Rigol VS5000 Series Manuale utente

User’s Guide RIGOL

Publication Number UGA05109-1110

Oct. 2008

VS5000 Series Digital Oscilloscope

RIGOL

User’s Guide for VS5000 Series

zRIGOL products are protected by patent laws in and outside of the P.R. China.

zInformation in this publication replaces all previous corresponding material.

zRIGOL reserves the right to modify or change part of or all the specif ications and

pricing policies at company’s sole decision.

NOTE: RIGOL is registered trademark of RIGOL TECHNOLOGIES, INC.

User’s Guide for VS5000 Series

System Requirement

To operate the VS5000 software, the needs of computer configuration are as follows:

Hardware Configuration:

zUpwards of 1G processor

z200M hardware space

z800x600 display resolution

z256RAM

zUSB

Operating System:

Microsoft Windows 2000、2003、XP.

Recommended Configuration:

zWindows XP System

z1024*768 or 1280*1024 resolution

zDPI setting: Normal Size (96DPI)

zNon- Unicode program language: English.

RIGOL

User’s Guide for VS5000 Series

III

Safety Notices

Review the following safety precautions carefully before operate the instrument to

avoid any personal injuries or damages to the instrument and any products

connected to it.

To avoid potential hazards use the instrument as specified by this user’s guide only.

The instrument should be serviced by qualified personnel only.

To Avoid Fire or Personal Injury.

Use Proper Power Cord. Use the power cord designed for the instrument and

authorized in your country only.

Ground The Instrument. The oscilloscope is grounded through the grounding

conductor of the power cord. To avoid electric shock the instrument grounding

conductor(s) must be grounded properly, before making connections to the input or

output terminals of the instrument.

Connect The Probe. The probes’ ground terminals are at the same voltage level of

the instrument ground. Do not connect the ground terminals to a high voltage.

Observe All Terminal Ratings. To avoid fire or shock hazard, observe all ratings

and marks on the instrument. Follow the user’s guide for further ratings information

before making connections to the instrument.

Do Not Operate Without Covers. Do not operate the instrument with covers or

panels removed.

Use Proper Fuse. Use the fuse of the type, voltage and current ratings as specified

for the instrument.

Avoid Circuit or Wire Exposure. Do not touch exposed connections and

components when power is on.

Do Not Operate With Suspected Failures. If suspected damage occurs with the

instrument, have it inspected by qualified service personnel before further

operations.

Provide Proper Ventilation. Refer to the installation instructions for proper

ventilation of the instrument.

Do not operate in Wet/Damp Conditions.

User’s Guide for VS5000 Series

Do not operate in an Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

The disturbance test of all the models meet the limit values of A in the

standard of EN 61326: 1997+A1+A2+A3, but can’t meet the limit values

of B.

RIGOL

User’s Guide for VS5000 Series

Measurement Category

The VS5000 series Digital Oscilloscope is intended to be used for measurements in

Measurement Category I.

Measurement Category Definitions

Measurement Category I is for measurements performed on circuits not directly

connected to MAINS. Examples are measurements on circuits not derived from MAINS,

and specially protected (internal) MAINS derived circuits. In the latter case, transient

stresses are variable; for that reason, the transient withstand capability of the equipment

is made known to the user.

WARNING

IEC Measurement Category I. The HI and LO input terminals may be connected to

circuit terminal in IEC Category I installations for voltages up to 300 VAC. To avoid

the danger of electric shock, do not connect the inputs to circuit’s voltages above 300

VAC.

Transient overvoltage is also present on circuits that are isolated from mains. The

VS5000 series Digital Oscilloscopes is designed to safely withstand occasional

transient overvoltage up to 500 Vpk. Do not use this equipment to measure circuits

where transient overvoltage could exceed this level.

User’s Guide for VS5000 Series

Safety Terms and Symbols

Terms in this manual. These terms may appear in this guide:

WARNING: Warning statements identify conditions or practices that could

result in injury or loss of life.

CAUTION: Caution statements identify conditions or practices that could

result in damage to this product or other property.

Terms on the Product: These terms may appear on the product:

DANGER indicates an injury hazard may be immediately accessible.

WARNING indicates an injury hazard may be not immediately accessible.

CAUTION indicates that a potential damage to the instrument or other property

might occur.

Symbols on the Product: These symbols may appear on the Instrument:

Hazardous

Voltage Refer to

Instructions Protective

Earth

Terminal

Test

Grounding

Terminal

Grounding

Terminal

of Chassis

RIGOL

User’s Guide for VS5000 Series

VS5000 Oscilloscopes at a Glance

RIGOL VS5000 Series Digital Oscilloscopes offer good waveform view and

measurements in a compact, lightweight package. VS5000 series are ideal for

production test, field service, research and design and all of the applications

involving analog circuits test and troubleshooting, as well as education and training.

Product features:

zDual Channel, Bandwidth:

200MHz (VS5202, VS5202D)

100MHz (VS5102, VS5102D)

60MHz (VS5062, VS5062D)

40MHz (VS5042, VS5042D)

25MHz (VS5022, VS5022D)

z400 MSa/s maximum real-time sample rate and 25 GSa/s maximum equivalent

sample rate

zA true Mixed Signal Oscilloscope with 16 channels Logic Analyzer (for some

models)

zMemory depth: 1M points (Single Channel), 512k points (Dual Channels), 512k

points (Logic Analyzer)

zAdjustable waveform intensity, more effective waveform view

zOne-touch automatic setup for ease of use (AUTO)

z20 Automatic measurements

zAutomatic cursor tracking measurements

zWaveform recorder, record and replay dynamic waveforms

zUser selectable fast offset calibration

zBuilt-in FFT function, Frequency Counter

zDigital filters, includes LPF, HPF, BPF, BRF

zAdd, Subtract and Multiply Mathematic Functions

zAdvanced trigger types include: Edge, Video, Pulse width, Slope, Alternative,

Pattern and Duration

zAdjustable trigger sensitivity

User’s Guide for VS5000 Series

III

Construction of This Document

zChpter1 Quick Start

To introduce the panls and menus to help user to realize the base operations.

zChapter 2 Operating Your Oscilloscope

More details to help users to understand the functions and measurements of

instrument deeply.

zChapter 3 Application Examples

To show the measurement functions directly by application examples.

zChapter 4 Troubleshooting

Provide you general troubleshooting to solve the problems during operating.

zChpter 5 Specifications

List common specifications and characteristics of VS5000 series oscilloscope.

zChapter 6 Appendix

Information about accessories, warranties, services and supports and the like.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Rigol Apparecchiature di prova

Rigol

Rigol DS4000E Series Manuale utente

Rigol

Rigol DS1000C Manuale utente

Rigol

Rigol DS2000E Series Manuale utente

Rigol

Rigol DS8000-R Series Manuale utente

Rigol

Rigol DS1000Z-E Series Manuale utente

Rigol

Rigol DS4000 Series Manuale utente

Rigol

Rigol DS7000 Series Manuale utente

Rigol

Rigol MSQ7054 Manuale utente

Rigol

Rigol DS1074B Manuale utente

Rigol

Rigol HDO4000 Series Manuale utente

Rigol

Rigol DSO-5200A Manuale utente

Rigol

Rigol DL3000 Series Manuale utente

Rigol

Rigol DS4024E Manuale utente

Rigol

Rigol MSO5152-E Manuale utente

Rigol

Rigol MS05000-4CH Manuale utente

Rigol

Rigol DS1000CA series Manuale utente

Rigol

Rigol MSO5000 Series Manuale utente

Rigol

Rigol DS1102E Manuale utente

Rigol

Rigol MSO4000 Series Manuale utente

Rigol

Rigol DS1000Z Series Guida rapida

Rigol

Rigol DG2052 Manuale utente

Rigol

Rigol DS1000 Series Istruzioni operative

Rigol

Rigol DS1104Z-S Plus Manuale utente

Rigol

Rigol DS4000 Series Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente