Rigol PHA2150 Manuale utente
User Guide
PHA High-Voltage Differential
Probe
Apr. 2022
RIGOL TECHNOLOGIES CO., LTD
RIGOL
PHA User Guide I
Guaranty and Declaration
Copyright
© 2022 RIGOL TECHNOLOGIES CO., LTD. All Rights Reserved.
Trademark Information
RIGOL® is the trademark of RIGOL TECHNOLOGIES CO., LTD.
Publication Number
UGE33101-1110
Notices
RIGOL products are covered by P.R.C. and foreign patents, issued and
pending.
RIGOL reserves the right to modify or change parts of or all the
specifications and pricing policies at the company’s sole decision.
Information in this publication replaces all previously released materials.
Information in this publication is subject to change without notice.
RIGOL shall not be liable for either incidental or consequential losses in
connection with the furnishing, use, or performance of this manual, as
well as any information contained.
Any part of this document is forbidden to be copied, photocopied, or
rearranged without prior written approval of RIGOL.
Product Certification
RIGOL guarantees that this product conforms to the national and industrial
standards in China as well as the ISO9001:2015 standard and the
ISO14001:2015 standard. Other international standard conformance
certifications are in progress.
Contact Us
If you have any problem or requirement when using our products or this
manual, please contact RIGOL.
E-mail: serv[email protected]om
Website: www.rigol.com
RIGOL
II PHA User Guide
General Safety Summary
CAUTION
This device involves the high-voltage measurement. To use the device safely
and ensure your personal safety, please carefully read and observe the
instructions specified in this manual before using the device.
Safety Terms and Symbols
Before using the device, read the following safety notices carefully.
The symbol printed on the device indicates that the
user should refer to a corresponding topic in the manual
(marked with the symbol) before using the relevant
function.
In the manual, the symbol indicates particularly
important information that the user should read before
using the device.
The symbol printed on the device indicates high
voltage warning.
The symbol printed on the device indicates test
ground.
RIGOL
PHA User Guide III
Safety Precautions
CAUTION
Beware of high voltages to avoid electric shock. Understand the maximum
input voltage for the probe.
Do not operate in wet conditions or in an explosive atmosphere.
Before use, please check whether the exterior of the probe is damaged. If
damaged, stop using it.
Turn off the circuit under test before connecting it to the probe.
When connecting the BNC output cable of the probe to the oscilloscope or
other devices, ensure that the BNC terminal is safely grounded.
After measurement, turn off the circuit first and then remove the probe.
RIGOL
IV PHA User Guide
Contents
Guaranty and Declaration .................................................. I
General Safety Summary .................................................. II
Safety Terms and Symbols ................................................ II
Safety Precautions .......................................................... III
General Inspection ............................................................ 1
PHA High-Voltage Differential Probe ................................. 2
Probe Components ............................................................ 4
Probe Component Description ............................................. 5
To Use the Probe ............................................................... 7
Preparation for Measurement .............................................. 7
Measurement Steps ........................................................... 7
Precautions During Measurement ........................................ 9
Failures and Troubleshooting ............................................ 11
Specifications .................................................................. 12
Technical Specifications .................................................... 12
Mechanical Characteristics ................................................ 13
Working Environment ....................................................... 14
Appendix ......................................................................... 15
Appendix 1 Max. Differential Mode Voltage vs Freq. ............ 15
Appendix 2 Package List ................................................... 15
Appendix 3 Warranty ....................................................... 15
RIGOL
PHA User Guide 1
General Inspection
1 Inspect the packaging
RIGOL has carried out strict inspections on each product before leaving
the factory. When you receive the product, please check whether the
packaging is intact. If the packaging has been damaged, do not dispose
the damaged packaging or cushioning materials until the shipment has
been checked for completeness and the probe has passed both electrical
and mechanical tests.
The consigner or carrier shall be liable for the damage to the instrument
resulting from shipment. RIGOL would not be responsible for free
maintenance/rework or replacement of the instrument.
2 Check the probe
In case of any mechanical damage, missing parts, or failure in passing the
electrical and mechanical tests, contact your RIGOL sales representative.
3 Check the accessories
Please check the accessories according to Appendix 2 Package List in
this manual. If the accessories are damaged or incomplete, please contact
your RIGOL sales representative.
RIGOL
2 PHA User Guide
PHA High-Voltage Differential Probe
The PHA series high-voltage differential probe (hereinafter referred to as PHA
series probe) connects to the voltage under test through the high-voltage
differential input cable to convert the input high voltage into the low voltage,
and then display the waveforms on the waveform measuring instrument by
connecting its output interface to the waveform measuring instrument.
Main Features
High bandwidth to meet the requirements of most high-frequency test
system
PHA0150: 70 MHz;
PHA1150: 100 MHz;
PHA2150: 200MHz
Diversified ranges and two attenuations to meet the requirements for
most common-mode test circuit
50X: 150 V (DC + peak AC);
500X: 1500 V (DC + peak AC);
5 MHz bandwidth limit[1]
For the low-frequency signal measurement, this function can reduce the
noise and interference of high-frequency signals to meet the
measurement requirement for the switching frequency of most switching
transistors (FETs) in the switching power supply.
High-voltage differential input mode
Higher input impedance and lower input capacitive on the input terminal
ensure accurate and fast measurement
Sound common-mode noise rejection
Standard BNC output terminal, compatible with the waveform measuring
instruments of most manufacturers.
Audible alarm beeper and visible indicator blinking for sounding the alarm;
RIGOL
PHA User Guide 3
the alarm can be disabled manually
Auto memory function, capable of automatically saving the working status
that was set before it is shutdown
Note[1]:
When the bandwidth is limited to 5 MHz, the internal output circuit of the PHA
series probe is connected to a 5 MHz low-pass network. The low-pass network
can reduce the high-frequency components, the noise, and the harmonics,
which is conducive to the testing and analysis of the low-frequency signals.
Measurement Scenarios
The PHA series probe is mainly used in scenarios where high-voltage floating
measurement is required, such as
Floating voltage
measurement
Strong current or high voltage
isolation measurement
Switching power supply
design
Power conversion and other
related designs
inverter/UPS power
measurement
welding/plating power
measurement
Inverter measurement Frequency conversion home
appliance measurement: induction
heating; induction cooker
Electronic ballast design Motor drive design
CRT display design Electrical engineering experiment
Low-voltage apparatus test Power electronics and power drives
experiment
RIGOL
4 PHA User Guide
Probe Components
The PHA series probe consists of PHA0150, PHA1150 and PHA2150. This
manual takes PHA1150 as an example to introduce the components of the PHA
series probe.
Figure 1 PHA1150 High-Voltage Differential Probe
By default, 500X is selected for OVERRANGE; FULL is selected for BANDWIDTH;
and ON is selected for AUDIBLE OVERRANGE.
Audible Overrange Alarm On/Off
Button
Bandwidth Switchover Button
Attenuation Switchover Button
Audible Overrange Alarm
Indicator
Bandwidt
h Indicator
Attenuation Indicator
Load Impedance
Coaxial Cable
Out
put
Maximum Input
Voltage
-
to
-
Earth
High
-
Voltage Differential Input Cable
Max. Differential Mode
Input
Voltage
High Voltage Danger Warning Sign
USB
Power Interface
Output Interface
Overrange Indicator
Indice
Altri manuali Rigol Strumento di misura
Rigol
Rigol DSA700 series Manuale utente
Rigol
Rigol RSA Series Manuale utente
Rigol
Rigol DS1000E Series, DS1000D Series Istruzioni operative
Rigol
Rigol RSA5065 Manuale utente
Rigol
Rigol RSA5065 Manuale utente
Rigol
Rigol RSA3000 Series Manuale di installazione e funzionamento
Rigol
Rigol DSA1000A Series Istruzioni operative
Rigol
Rigol DSA700 series Manuale utente
Rigol
Rigol RP1002C Manuale utente
Rigol
Rigol PCA1030 Manuale utente
Rigol
Rigol DSA800E Series Manuale utente
Rigol
Rigol RP1003C Manuale utente
Rigol
Rigol DSA1000 Series Guida per l'amministratore
Rigol
Rigol DS1000U Series Manuale utente
Rigol
Rigol PLA2216 Manuale utente
Rigol
Rigol DSA1000 Series Manuale di installazione e funzionamento
Rigol
Rigol DSA800E Series Istruzioni operative
Rigol
Rigol DL3021 Manuale utente
Rigol
Rigol RSA3045 Manuale utente
Rigol
Rigol RSA3030 Manuale utente
