Safety Instructions for Optical Operation

We strongly recommend that you read the following procedures before

operating the fiber laser:

(1) Never look directly into the optical output when the Electrical switch is

on.

(2) Make sure that a pair of appropriate and approved laser safety protective

glasses is worn all the time while the laser is operating.

(3) No eyes are on the path of the laser beam (direct or reflected light, scatter

light from high reflective material, etc.), at the same time, the direction of

laser output must be Shelter by reliable objects.

Beijing Reci Laser Technology Co., Ltd

User Guide for FSC1000, FSC1500

WARNING :

Even though the protective glasses are worn, staring into the

optical output is forbidden absolutely while the electrical switch of the

laser is on.

(4) Make sure that the black cap of the QBH is taken off when you are

prepared to use the laser.

(5) Make sure the end surface of the quartz head and the protective window

lens of the optical output is clean, if not, please clean it with dust-free lens

paper soaked by high purity (≥99.8%) anhydrous ethanol under a

microscope.

(6) Make sure that the processing devices can support a maximum laser power

above 1500W. If you find that the processing equipment is being heated to

a higher temperature, please stop processing immediately. An appropriate

and approved processing system is needed.

CAUTION :

A damage of the end surface of the QBH or Processing lens may

lead more serious hazard on product.

1.5 Safety Instructions for Electrical Operation

We strongly recommend that you read the following procedures before

operating the fiber laser:

(1) Make sure the power source connected to the equipment is properly

grounded with PE wire. At the same time the shell of this equipment must

Beijing Reci Laser Technology Co., Ltd

User Guide for FSC1000, FSC1500

be properly grounded. Any interruption of the ground loop may result in

personal injury.

WARNING :

The input voltage of the fiber laser is three-phase AC current

(380V AC), which may cause risk of electric shock. All the relevant

cables and connection wires have potential hazards.

(2) Make sure that the input AC voltage and capacity meet the requirements of

the very series of lasers.

(3) If the air switch shut down frequently, please contact Reci as soon as

possible to ensure the safety use of the equipment.

CAUTION :

(1) Any incorrect wiring method or AC voltage may cause

damage to people or instrument.

(2) The equipment does not have any part which can be

maintained by operators, and all the maintenance operations

must be finished by the professionals of Reci Co., Ltd.

1.6 Other Safety Instructions

(1) There are often numerous secondary laser beams produced at various

angles in the output port of the laser. These divergent beams are produced

when the primary beam of laser reflects off a smooth surface, and they are

called specular reflections. Although these secondary beams may be less

powerful than the total power emitted from the primary beam, the intensity

Beijing Reci Laser Technology Co., Ltd

User Guide for FSC1000, FSC1500

may be great enough to cause damage to the eyes and skin as well as

surface of materials.

WARNING :

You must exercise caution to avoid/minimize specular reflections

as these laser radiations are invisible!

(2) Optical accessories relevant to the laser, such as light-sensitive elements

that may be damaged from exposure to the laser light, video cameras,

photomultipliers and photodiodes, need related protections.

CAUTION :

The Reci FSC laser is strong enough to cut or weld metal, burn

skin, clothing and paint. In addition, this laser can ignite volatile

substances such as alcohol, gasoline, ether and other solvents.

During the operating process, the flammable materials around the

laser must be isolated.

(3) Please do not operate laser in darkened environments.

(4) Do not turn on the laser without an optical coupling fiber or the optical

output connector.

(5) Carry out commissioning, calibration and focusing at low output power and

then increase the output power gradually when the calibrating and focusing

work is done.

(6) If the equipment is operated in a manner not specified in this document, the

protection devices and performance of the equipment may be impaired and

the warranty will be voided.

Beijing Reci Laser Technology Co., Ltd

User Guide for FSC1000, FSC1500

Chapter 2 Product Description

2.1 Property Introductions

As high power fiber lasers developed for industrial application, FSC Series fiber

lasers are compact and efficient. The lasers are mainly applied to the fields of

welding, cutting, brazing, etc.

Main Features:

➢High wall-plug efficiency

➢High power with Excellent beam quality

➢High reliability, long service life, maintenance free

➢All fiber structure, compact, rugged package

➢Multiple anti-high-reflection

Applications:

➢Industrial applications: Material cutting（major in metal processing）, metal

welding, metal cladding.

➢Scientific research, Military application.

2.2 Model description

As a series of lasers, its model name description is illustrated as the following

figure 2.1, take FSC1000 as an example. Similarly, the FSC1500 means its maximum

average power can reach 1500W:

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali reci Strumento di misura

reci

reci R20 Manuale utente

reci

reci FC1000 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente

reci FSC 1000 Manuale utente

Manuali Strumento di misura popolari di altre marche