Ricoh D392 Guida all'installazione
D392 Ring Binder Training
1
Slide 1
V-C3 TECHNICAL TRAINING
OPTIONAL RING BINDER (D392)
No additional notes
D392 Ring Binder Training
2
Slide 2
Overview
No additional notes
D392 Ring Binder Training
3
Slide 3
External View
Do not use the empty
space below the output
tray as a storage area.
Left Door
Output Tray
Right Door
D392 service manual, Details, Overview, Important Parts
D392 Ring Binder Training
4
Slide 4
Main Units
Pre-Punch
Jogger Unit Punch Unit
Binder Unit
Output Belt Unit
Stacker Unit
D392 service manual, Details, Overview, Important Parts
The binder unit contains the pre-bind jogger unit, ring supply unit, and clamp unit.
See the service manual for the locations of these within the binder unit.
D392 Ring Binder Training
5
Slide 5
Inform the Customers
The next few slides contain points to tell the customers after you finish the
installation.
D392 Ring Binder Training
6
Slide 6
Jams
Decals attached to the machine that provide
guidance for removing paper jams. Point out the
decal locations.
Detailed instructions on removing ring jams are
provided in the operating instructions under
"Removing Jammed Ring Combs".
No additional notes
D392 Ring Binder Training
7
Slide 7
Pulling out/Pushing in the Binder Unit
Always grip handle Mc8 when pulling out or pushing in the binder
unit.
Never touch any other surface of the binder unit when it is
moving.
To avoid injury the fingers, never push on the top of the binder
unit to slide it back into the finisher.
No additional notes
D392 Ring Binder Training
8
Slide 8
Do not Store Things Below the
Output Tray
Do not use the empty
space below the output
tray as a storage area.
Left Door
Output Tray
Right Door
D392 service manual, Details, Overview, Important Parts
Obstacles in this area (circled in the illustration) will interfere with the raising and
lowering of the tray and cause an error.
D392 Ring Binder Training
9
Slide 9
Ring Opener
The customer can use this to add pages to a document that
is already bound.
The additional pages must be printed with punching only
(no ring binding).
The ring binder is limited to 100 pages.
If the customer needs to bind a 120-page document:
First, do a run of 100 pages with ring binding enabled.
Then, do a 20-page run for the remaining pages, with punching only (no ring
binding).
Then, use the ring opener to open the ring and add the remaining pages to the
completed document.
For details about the ring opener, see the Operating Instructions for the ring
binder. Troubleshooting, Inserting Pages into an Existing Ring Bound
Booklet
D392 Ring Binder Training
10
Slide 10
Machine Component Overview
No additional notes
Indice
Altri manuali Ricoh Accessori per stampanti
Ricoh
Ricoh TCRU/ORU Istruzioni operative
Ricoh
Ricoh E-25C Guida rapida
Ricoh
Ricoh SP C220 Manuale operativo
Ricoh
Ricoh Aficio SG 3110DN Manuale utente
Ricoh
Ricoh TK2000 Manuale utente
Ricoh
Ricoh IM 2500 Series Manuale utente
Ricoh
Ricoh Priport HQ7000 Manuale utente
Ricoh
Ricoh 3800C Series Manuale utente
Ricoh
Ricoh LCIT PB3170 Guida rapida
Ricoh
Ricoh 7000 Manuale utente
Ricoh
Ricoh M15 Guida rapida
Ricoh
Ricoh InfoPrint 75 Manuale utente
Ricoh
Ricoh Aficio SG 3110DN Manuale utente
Ricoh
Ricoh Lily Manuale utente
Ricoh
Ricoh PB1080 Guida rapida
Ricoh
Ricoh DU5050 Guida rapida
Ricoh
Ricoh Aficio MP 2500 Manuale di servizio
Ricoh
Ricoh Aficio AP4510 Manuale utente
Ricoh
Ricoh 3532 Manuale utente
Ricoh
Ricoh M3 Guida rapida
