Renishaw OMP40 Manuale utente

Installation and user’s guide

H-2000-5022-05-A

OMP40

This document may not be copied or reproduced

in whole or in part, or transferred to any other

media or language, by any means, without the

prior written permission of Renishaw.

The publication of material within this document

does not imply freedom from the patent rights of

Renishaw plc.

Disclaimer

Considerable effort has been made to ensure

that the contents of this document are free

from inaccuracies and omissions. However,

Renishaw makes no warranties with respect to

the contents of this document and speciﬁcally

disclaims any implied warranties. Renishaw

reserves the right to make changes to this

document and to the product described herein

without obligation to notify any person of such

changes.

Trademarks

RENISHAW® and the probe emblem used in the

RENISHAW logo are registered trademarks of

Renishaw plc in the UK and other countries.

apply innovation and Trigger Logic are

trademarks of Renishaw plc.

All other brand names and product names used

in this document are trade names, service marks,

trademarks, or registered trademarks of their

respective owners.

Patent notice

Features of OMP40 probes and features of similar

probes are the subject of one or more of the

following patents and/or patent applications:

EP 0,695,926 EP 0,390,342 EP 0,974,208

EP 1,130,557 EP 1,397,637 EP 1,373,995

EP 1,185,838 EP 1,477,767 EP 1,477,768

US 5,669,151 US 5,040,931 US 5,212,872

US 6,472,981 US 6,776,344 US 6,860,026

US 6,839,563 US 2002-219,886

US 2003-0,179,097

JP 2,945,709 JP 2001-53,062

JP 2003-526,170 JP 2004-522,961

JP 2004-530,234 JP 2001-520,844

Renishaw part no: H-2000-5022-05-A

Issued: 06 2006

PRELIMINARY

Safety ...................................................................3

Warranty ...............................................................3

Changes to equipment .........................................3

CNC machine .......................................................3

Caring for the probe..............................................3

Probe IP rating......................................................3

Related publications .............................................3

INSTALLATION

Typical probe system using OMI...........................4

Typical probe system using OMM and MI 12........5

Twin OMMs and remote indicator using MI 12 .....6

Battery speciﬁcation .............................................7

Installing the batteries...........................................8

Performance envelope with OMI...........................9

Performance envelope with OMM.......................10

OMP40 features .................................................11

OMP40 and system performance.......................12

OMP40 dimensions ............................................14

Probe/shank mounting........................................15

Stylus on-centre adjustment...............................16

Shank adaptor assembly (optional)....................17

OPERATION

Probe moves ......................................................19

Software requirements .......................................21

Typical probe cycles for machining centres ........23

Replacing batteries.............................................25

Modes of operation.............................................27

Reviewing current probe settings .......................31

Changing probe settings.....................................32

SERVICE AND MAINTENANCE........................36

FAULT FINDING.................................................37

PARTS LIST .......................................................41

Contents

EC DECLARATION OF CONFORMITY

Renishaw plc declares that the product:

Name Description

OMP40 Optical machine probe

has been manufactured in conformity with the following standards:

BS EN 61326: 1998/ Electrical equipment for measurement,

A1:1998/A2:2001 control and laboratory use - EMC

requirements. Immunity to annex A

- industrial locations. Emissions to class A

(non-domestic) limits.

and that it complies with the requirements of the following

directives (as amended):

89/336/EEC Electromagnetic compatibility

The above information is summarised from the full EC Declaration

of Conformity. A copy is available from Renishaw on request.

FCC

Information to user (FCC Section 15.19)

This device complies with Part 15 of the FCC rules. Operation is

subject to the following conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

Information to user (FCC Section 15.105)

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in

a commercial environment. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used

in accordance with this installation guide, may cause harmful

interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference, in which

case you will be required to correct the interference at your own

expense.

Information to user (FCC Section 15.21)

The user is cautioned that any changes or modiﬁcations not

expressly approved by Renishaw plc or authorised representative

could void the user’s authority to operate the equipment.

Preliminary information

Safety

Only qualiﬁed persons should change the switch

settings or replace fuses.

Where appropriate, remove the mains supply from

units before removing covers.

Warranty

Equipment requiring attention under warranty

must be returned to your supplier. No claims will

be considered where Renishaw equipment has

been misused, or repairs or adjustments have

been attempted by unauthorised persons.

Changes to equipment

Renishaw reserves the right to change

speciﬁcations without notice.

CNC machine

CNC machine tools must always be operated

by competent persons in accordance with the

manufacturer’s instructions.

Care of the probe

Keep system components clean and treat the

probe as a precision tool.

Probe IP rating

IPX8

Related publications

When you install the OMP40 probe system,

you will also need to refer to one or more of the

publications listed below for details of how to

install the ancillary equipment.

•Optical module machine (OMM) installation

and user’s guide – Renishaw part No.

H-2000-5044.

•MI 12 interface unit installation and user’s

guide – Renishaw part No. H-2000-5073.

•Optical machine interface (OMI) installation

and user’s guide – Renishaw part No.

H-2000-5062.

•PSU3 power supply unit installation and

user’s guide – Renishaw part No.

H-2000-5057.

Preliminary information

A workpiece set-up and inspection probe is, in

effect, another tool in the system. A probe cycle

may be included at any stage of the machining

process.

Signals are transmitted between the probe and

the machine’s control, via the OMI or alternatively

the OMM + MI 12. Interface units convert probe

signals into an acceptable form for the machine’s

control.

Stylus

CNC machining

centre spindle

Typical tool

setting probe

CNC

machine

control

Optional - PSU3

power supply unit

OMP40

inspection probe

Mounting bracket

Interface unit

Cable

Optional - PSU3

power supply unit

Workpiece

OMP - LEDs

(Light emitting diodes)

3 x receive diodes

12 x transmit LEDs

3 x probe status LEDs

OMI

Typical probe system using OMI

Stylus

CNC machining

centre spindle

Typical tool

setting probe

CNC

machine

control

OMP40

inspection probe

Cable

Optional - PSU3

power supply unit

Optional - PSU3

power supply unit

Workpiece

Mounting bracket

OMM

Interface unit

OMP - LEDs

(Light emitting diodes)

3 x receive diodes

12 x transmit LEDs

3 x probe status LEDs

Typical probe system using OMM and MI 12

MI 12

Twin OMM mounting

On large machine tools it is possible to provide

greater reception coverage by mounting two

OMMs connected to a single MI 12.

Remote indicator

The MI 12 interface contains an LED and acoustic

indicator. When the probe is triggered the LED

will change state and a beep is emitted.

If the MI 12 is hidden from the operator, a remote

lamp or bleeper may be placed in a position where

it is easily seen or heard.

Twin OMMs and remote indicator using MI 12

Battery speciﬁcation

Recommended batteries:

Ecocel: EB 1425, EB 1426

Saft: LS 14250 C, LS 14250

Sonnenschein: SL-750

Xeno: XL-050F

Unsuitable batteries (due to OMP40 power

requirements):

Dubilier: SB-AA02

Maxell: ER3S

Sanyo: CR 14250 SE

Sonnenschein: SL-350, SL-550

Tadiran: TL-4902 TL-5902, TL-2150, TL-5101

Varta: CR 1/2 AA

Battery speciﬁcation

The probe requires two ½ AA size Lithium Thionyl

Chloride batteries, individually rated at a voltage of

3.6 V. It is important that the batteries are supplied

in standard (button) form; batteries described as

tagged will have additional connection tag features

ﬁtted to the terminals and are not suitable.

Stand-by life 5% usage - 72 minutes/day Continuous use

Typical (days) Typical (days) Typical (hours)

Standard

power mode

Low power

mode

Standard

power mode

Low power

mode

Standard

power mode

Low power

mode

1900 1900 115 175 140 210

Battery life

8Installing the batteries

Installing the batteries

Step 1: Unlock the

battery cassette

Step 2: Insert the

batteries

Step 3: Lock the

battery cassette

Altri manuali per OMP40

Indice

Altri manuali Renishaw Strumento di misura

Renishaw

Renishaw XM-60 multi-axis calibrator Manuale utente

Renishaw

Renishaw RMP40 Manuale utente

Renishaw

Renishaw RENGAGE RMP400 Manuale utente

Renishaw

Renishaw RLP40 Manuale utente

Renishaw

Renishaw NC4 Guida alla configurazione

Renishaw

Renishaw RLP40 Manuale utente

Renishaw

Renishaw XK10 Manuale utente

Renishaw

Renishaw RTS Manuale utente

Renishaw

Renishaw Primo Manuale utente

Renishaw

Renishaw RMP600 Manuale utente

Renishaw

Renishaw OMM-S SPRINT Manuale utente

Renishaw

Renishaw Primo Manuale utente

Renishaw

Renishaw XL Series Manuale utente

Renishaw

Renishaw TS34 Manuale utente

Renishaw

Renishaw XL-80 Manuale utente

Renishaw

Renishaw RENGAGE RMP400 Manuale utente

Renishaw

Renishaw HCU2 Manuale utente

Renishaw

Renishaw RMP600 Manuale utente

Renishaw

Renishaw LP2 Manuale utente

Renishaw

Renishaw TRS1 Istruzioni operative

Renishaw

Renishaw MIH Manuale utente

Renishaw

Renishaw PH10 PLUS Series Manuale utente

Renishaw

Renishaw RMP600 Manuale utente

Renishaw

Renishaw RENGAGE RMP400 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente