Rigol DS4024 Manuale utente

RIGOL DS4024 OSCILLOSCOPE

STUDENT INNOVATION CENTER

ROOM 2222

Wade Warman

Dayon Royster

VERSION 1.0

2/11/2021

CONTENTS

OVERVIEW...........................................................................1

HEALTH & SAFETY INFO......................................................2

HAZARD CONTROL MEASURES/REQUIRED PPE...............3

FIRST AID PROCEDURES.....................................................4

WASTE DISPOSAL...............................................................5

SPILL/CLEAN UP PROCEEDURES.......................................6

OPERATIONS GUIDE...........................................................7

APPENDIX: FRONT PANEL FUNCTION OVERVIEW .........37

OVERVIEW

The purpose of this document is to provide standard operating

procedures for the use of the Rigol DS4024 Oscilloscope in room

2222 of the Student Innovation Center.

Prior to engaging in hands-on training and operation, these re-

quired training modules MUST be completed:

• Shop Safety Fundamentals

• Fire Safety and Fire Extinguisher Training

• Hazard Communication Training (aka Worker Right to Know)

• Portable Power Tool Safety

Chemical Vapors: Heating of solder can generate toxic vapors

and vapors with high volatile organic compounds (VOCs).

Hot Surfaces: Circuits and soldering equipment generate heat.

Such surfaces must be guarded and labeling must warn users of

the hazards.

Mechanical Hazards: Moving parts must be guarded to prevent

accidental contact. Guards must never be bypassed.

Electrical: Contact with energized parts can lead to injury or

even death. Before each use, inspect for any damaged wiring

and safeguards. Do not use if problems are found. Ensure the

oscilloscope is properly grounded and plugged directly into an

outlet.

HEALTH & SAFETY INFO

REQUIRED PPE:

• Safety glasses

• Closed toed shoes

Hazard Control Measures:

• Always use the grounding strap when operating equipment

• No food/drink

• Electric shock can be dangerous and possibly deadly! If you

are unfamiliar with the electricity requirements of your project,

ask a shop staff for assistance

HAZARD CONTROL MEASURES

AND REQUIRED PPE

FIRST AID PROCEDURES

BURNS: Minor burns are typically small, red, have swelling, and

can blister. Cool burns with cold water and continue until the

pain lessens. After cooling, cover with a dry, sterile bandage or

clean dressing. Consult a physician as needed.

CUTS/SCRAPES: Minor cuts and scrapes usually stop bleeding

on their own. If needed, apply gentle pressure with a clean

bandage or cloth and elevate the wound until bleeding stops.

Clean the wound and apply bandages. Consult a physician as

needed.

PINCH/CRUSH: Consult a physician as needed.

INHALATION: Ensure there is proper ventilation prior to use. If

needed, stop the procedure and move to a well ventilated

area. Consult a physician as needed.

EYES: Immediately irrigate the eyes at an eyewash station for at

least 15 minutes. Hold the eyelids away from the eyeball, mov-

ing eye in all directions to wash thoroughly behind the eyelids.

Consult a physician as needed.

All accidents and injuries occurring at work or in the course of

employment must be reported to the employee’s supervisor as

soon as possible (even if no medical attention is required).

http://www.ehs.iastate.edu/occupational/accidents-injuries

WASTE DISPOSAL

If you have left over parts/materials that are stil useable, you

may donate them to the shop for other users.

Dispose of any un-usable left over wires, components, solder

drips, etc. into the waste bin.

SPILL/CLEAN UP PROCEDURES

If using solder, do not touch solder drips for 30 seconds to allow

solder to cool. After 30 seconds, wipe off surface(s) and dispose

of in the waste bins.

OPERATIONS GUIDE

PLEASE NOTE: This guide is meant to cover the basic operations

of creating measurements using the oscilloscope.

For a more detailed description of the front panel features,

please refer to the Appendix.

Additionally, there are many features and fuctions available

that are beyond the scope of this guide and it is recommended

to read the manufacturers manual for a full detailed description

of all features, functions, and operations.

If you need help, please ask the shop staff!

1. Turn on the power to the oscilloscope and wait for it to ini-

tialize

Indice

Altri manuali Rigol Apparecchiature di prova

Rigol

Rigol DS1000E series Manuale utente

Rigol

Rigol DS1074B Manuale utente

Rigol

Rigol MS05000-4CH Manuale utente

Rigol

Rigol DS-5000 Series Manuale utente

Rigol

Rigol MSO8000A Series Manuale utente

Rigol

Rigol MSO4000 Series Manuale utente

Rigol

Rigol DS1102E Manuale utente

Rigol

Rigol RP1003C Manuale utente

Rigol

Rigol DS1000B Series Manuale utente

Rigol

Rigol DS1000Z-E Series Manuale utente

Rigol

Rigol DS2000 Series Manuale utente

Rigol

Rigol DS1000Z Series Istruzioni operative

Rigol

Rigol DS6000 Series Manuale utente

Rigol

Rigol MSO1000Z series Manuale utente

Rigol

Rigol DHO1000 Series Manuale utente

Rigol

Rigol MSO5152-E Manuale utente

Rigol

Rigol MSO8000A Series Manuale utente

Rigol

Rigol 2000 Series Manuale utente

Rigol

Rigol DG900 Pro Series Manuale utente

Rigol

Rigol DS1000Z-E Series Manuale utente

Rigol

Rigol MSO5000-E Series Manuale utente

Rigol

Rigol DS1102/4B Manuale utente

Rigol

Rigol DG800 Pro Series Istruzioni operative

Rigol

Rigol HDO4000 Series Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente