Ricoh SR3130 Guida rapida

Internal Finisher SR3130

Machine Code: D690

Field Service Manual

July, 2014

Subject to change

Revision Lists

Version Section Details

1.00 -

Initial release of this document.

Created this manual for D176/D177

series.

1.10

All

Revised all sections according to the

release of D197 series.

Modified some parts name.

Added the following sections:

> Covers and Trays

> Control Board

> Sensors

> Motors

> Stapler Unit

Read This First > Safety and Symbols Modified some icons.

Replacement and Adjustment > Inner

Finisher

Changed the pictures for Step 1 Step 3,

Step 4, and Step 5.

Added items need to be removed in Step

Replacement and Adjustment > Covers

and Trays > Finisher Upper Cover Deleted some steps.

Replacement and Adjustment > Covers

and Trays > Finisher Rear Cover Deleted all steps

Replacement and Adjustment > Covers

and Trays > Paper Output Tray Deleted some steps

Replacement and Adjustment >

Control Board

Added items need to be removed in Step

Deleted some steps.

Replacement and Adjustment >

Sensors > Entrance Sensor

Added the picture, and items need to be

removed in Step 3

Version Section Details

Replacement and Adjustment >

Sensors > Paper Exit Full Sensor

Added the picture, and items need to be

removed in Step 2.

Replacement and Adjustment >

Sensors > Paper Bail Home Position

Sensor

Added the picture, and items need to be

removed in Step 2.

Replacement and Adjustment >

Sensors > Paper Surface Detection

Sensor

Added the picture, and items need to be

removed in Step 4.

Replacement and Adjustment >

Sensors > Transport Sensor

Added the picture, and items need to be

removed in Step 2.

Replacement and Adjustment >

Sensors > Strike Roller Home Position

Sensor

Added the picture, and items need to be

removed in Step 4.

Replacement and Adjustment >

Sensors > Paper Output Guide Plate

Home Position Sensor

Added the picture, and items need to be

removed in Step 3.

Replacement and Adjustment >

Sensors > Shift Roller Home Position

Sensor

Modified items need to be removed in Step

Replacement and Adjustment >

Sensors > Stapler Home Position

Sensor

Deleted some steps

Added the picture, and items need to be

removed in Step 4.

Modified a Note for Step 5.

Replacement and Adjustment >

Sensors > Jogger Fence Home Position

Sensor (Front)

Added the picture, and items need to be

removed in Step 2.

Replacement and Adjustment >

Sensors > Jogger Fence Home Position

Sensor (Rear)

Added the picture, and items need to be

removed in Step 2.

Replacement and Adjustment >

Sensors > Stapler Tray Jam Detection

Sensor

Added the picture, and items need to be

removed in Step 3.

Added items need to be removed in Step

Version Section Details

Replacement and Adjustment >

Sensors > Paper Detection Sensor

Added the picture, and items need to be

removed in Step 3.

Modified a Note for Step 4.

Replacement and Adjustment > Motors

> Entrance Motor

Deleted some steps

Added the picture, and items need to be

removed in Step 3.

Replacement and Adjustment > Motors

> Tray Lift Motor

Added the picture, and items need to be

removed in Step 2 and Step 3.

Replacement and Adjustment > Motors

> Paper Bail Motor

Added the picture, and items need to be

removed in Step 2.

Replacement and Adjustment > Motors

> Paper Output Guide Plate Motor

Added the picture, and items need to be

removed in Step 2.

Replacement and Adjustment > Motors

> Strike Roller Motor

Added the picture, and items need to be

removed in Step 4

Replacement and Adjustment > Motors

> Shift Motor

Deleted some steps

Added the picture, and items need to be

removed in Step 2 and Step 3.

Replacement and Adjustment > Motors

> Stapler Displacement Motor

Modified the procedure.

Add a Note in Step 3.

Added the picture, and items need to be

removed in Step 4.

Replacement and Adjustment > Motors

> Jogger Fence Motor (Front / Rear)

Added the picture, and items need to be

removed in Step 2 and Step 3.

Replacement and Adjustment > Motors

> Transport Motor

Added the picture, and items need to be

removed in Step 4 and Step 5.

Version Section Details

Replacement and Adjustment > Motors

> Paper Output Motor

Added the picture, and items need to be

removed in Step 3.

Added items need to be removed in Step

Modified Step 5

Added the picture, and items need to be

removed in Step 5.

Added the picture, and items need to be

removed in Step 6

Safety and Symbols

This manual uses several symbols and abbreviations. The meaning of those symbols and abbreviations

are as follows:

Clip ring

Screw

Connector

Clamp

E-ring

SEF Short Edge Feed

LEF Long Edge Feed

[A] Short Edge Feed (SEF)

[B] Long Edge Feed (LEF)

Trademarks

Microsoft®, Windows®, and MS-DOS® are registered trademarks of Microsoft Corporation in the

United States and /or other countries.

PostScript® is a registered trademark of Adobe Systems, Incorporated.

PCL® is a registered trademark of Hewlett-Packard Company.

Ethernet® is a registered trademark of Xerox Corporation.

PowerPC® is a registered trademark of International Business Machines Corporation.

Other product names used herein are for identification purposes only and may be trademarks of their

respective companies. We disclaim any and all rights involved with those marks.

The Aim of Anti-tip Components and Precautions

The anti-tip components are necessary for meeting the requirements of IEC60950-1, the international

standard for safety.

The aim of these components is to prevent the products, which are heavy in weight, from toppling as a

result of people running into or leaning onto the products, which can lead to serious accidents such as

persons becoming trapped under the product. (U.S.: UL60950-1, Europe: EN60950-1)

Therefore, removal of such components must always be with the consent of the customer.

Do not remove them at your own judgment.

TABLE OF CONTENTS

Revision Lists........................................................................................................................................................1

Safety and Symbols............................................................................................................................................5

Trademarks.....................................................................................................................................................5

The Aim of Anti-tip Components and Precautions.......................................................................................6

1. Replacement and Adjustment

Inner Finisher.......................................................................................................................................................9

Covers and Trays.............................................................................................................................................12

Finisher Front Cover.....................................................................................................................................12

Finisher Upper Cover...................................................................................................................................13

Finisher Rear Cover......................................................................................................................................14

Paper Output Tray.......................................................................................................................................14

Paper Output Cover....................................................................................................................................15

Control Board...................................................................................................................................................16

Sensors..............................................................................................................................................................18

Entrance Sensor...........................................................................................................................................18

Paper Exit Full Sensor..................................................................................................................................19

Paper Bail Home Position Sensor...............................................................................................................19

Paper Surface Detection Sensor.................................................................................................................20

Transport Sensor..........................................................................................................................................20

Strike Roller Home Position Sensor.............................................................................................................21

Paper Output Guide Plate Home Position Sensor.....................................................................................23

Shift Roller Home Position Sensor...............................................................................................................24

Stapler Home Position Sensor.....................................................................................................................25

Jogger Fence Home Position Sensor (Front)..............................................................................................27

Jogger Fence Home Position Sensor (Rear)..............................................................................................28

Stapler Tray Jam Detection Sensor.............................................................................................................29

Paper Detection Sensor...............................................................................................................................30

Motors...............................................................................................................................................................33

Entrance Motor............................................................................................................................................33

Tray Lift Motor..............................................................................................................................................33

Paper Bail Motor..........................................................................................................................................35

Paper Output Guide Plate Motor...............................................................................................................35

Strike Roller Motor.......................................................................................................................................35

Shift Motor....................................................................................................................................................36

Stapler Displacement Motor.......................................................................................................................38

Jogger Fence Motor (Front / Rear)............................................................................................................40

Transport Motor...........................................................................................................................................42

Paper Output Motor....................................................................................................................................43

Stapler Unit.......................................................................................................................................................45