Rigol DS6000 Series Manuale utente

RIGOL

Service Guide

DS6000 Series Digital Oscilloscope

Feb. 2014

RIGOL Technologies, Inc.

RIGOL

DS6000 Service Guide

Guaranty and Declaration

Trademark Information

RIGOL is a registered trademark of RIGOL Technologies, Inc.

Publication Number

SGA06101-1110

Notices

RIGOL products are protected by patent law in and outside of P.R.C.

RIGOL reserves the right to modify or change parts of or all the specifications

and pricing policies at company’s sole decision.

Information in this publication replaces all previously corresponding material.

RIGOL shall not be liable for losses caused by either incidental or consequential

in connection with the furnishing, use or performance of this manual as well as

any information contained.

Any part of this document is forbidden to be copied or photocopied or rearranged

without prior written approval of RIGOL.

Product Certification

RIGOL guarantees this product conforms to the national and industrial standards in

China as well as the ISO9001:2008 standard and the ISO14001:2004 standard. Other

international standard conformance certification is in progress.

If you have any problem or requirement when using our products or this manual,

please contact RIGOL.

E-mail: service@rigol.com

Website: www.rigol.com

RIGOL

DS6000 Service Guide

Safety Requirement

General Safety Summary

Please review the following safety precautions carefully before putting the instrument

into operation so as to avoid any personal injuries or damages to the instrument and

any product connected to it. To prevent potential hazards, please use the instrument

only specified by this manual.

Use Proper Power Cord.

Only the power cord designed for the instrument and authorized by local country

could be used.

Ground The Instrument.

The instrument is grounded through the Protective Earth lead of the power cord. To

avoid electric shock, it is essential to connect the earth terminal of power cord to the

Protective Earth terminal before any inputs or outputs.

Connect the Probe Correctly.

Do not connect the ground lead to high voltage since it has the isobaric electric

potential as ground.

Observe All Terminal Ratings.

To avoid fire or shock hazard, observe all ratings and markers on the instrument and

check your manual for more information about ratings before connecting.

Use Proper Overvoltage Protection.

Make sure that no overvoltage (such as that caused by a thunderstorm) can reach the

product, or else the operator might expose to danger of electrical shock.

Do Not Operate Without Covers.

Do not operate the instrument with covers or panels removed.

Use Proper Fuse.

Please use the specified fuses.

Avoid Circuit or Wire Exposure.

Do not touch exposed junctions and components when the unit is powered.

Do Not Operate With Suspected Failures.

If you suspect damage occurs to the instrument, have it inspected by qualified service

personnel before further operations. Any maintenance, adjustment or replacement

especially to circuits or accessories must be performed by RIGOL authorized

personnel.

RIGOL

DS6000 Service Guide

III

Keep Well Ventilation.

Inadequate ventilation may cause increasing of temperature or damages to the device.

So please keep well ventilated and inspect the intake and fan regularly.

Do Not Operate in Wet Conditions.

In order to avoid short circuiting to the interior of the device or electric shock, please

do not operate in a humid environment.

Do Not Operate in an Explosive Atmosphere.

In order to avoid damages to the device or personal injuries, it is important to operate

the device away from an explosive atmosphere.

Keep Product Surfaces Clean and Dry.

To avoid the influence of dust and/or moisture in air, please keep the surface of device

clean and dry.

Electrostatic Prevention.

Operate in an electrostatic discharge protective area environment to avoid damages

induced by static discharges. Always ground both the internal and external conductors

of the cable to release static before connecting.

Proper Use of Battery

The battery must not be exposed to high temperature or in contact with fire. Keep it

out of the reach of children. Improper change of battery (note: lithium battery) may

cause explosion. Use RIGOL specified battery only.

Handling Safety

Please handle with care during transportation to avoid damages to buttons, knob

interfaces and other parts on the panels.

RIGOL

DS6000 Service Guide

Safety Terms and Symbols

Terms in this Manual. These terms may appear in this manual:

WARNING

Warning statements indicate the conditions

or practices that could result in

injury or loss of life.

CAUTION

Caution statements indicate the conditions or practices that could result in

damage to this product or other property.

Terms on the Product. These terms may appear on the Product:

DANGER

indicates an injury or hazard may immediately happen.

WARNING

indicates an injury or hazard may be accessible potentially.

CAUTION

indicates a potential damage to the instrument or other property might

occur.

Symbols on the Product. These symbols may appear on the product:

Hazardous

Voltage

Please Refer to

Manuals

Protective

Earth

Terminal

Chassis

Ground

Test

Ground

RIGOL

DS6000 Service Guide

DS6000 Series Overview

Being a multifunctional and high performance digital oscilloscope, DS6000 delivers a

perfect combination of easy-to-use and various function features as well as

outstanding specifications to help users to fulfill their tasks more quickly.

Main features:

1 GHz or 600 MHz bandwidth.

2-channel or 4-channel model.

5 GSa/s maximum real-time sample rate, 100 GSa/s maximum equivalent sample

rate, 180, 000 wfms/s (dots display) maximum waveform refresh rate.

140 Mpts maximum memory depth (standard).

Ultra Vision technology.

10.1 inches, WVGA (800*480) 160,000 color TFT LCD, with ultra-wide screen,

vivid picture, low power consumption and long service life.

Enable to identify probe type automatically.

Adjustable brightness of analog channel waveform.

Auto setting of waveform display (Auto).

Various trigger functions including multiple protocol triggers.

Standard parallel decoding and multiple serial decodings (options).

Auto measurements of 22 waveform parameters and measurement functions

with statistic.

Real-time waveform recording, record open (constant on), playback and analysis

functions.

Precise delayed sweep function.

Built-in FFT function.

Pass/fail test function.

Multiple waveform math operation functions.

Standard configuration interfaces: USB Device, dual USB Host, LAN and GPIB

(optional).

Support USB storage device storage and PictBridge printer.

Conform to LXI-C instrument standards. Enable quick, economic and efficient

creation and reconfiguration of test system.

Support remote command control.

Embedded help to facilitate information access.

Support multiple languages and Chinese/English input.

Provide shortcut keys for measurement, storage and print.

Provide more than 2-hour lithium battery power supply (optional) to facilitate

on-field test and use.

Built-in 1 GBytes flash memory.

RIGOL

DS6000 Service Guide

Contents

Guaranty and Declaration .............................................................................I

Safety Requirement..................................................................................... II

General Safety Summary............................................................................II

Safety Terms and Symbols......................................................................... IV

DS6000 Series Overview.............................................................................. V

Chapter 1 Disassemble and Assemble....................................................1-1

Disassemble and Assemble Notices............................................................1-1

Outside View Drawing of the Instrument....................................................1-2

Disassemble the Rear Cover......................................................................1-3

Disassemble the Rear Metal Cover.............................................................1-4

Disassemble the Fan&Power Socket...........................................................1-5

Disassemble the Power Supply&Interface Board..........................................1-6

Disassemble the Front Panel.....................................................................1-8

Disassemble the LCD&Patch Board ..........................................................1-10

Disassemble the Buttons ........................................................................1-12

Disassemble the Main Board...................................................................1-13

Assemble Procedures .............................................................................1-14

Chapter 2 Troubleshooting&Maintenance..............................................2-1

Troubleshooting.......................................................................................2-1

Maintenance............................................................................................2-3

System Maintenance..........................................................................2-3

Warranty..........................................................................................2-3

General Care and Cleaning.................................................................2-4

Chapter 1 Disassemble and Assemble RIGOL

DS6000 Service Guide

1-1

Chapter 1 Disassemble and Assemble

Disassemble and Assemble Notices

Notices:

Do not disassemble the instrument unless for working requirement.

Only authorized personnel can disassemble the instrument.

Cut off the power supply before disassembling the instrument.

Please wear anti-static wrist strap or make other anti-static precaution when

disassembling the instrument.

Please use proper tools and follow the correct steps.

Take care not to deform the metal structure and be scuffed when disassembling

the metal structures.

Tools Required:

Phillips screw driver T10

BNC socket

5mm hexagonal socket

WARNING

Make sure that the power supply is cut off before disassembling the

instrument. Only personnel with relative training or relative qualification

certification can disassemble the instrument.

RIGOL Chapter 1 Disassemble and Assemble

1-2

DS6000 Service Guide

Outside View Drawing of the Instrument

The figure below is the outside view drawing of DS6000 (four-channel). You need to

get a basic understanding of the main parts of the instrument before disassembling

and assembling the instrument. When disassembling or assembling the instrument,

take care not to scratch the surfaces of the parts.

The recommended disassemble procedures are as follows.

Disassemble the Rear Cover →Disassemble the Rear Metal Cover →

Disassemble the Fan&Power Socket →Disassemble the Power

Supply&Interface Board →Disassemble the Front Panel →Disassemble

the LCD&Patch Board →Disassemble the Buttons →Disassemble the

Main Board

Figure 1-1 DS6000 Outside View Drawing

Altri manuali per DS6000 Series

Indice

Altri manuali Rigol Apparecchiature di prova

Rigol

Rigol RP5600A Manuale utente

Rigol

Rigol MSO2000A Series Manuale utente

Rigol

Rigol DL3000 Series Manuale utente

Rigol

Rigol MSO2000A Series Manuale utente

Rigol

Rigol MSO4000 Series Manuale utente

Rigol

Rigol DS1000E series Manuale di installazione e funzionamento

Rigol

Rigol MSO8064 Manuale utente

Rigol

Rigol DS6000 Series Manuale utente

Rigol

Rigol RP1018H Manuale utente

Rigol

Rigol DG800 Pro Series Istruzioni operative

Rigol

Rigol DG4000 Series Manuale utente

Rigol

Rigol MS05000-4CH Manuale utente

Rigol

Rigol DS1000Z-E Series Manuale utente

Rigol

Rigol DS2000 Series Manuale utente

Rigol

Rigol MSO2000A Series Istruzioni operative

Rigol

Rigol DHO1000 Series Manuale utente

Rigol

Rigol DS6000 Series Manuale utente

Rigol

Rigol DS1000C Manuale utente

Rigol

Rigol MSO1000Z series Istruzioni operative

Rigol

Rigol DS2000 Series Guida rapida

Rigol

Rigol DS1000CA series Manuale utente

Rigol

Rigol DS1074B Manuale utente

Rigol

Rigol DS1000Z Series Manuale utente

Rigol

Rigol DS1074B Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente