Rigol DS1000 Series Istruzioni operative

Programming Guide RIGOL

Publication Number: PGA02100-1210

June, 2008

DS1000, DS1000CA Series Digital Oscilloscope

DS1000CD, DS1000C, DS1000MD, DS1000M

DS1302CA, DS1202CA, DS1102CA, DS1062CA

RIGOL

Programming Guide for DS1000/DS1000CA Series

RIGOL products are protected by patent laws in and outside of the P.R. China.

Information in this publication replaces all previous corresponding material.

RIGOL Technologies, Inc. reserves the right to modify or change part of or all

the specifications and pricing policies at company‟s sole decision.

NOTE: RIGOL is registered trademark of RIGOL Technologies, Inc.

RIGOL

Programming Guide for DS1000/DS1000CA Series

Content

Chapter 1 Programming Introduction................................................ 1-1

Communication Ports..............................................................................1-2

Symbol Instruction .................................................................................1-3

The Abbreviation of the Commands .........................................................1-4

Chapter 2 Set the Command Systems ................................................ 2-1

System Commands.................................................................................2-2

Keyboard Commands..............................................................................2-7

Measurement commands ......................................................................2-19

Acquire Commands ..............................................................................2-28

Display System Commands ...................................................................2-31

Vertical Commands...............................................................................2-37

Horizontal Commands........................................................................... 2-44

Trigger Commands ............................................................................... 2-48

Trigger control commands ......................................................................2-48

Trigger Mode Commands ........................................................................2-53

LA Commands (Only for DS1000*D Series）........................................... 2-77

Math Commands..................................................................................2-81

Waveform commands ...........................................................................2-83

Chapter 3 Command Quick Reference................................................ 3-1

RIGOL

Programming Guide for DS1000/DS1000CA Series

1-1

Chapter 1 Programming Introduction

This book provides guidance to the remote control programming of the DS1000 and

DS1000CA series digital oscilloscopes.

It includes the necessary conceptual information, the command structure for the

subsystem and the case in the application. Users can carry on the remote control to

the oscilloscope or do the further development according to this manual.

NOTE: The Programming Reference is applicable to the Oscilloscope of

the firmware version above 01.02.18.

RIGOL

Programming Guide for DS1000/DS1000CA Series

1-2

Communication Ports

Computers communicate with the oscilloscope by sending and receiving messages

over an I/O port, such as USB, GPIB port or a RS-232 port. Commands appear as

ASCII character strings embedded inside the output statements of a “host” language

available on your computer. The input commands of the host language are used to

read responses from the oscilloscope.

Basic operations that you can do with a computer and an oscilloscope include:

Set up the oscilloscope.

Make measurements.

Retrieve data (waveforms or measurements) from the oscilloscope.

RIGOL

Programming Guide for DS1000/DS1000CA Series

1-3

Symbol Instruction

1. Command Separator :

Commands usually begin with a colon (:). Queries are formed by adding a question

mark (?) to the end of the commands. The return values of the queries are mostly

expressed in scientific count such as 2.64e+00.

2. Blank Space □

Blank space is used to separate the instruction from the program data. If the

instruction does not require any program data, blank space is not needed.

3. Braces { }

When several elements, separated by a vertical line (|) are enclosed by braces, { },

only one element may be selected. For example, {ON | OFF} indicates that only ON

or OFF may be selected, not both.

4. Square Brackets [ ]

Items enclosed in square brackets [ ] are optional.

5. Triangle Brackets < >

Items enclosed in < > should be replaced by a numericalvalue or character string.

RIGOL

Programming Guide for DS1000/DS1000CA Series

1-4

The Abbreviation of the Commands

Some commands are too long to memory and spell. In order to reduce your work

and memory difficulty, we set the abbreviation of the commands.

The abbreviation rule is to omit all the small letters in the instruction header.

For example:

:TRIGger:ALTernation:SLOPe:LEVelA

can be entered as:

:TRIG:ALT:SLOP:LEVA

RIGOL

Programming Guide for DS1000/DS1000CA Series

2-1

Chapter 2 Set the Command Systems

For remote control programming, DS1000 and DS1000CA Series oscilloscopes

have the following command groups:

System Commands

Keyboard Commands

Measurement Commands

Acquire Commands

Display Commands

Vertical Commands

Horizontal Commands

Trigger Commands

LA Commands（Only for DS1000*D Series）

Math Commands

Waveform Commands

RIGOL

Programming Guide for DS1000/DS1000CA Series

2-2

System Commands

System commands are the fundamental commands for the operation of an

oscilloscope. They can either be used as individual instructions or in conjunction with

other instructions to form a script.

System Commands include:

*IDN?

:RUN

:STOP

:AUTO

:FORCetrig

:Trig%50

:HARDcopy

:INFO:LANGuage

:COUNter:ENABle

:BEEP:ENABle

:BEEP:ACTion

We will give specific explanations for each command in the following part.

Altri manuali per DS1000 Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Rigol Apparecchiature di prova

Rigol

Rigol MSO1000Z series Manuale utente

Rigol

Rigol DHO4000 Series Manuale di installazione e funzionamento

Rigol

Rigol RP7080S Manuale utente

Rigol

Rigol MSO4000 Series Manuale utente

Rigol

Rigol DS4024E Manuale utente

Rigol

Rigol DS1000 Series Manuale utente

Rigol

Rigol DS2000 Series Manuale utente

Rigol

Rigol MSO8064 Manuale utente

Rigol

Rigol DHO1000 Series Manuale utente

Rigol

Rigol DHO1202 Manuale utente

Rigol

Rigol MSO4000 Series Manuale utente

Rigol

Rigol DS1000E series Manuale utente

Rigol

Rigol DS2000A Series Manuale utente

Rigol

Rigol DG900 Pro Series Manuale utente

Rigol

Rigol MS05000-4CH Manuale utente

Rigol

Rigol MSQ7054 Manuale utente

Rigol

Rigol DS1000Z Series Guida rapida

Rigol

Rigol DS2000 Series Guida rapida

Rigol

Rigol HDO1000 Series Manuale utente

Rigol

Rigol DS70000 Series Manuale utente

Rigol

Rigol RP1018H Manuale utente

Rigol

Rigol DS6104 Manuale di installazione e funzionamento

Rigol

Rigol HDO1000 Series Manuale utente

Rigol

Rigol DS1000C Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente