Rigol DS2000A Series Manuale utente

Series

Digital Oscilloscope

Series

Digital Oscilloscope

DS2000A

DS2000A Series is the new mainstream digital scope to meet the

customer's applications with its innovative technology, industry

leading specifications, powerful trigger functions and broad

analysis capabilities.

Wider vertical range(500uV/div ~ 10V/div), lower noise  oor,

Better for small signal capturing

Bandwidth 70MHz,100MHz,200MHz,300MHz,standard 50Ω input

Max. Sample Rate 2G Sa/s

Standard Memory Depth up to14Mpts,Optional Memory Depth

up to 56Mpts

Innovative "UltraVision" technology

Waveform capture rate up to 50,000 wfs/s

Up to 256 Levels intensity grading waveform display

Up to 65,000 frames Hardware based Real Time waveform,

Record, Replay & Analysis functions(Std.)

A variety of trigger and serial bus decording

functions(RS232,I2C,SPI,CAN)

Built-in 2 Ch Waveform generator (DS2000A-S)

Complete connectivities: USB Host& Device, LAN(LXI), AUX

Compact size, light weight, easy to use

8 inch TFT (800x480) WVGA

DS2000A Series Digital Oscilloscope

Models and Key Specications

RUN/STOP/SINGLE

Decoding

Waveform record&replay

Independent control for each channel

Deeper Memory Depth (Std.14Mpts,Opt.56Mpts)

Higher Waveform Capture Rate (Up to 50,000 wfms/s)

Realtime Waveform Record,Replay & Analysis (Up to 65,000 frames)

Multi-level Intensity Grading Display (Up to 256 Levels)

Innovative UltraVision technology

Product Dimensions: Width X Height X Depth=361.6 mm×179.6 mm×130.8 mm Weight: 3.9 kg ± 0.2 kg(Without Package)

1RIGOL

Model Number DS2072A DS2072A-S DS2102A DS2102A-S DS2202A DS2202A-S DS2302A DS2302A-S

Analog BW 70 MHz 100MHz 200 MHz 300 MHz

Channels 2

Max. Sample rate 2GSa/s (Single-channel)、 1GSa/s(Dual-channel）

Max. Memory Depth 14Mpts（std.）、56Mpts（option）

Max. Waveform

Capture rate 50,000 wfms/s

Real Time waveform

Record,

Replay and Analysis

function

Up to 65，000 Frames

Std. Probes RP3300A 350MHz BW Passive Probe:2 sets

Built-in 2Ch 25MHz

Source No Yes No Yes No Yes No Yes

Wider Vertical range(500uV/div~10V/div

)

,Lower noise

oor, Better for small signal capturing

Full bandwidth,Lower Overshoot, Perfect frequency

response design

UltraVision: Deeper memory(Std.14Mpts,Opt.56Mpts)

UltraVision:Realtime waveform record,replay,analysis

function (std.)

Std. serial bus trigger functions(RS232,I2C,SPI)

UltraVision: Deeper Memory with Multi-Level intensity

grading display(Up to 256 levels)

UltraVision: Up to 50,000 wfms/s Waveform capture rate

Optional Serial bus decoding function with listing display

RIGOL 2

Versatile Trigger Functions

(

Runt, Nth Edge,Setup/Hold …

)

Runt Trigger

Std. Advanced Math Function

Built-in 2CH Source(DS2000A-S)

Std. Mask Test Function

Arb function of the Built-in 2CH Source (DS2000A-S)

Complete Connectivity(USB Host,USB Device,LAN,AUX)

Automatic measurements with statistics

3RIGOL

RIGOL 4

RIGOL Probes supported by DS2000A Series:

RIGOL Passive Probes RIGOL Active & Current Probes

Model Number Tpye Description

RP1001C

Current

Probe

BW:DC~300kHz,

Max.DC:±100A,

AC P-P:200A,AC RMS:70A

Compatibility：All RIGOL Scopes.

RP1002C

Current

Probe

BW:DC~1MHz,

Max.DC:±70A,

AC P-P:140A,AC RMS:50A

Compatibility：

All RIGOL Scopes.

RP1003C

Current

Probe

BW:DC~50MHz,

Max.AC RMS:30A

AC Peak:50A(Noncontinuous)

Compatibility：

All RIGOL Scopes.

Must order RP1000P Power supply.

RP1004C

Current

Probe

BW:DC~100MHz,

Max. AC RMS:30A,

AC Peak:50A(Noncontinuous)

Compatibility：

All RIGOL Scopes.

Must order RP1000P Power supply.

RP1005C

Current

Probe

BW:DC~10MHz,

Max.150 A rms,

300 A peak (Noncontinuous),

500 A peak (@pulse width <=30 ms)

Compatibility：

All RIGOL Scopes.

Must order RP1000P Power supply.

RP1000P

Power

Supply

Power supply for

RP1003C,RP1004C,RP1005C,

support 4 channels.

RP1025D

High

Voltage

Differential

Probe

BW:25MHz;

Max. Voltage ≤ 1400Vpp

Compatibility：

All RIGOL Scopes.

RP1050D

High

Voltage

Differential

Probe

BW:50MHz;

Max. Voltage ≤ 7000Vpp

Compatibility：

All RIGOL Scopes.

RP1100D

High

Voltage

Differential

Probe

BW:100MHz;

Max. Voltage ≤ 7000Vpp

Compatibility:

All RIGOL scopes

Model Number Tpye Description

RP2200

High Z

Probe

1X: DC~7MHz

10X:DC~150MHz

Compatibility：

All RIGOL Scopes.

RP3300A

High Z

Probe

1X: DC~8MHz

10X:DC~350MHz

Compatibility：

All RIGOL Scopes.

RP3500A

High Z

Probe

DC~500MHz

Compatibility：

All RIGOL Scopes.

RP1300H

High

Voltage

Probe

DC~300MHz

CATI 2000V(DC+AC),

CATII 1500 V(DC+AC)

Compatibility：

All RIGOL Scopes.

RP1050H

High

Voltage

Probe

DC~50MHz

DC:0~15KV

DC,AC:pulse <=30KVp-p,

AC:sine wave <=10KVrms

Compatibility：

All RIGOL Scopes.

Specications

All the specications are guaranteed except parameters marked with “Typical” and the oscilloscope needs to operate for more than 30 minutes under the specied

operation temperature.

5RIGOL

Sample Mode Real-time Sample

Real Time Sample Rate 2 GSa/s (single-channel)

1 GSa/s (dual-channel)

Peak Detect 500 ps (single-channel)

1 ns (dual-channel)

Averaging After both the channels nish N samples at the same time, N can be 2, 4, 8, 16, 32, 64, 128, 256, 512,

1024, 2048, 4096 or 8192.

High Resolution 12 bits of resolution when ≥5 μs/div @ 1 GSa/s (or ≥10 μs/div @ 500 MSa/s).

Memory Depth single-channel: Auto, 14k pts, 140k pts, 1.4M pts, 14M pts and 56M pts (option) are available

dual-channel: Auto, 7k pts, 70k pts, 700k pts, 7M pts and 28M pts (option) are available

Input

Number of Channels Two channels

Input Coupling DC, AC or GND

Input Impedance (1MΩ±1%)||(16 pF±3 pF)

or 50 Ω±1.5%

Probe Attenuation Coefcient 0.01X to 1000X, in 1-2-5 step

Maximum Input Voltage (1MΩ) Maximum Input Voltage of the Analog Channel

CAT I 300 Vrms, CAT II 100 Vrms,

Transient Overvoltage 1000 Vpk

with RP2200 10:1 probe: CAT II 300 Vrms

with RP3300A 10:1 probe: CAT II 300 Vrms

with RP3500A 10:1 probe: CAT II 300 Vrms

Horizontal

Timebase Scale DS2302A: 1 ns/div to 1000 s/div

DS2202A: 2.000 ns/div to 1000 s/div

DS2102A/DS2072A : 5.000 ns/div to 1000 s/div

Timebase Accuracy1≤ ± 25 ppm

Clock Drift ≤ ± 5 ppm/year

Max Delay Range Pre-trigger (negative delay): ≥1 screen width

Post-trigger (positive delay): 1 s to 100,000 s

Timebase Mode Y-T, X-Y, Roll, Delayed Sweep

Number of XYs 1

Waveform Capture Rate250,000 wfms/s (dots display)

Vertical

Bandwidth (-3dB) DS2302A: DC to 300 MHz

DS2202A: DC to 200 MHz

DS2102A: DC to 100 MHz

DS2072A: DC to 70 MHz

Single-shot Bandwidth DS2302A: DC to 300 MHz

DS2202A: DC to 200 MHz

DS2102A: DC to 100 MHz

DS2072A: DC to 70 MHz

Vertical Resolution 8bit

Vertical Scale 500 μV/div to 1 V/div (50Ω)

500 μV/div to 10 V/div (1MΩ)

Offset Range 500 μV /div to 50 mV/div: ± 2 V

51 mV/div to 200 mV/div: ± 10 V

205 mV/div to 2 V/div: ± 50 V

2.05 V/div to 10 V/div: ± 100 V

Bandwidth Limit 1 DS2302A/DS2202A : 20 MHz/100 MHz

DS2102A/DS2072A : 20 MHz

Low Frequency Response

(AC Coupling, -3dB) ≤5 Hz (on BNC)

Calculated Rise Time 1 DS2302A: 1.2ns

DS2202A: 1.8 ns

DS2102A: 3.5 ns

DS2072A: 5 ns

DC Gain Accuracy ±2% full scale

Sample

DC Offset Accuracy ±0.1 div ± 2 mV ± 1% offset value

Channel to Channel Isolation DC to maximum bandwidth: >40 dB

Trigger

Trigger Level Range Internal ± 5 div from center of the screen

EXT ± 4 V

Trigger Mode Auto, Normal, Single

Holdoff Range 100 ns to 10 s

High Frequency Rejection175 kHz

Low Frequency Rejection175 kHz

Trigger Sensitivity 1 div (below 10 mV or noise rejection is enabled)

0.3 div (above 10 mV and noise rejection is disabled)

Edge Trigger

Edge Type Rising, Falling, Rising&Falling

Pulse Trigger

Pulse Condition Positive Pulse Width (greater than, lower than, within specic interval)

Negative Pulse Width (greater than, lower than, within specic interval)

Pulse Width Range 2 ns to 4 s

Runt Trigger

Pulse Width Condition None, >, <, <>

Pulse Polarity Positive, Negative

Pulse Width Range 2 ns to 4 s

Windows Trigger (Option)

Windows Type Rising, Falling, Rising&Falling

Trigger Position Enter, Exit, Time

Windows Time 16 ns to 4 s

Nth Edge Trigger (Option)

Edge Type Rising, Falling

Idle Time 16 ns to 10 s

Edge Number 1 to 65535

Slope Trigger

Slope Condition Positive Slope (greater than, lower than, within specic interval)

Negative Slope (greater than, lower than, within specic interval)

Time Setting 2 ns to 4 s

Video Trigger (HDTV Option)

Signal Standard Support standard NTSC, PAL and SECAM broadcasting standards; support 480P, 576P, 720P, 1080P and

1080I HDTV standards

Pattern Trigger

Pattern Setting H, L, X, Rising, Falling

Delay Trigger (Option)

Edge Type Rising, Falling

Delay Type >, <, <>, ><

Delay Time 2 ns to 4 s

TimeOut Trigger (Option)

Edge Type Rising, Falling, Rising&Falling

Timeout time 16 ns to 4 s

Duration Trigger (Option)

Pattern H, L, X

Trigger Condition >, <, <>

Duration Time 2 ns to 4 s

Setup/Hold Trigger

Edge Type Rising, Falling

Data Type H, L

Setup Time 2 ns to 1 s

Hold Time 2 ns to 1 s

RS232/UART Trigger

Polarity Normal, Invert

Trigger Condition Start, Error, Check Error, Data

Baud Rate 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, User

Data Bits 5 bit, 6 bit, 7 bit, 8 bit

I2C Trigger

Trigger Condition Start, Restart, Stop, Missing ACK, Address, Data, A&D

Address Bits 7 bit, 8 bit, 10 bit

Address Range 0 to 127, 0 to 255, 0 to 1023

Byte Length 1 to 5

RIGOL 6

SPI Trigger

Trigger Condition Timeout

Timeout Value 100 ns to 1 s

Data Bits 4 bit to 32 bit

Data Line Setting H, L, X

CAN Trigger

Signal Type Rx, Tx, CAN_H, CAN_L, Differential

Trigger Condition SOF, EOF, Frame Type, Frame Error

Baud 10 kbps, 20 kbps, 33.3 kbps, 50 kbps, 62.5 kbps, 83.3 kbps, 100 kbps, 125 kbps, 250 kbps, 500 kbps, 800

kbps, 1 Mbps, User

Sample Point 5% to 95%

Frame Type Data, Remote, Error, OverLoad

Error Type Bit Fill, Answer Error, Check Error, Format Error, Random Error

USB Trigger (Option)

Signal Speed Low Speed, Full Speed

Trigger condition SOP, EOP, RC, Suspend, Exit Suspend

Measure

Cursor

Manual Mode

Voltage Deviation between Cursors (△V)

Time Deviation between Cursors (△T)

Reciprocal of △T (Hz) (1/△T)

Track Mode Voltage and Time Values of the Waveform Point

Auto Mode Allow to display cursors during auto measurement

Auto Measurement

Measurements of Maximum, Minimum, Peak-Peak Value, Top Value, Bottom Value, Amplitude, Average,

Mean Square Root, Overshoot, Pre-shoot, Area, Period Area, Frequency, Period, Rise Time, Fall Time,

Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle, Delay AB, Delay

AB, Phase AB, Phase AB

Number of Measurements Display 5 measurements at the same time.

Measurement Range Screen or cursor.

Measurement Statistic Average, Max, Min, Standard Deviation, Number of Measurements

Frequency Counter Hardware 6 bits frequency counter

(channels are selectable)

Math Operation

Waveform Operation A+B, A-B, A×B, A/B, FFT, Editable Advanced Operation, Logic Operation

FFT Window Function Rectangle, Hanning, Blackman, Hamming

FFT Display Split, Full Screen

FFT Vertical Scale Vrms, dB

Logic Operation AND, OR, NOT, XOR

Math Function Intg, Diff, Log, Exp, Sqrt, Sine, Cosine, Tangent

Number of Buses for Decoding 2

Decoding Type Parallel (standard), RS232/UART (option), I2C (option) , SPI (option)

Display

Display Type 8.0 inches (203 mm) TFT LCD display

Display Resolution 800 Horizontal ×RGB×480 Vertical Pixel

Display Color 160,000 Color (TFT)

Persistence Time Min, 50ms, 100ms, 200ms, 500ms, 1 s, 2 s, 5 s, 10 s, 20 s, Innite

Display Type Dots, Vectors

Real-time Clock Time and Date (user adjustable)

Signal Source (DS2000A-S)

Sample Rate 200 MSa/s

Vertical Resolution 14 bits

Max. Frequency 25 MHz

Standard Waveform Sine, Square, Pulse, Ramp, Noise, DC

Arbitrary Waveform Sinc, ExpRise, ExpFall, ECG, Gauss, Lorentz, Haversine

Sine Frequency Range 0.1 Hz to 25 MHz

Flatness ±0.5 dB (relative to 1 kHz)

Harmonic Distortion -40 dBc

Spurious (non-harmonic) -40 dBc

THD 1%

SNR 40 dB

7RIGOL

Square/Pulse Frequency Range 0.1 Hz to 15 MHz

Rise Time/Fall Time <15 ns

Overshoot <5%

Duty Cycle 10% to 90%

Duty Cycle Resolution 1% or 10 ns (the larger one)

Minimum Pulse Width 20ns

Pulse Width Resolution 10 ns or 5 bits (the larger one)

Jitter 500 ps

Ramp Frequency Range 0.1 Hz to 100 kHz

Linearity 1%

Symmetry 0 to 100%

Noise Bandwidth 25 MHz (typical)

Built-in Waveform Frequency Range 0.1 Hz to 1 MHz

Arbitrary Waveform Frequency Range 0.1 Hz to 10 MHz

Length 2 to 16 kpts

Internal Storage Locations 10

Frequency Accuracy 100 ppm (<10 kHz)

50 ppm (>10 kHz)

Resolution 0.1 Hz or 4 bits (the larger one)

Amplitude Output Range 20 mVpp to 5 Vpp, HighZ

10 mVpp to 2.5 Vpp, 50 Ω

Resolution 100 μV or 3 bits (the larger one)

Accuracy 2% (1 kHz)

DC Offset Range ±2.5 V, HighZ

±1.25 V, 50 Ω

Resolution 100 μV or 3 bits (the larger one)

Accuracy ±2% of Offset setting

Interface

Standard Ports USB HOST (support USB-GPIB), USB DEVICE, LAN, Aux Output (TrigOut/PassFail)

Printer Compatibility PictBridge

General Specications

Probe Compensation Output

Output Voltage1About 3 V, peak-peak

Frequency11 kHz

Power

Power Voltage 100 to 240 V, 45 to 440 Hz

Power Maximum 50 W

Fuse 2 A, T Degree, 250 V

Environment

Temperature Range Operating: 0℃to +50℃

Non-operating: -20℃to +70℃

Cooling Method fan cooling

Humidity Range 0℃to +30℃: ≤95％Relative Humidity

+30℃to +40℃: ≤75％Relative Humidity

+40℃to +50℃: ≤45％Relative Humidity

Altitude Operating: under 3,000 meters

Non-operating: under 15,000 meters

Mechanical Specications

Size3Width×Height×Depth = 361.6 mm× 179.6 mm×130.8 mm

Weigt4Package Excluded 3.9 kg ± 0.2 kg

Package Included 4.5 kg ± 0.5 kg

Calibration Interval

The recommended calibration interval is one year.

Regulatory Information

Electromagnetic Compatibility 2004/108/EC

Execution standard EN 61326-1:2006 EN 61326-2-1:2006

Safety UL 61010-1:2004; CAN/CSA-C22.2 NO. 61010-1-2004;

EN 61010-1:2001; IEC 61010-1:2001

Note: 1 Typical.

2 Maximum value with 20 ns, single-channel, dots display and auto memory depth.

3 Supporting legs and handle folded, knob height included.

4 Standard conguration.

RIGOL 8

RIGOL®is the registered trademark of RIGOL Technologies, Inc. Product information in this document subject to update without notice. For

the latest information about RIGOL's products, applications and services, please contact local RIGOL of ce or access RIGOL of cial website:

www.rigol.com October,2013

Ordering Information

Warranty

Three-year warranty,excluding probes and accessories.

Headquarter

RIGOL TECHNOLOGIES, INC.

No.156,Cai He Village,

Sha He Town,

Chang Ping District, Beijing,

102206 P.R.China

Tel:+86-10-80706688

Fax:+86-10-80705070

Email: [email protected]

USA

RIGOL TECHNOLOGIES

USA,INC.

7401 First Place,Suite N

Oakwood Village

OH 44146,USA

Tel/Fax: 440-232-4488

Toll free: 877-4-RIGOL-1

Email: [email protected]

Europe

RIGOL TECHNOLOGIES EU,

GmbH

Lindbergh str. 4

82178 Puchheim, Germany

Tel: +49(0)89-8941895-0

Email: info-europe@

rigoltech.com

Description Order Number

Model 70MHz,2-channel DS2072A

70MHz,2-channel + 2-channel Signal Source DS2072A-S

100MHz,2-channel DS2102A

100MHz,2-channel + 2-channel Signal Source DS2102A-S

200MHz,2-channel DS2202A

200MHz,2-channel + 2-channel Signal Source DS2202A-S

300MHz,2-channel DS2302A

300MHz,2-channel + 2-channel Signal Source DS2302A-S

Standard Accessories Power Cord conforming to the standard of the country -

USB Data Cable CB-USBA-USBB-FF-150

2 Passive Probes (350 MHz) RP3300A

Quick Guide -

Resource CD (User’s Guide and Application Software) -

Optional Accessories Rack Mount Kit RM-DS2000A

Deep Memory Option 56Mpts(single channel)/28Mpts(dual channel) MEM-DS2000A

Advanced trigger functions Windows, Nth Edge,HDTV,Delay, Time Out,

Duration, USB

AT-DS2000A

Decoding Options RS232,I2C,SPI Decoding Kit SD-DS2000A

CAN Analysis kit(Trigger+Decoding) CAN-DS2000A

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Rigol Apparecchiature di prova

Rigol

Rigol VS5000 Series Manuale utente

Rigol

Rigol RP1018H Manuale utente

Rigol

Rigol MSO4000 Series Manuale utente

Rigol

Rigol DS7034 Manuale del proprietario

Rigol

Rigol DS1000B Series Manuale utente

Rigol

Rigol HDO1000 Series Manuale utente

Rigol

Rigol MSO8064 Manuale utente

Rigol

Rigol DS70000 Series Manuale utente

Rigol

Rigol DS8000-R Series Manuale utente

Rigol

Rigol DSO-5200A Manuale utente

Rigol

Rigol DS1302CA Manuale utente

Rigol

Rigol DS4024 Manuale utente

Rigol

Rigol DS1204B Istruzioni operative

Rigol

Rigol RP7000 Series Manuale utente

Rigol

Rigol 2000 Series Manuale utente

Rigol

Rigol MSO5072 Manuale utente

Rigol

Rigol MSO7000 Series Manuale utente

Rigol

Rigol MSO4000 Series Manuale utente

Rigol

Rigol DS1000Z-E Series Manuale utente

Rigol

Rigol DS1000CA series Istruzioni operative

Rigol

Rigol DS1000Z Series Manuale utente

Rigol

Rigol DS1074B Manuale utente

Rigol

Rigol MS05000-4CH Manuale utente

Rigol

Rigol DS1000Z Series Istruzioni operative

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente