Rittal CMC-TC Manuale utente

CMC-TC Master

DK 7320.000

Installation and Operating Instructions

- Last update: 10 January 2006 -

All rights related to this technical documentation are reserved for us. Without our previous consent it must neither be reproduced nor made

available for third parties. Nor must it be put to any other misuse by the receiver or third parties. Any violation of the above obliges the

violating party to pay compensation and may lead to penal action.

R i t t a l GmbH & Co.

Auf dem Stützelberg

D – 3 5 7 4 5 H e r b o r n

Germany

Email: [email protected]

http://www.cmc-tc.com

Service Tel. : (+49) - (0)2772 / 505 - 0

Service Fax : (+49) - (0)2772 / 505 - 2319

FRIEDHELM L O H GROUP

A29669 11 IT 74

Index [xx]

TCP/IP, SNMP

Table of Content

0. Introduction ........................................................................................................... 4

1. Safety instructions ............................................................................................ 5

2. Service and Service Address...................................................................... 6

3. CMC-TC Master.................................................................................................... 7

3.1

Description ...................................................................................................................7

3.2

Design .............................................................................................................................8

3.3

Functions.......................................................................................................................9

Optional: ................................................................................................................................ 9

4. Assembly............................................................................................................... 10

4.1

Mechanical components......................................................................................10

4.2

Electrical components ..........................................................................................10

5. Start-up................................................................................................................... 11

6. Operation............................................................................................................... 11

7. Fault messages ................................................................................................. 12

8. Maintenance ........................................................................................................ 12

9. Cleaning ................................................................................................................. 12

10. Disposal .............................................................................................................. 12

A 1 Scope of supply/ Accessories – CMC-TC Master...................... 13

B 1 Technical data – CMC-TC Master ........................................................ 14

C 1

Functional diagram - Central application in the network

.................... 15

C 2

Functional diagram – Local operation via console

................................ 16

C 3

Functional diagram – Operation by network and console

................... 17

D 1 Installation instructions – Master........................................................ 18

E 1 Electrical connection: CMC-TC master............................................ 19

E 2 Configuration via serial interface RS 232....................................... 21

E 3 Setting up of the CMC-TC Processing Units

for operation with the Master................................................................. 22

F 1 Check list – Commencing operation of CMC-TC Master....... 24

G 1 Display and operating elements enclosure................................... 25

H 1 Display and operation by terminal program ................................. 26

I 1 Operation of CMC-TC master by browser ......................................... 28



Explanation info window............................................................................................28



Explanation info window – Certification information...................................29



Logging in to the CMC-TC Master .........................................................................30



Structure of the HTML pages ...................................................................................31



Tab – Trap..........................................................................................................................32

Trap list of CMC-TC Master ................................................................................................................. 32

Setting severity of a trap message ..................................................................................................... 33



Tab – Overview................................................................................................................34



Tab – Status......................................................................................................................35



Tab – Setup .......................................................................................................................36

Setup page of the selected CMC-TC sensor unit and its CMC-TC PU ............................................ 36

Changing access codes of the selected PU online........................................................................... 37



Tab – Setup .......................................................................................................................38

Changing access codes of the selected PU online........................................................................... 38



Tab – Setup .......................................................................................................................39

Changing access codes of the selected PU online (initial startup) ................................................ 39



Tab – Setup .......................................................................................................................40

Changing access codes of the selected PU online........................................................................... 40

Changing access codes of the selected PU online........................................................................... 41



Tab – Setup .......................................................................................................................42

Changing access codes of the selected PU offline (initial startup) ................................................ 42



Tab – Setup .......................................................................................................................43

Changing access codes of the selected PU offline (initial startup) ................................................ 43



Tab – Setup .......................................................................................................................44

Changing access codes of the selected PU offline (initial startup) ................................................ 44



Tab – Setup .......................................................................................................................45

Changing access codes of the selected PU offline .......................................................................... 45



Tab – Images ....................................................................................................................46

Displaying the Webcam photos stored in the master....................................................................... 46

Download or delete the Webcam photos saved in the master ........................................................ 47



Tab – Alarms ....................................................................................................................48



Tab – Admin......................................................................................................................50

General: Overview of administration page ........................................................................................ 50

General setup........................................................................................................................................ 51

User management................................................................................................................................. 52

Alarm notification receiver .................................................................................................................. 54

Remote shutdown settings.................................................................................................................. 55

General information on the shutdown of computers........................................................................ 56

Alarm actions ........................................................................................................................................ 57

Webcam settings .................................................................................................................................. 59

Logfile management............................................................................................................................. 60

Overview page setup............................................................................................................................ 60

Update connected device .................................................................................................................... 61

Firmware update ................................................................................................................................... 62

J 1 Software functions ....................................................................................... 63

K 1 Fault messages Master Unit ................................................................... 64

0. Introduction

The stable flow of information and production is the 'lifeline' of an enterprise.

Loss of data, failure of function and production cause extensive and in many cases life-

threatening damage. Therefore, it is the declared company objective to ensure a maximum of

safety and reliability.

RITTAL offers the support to achieve this: By means of universal competence in effective

prevention, comprehensive safety, and centralized organization, i.e. teamwork for IT safety

and reliability! This results are the optimum combination of enclosure monitoring, server

administration, and climate control components.

The solution for enclosure monitoring carries the Name RITTAL CMC-TC. This concept

includes complete physical monitoring of the enclosure, i.e. temperature, humidity, vibration,

smoke, voltage up to complete enclosure locking and access control. All these items of

information are transmitted via SNMP to a management station and can easily be

administered from this point.

The system is rounded off by its modular structure. Basic monitoring can be implemented in

next to no time. When the requirements grow, the system can easily be expanded and can

also be combined with other components of the Rittal production range.

For more comprehensive systems the CMC-TC Master is ready, acting as a central

management station. It can manage up to 10 self-contained monitoring systems via one IP

address in a network. Alarm signals and monitoring-relevant data of the monitoring systems

are centrally collected and partly documented. The data collected and prepared can then be

called over the 10/100 BaseT connection or directly over a KVM console (Keyboard-Video-

Mouse console). The RITTAL SSC console is suited to this purpose. In addition, the Master

can be connected to a KVM switch.

The significant features of the RITTAL CMC-TC Master are:

• Central administration of larger enclosure monitoring systems in interlocked networks or

stand-alone

• Ethernet network connection 10/100BaseT

• Central web server for configuration

• Local administration via KVM console (2xPS/2 and VGA connection)

• Maximum expansion:

Up to 160 temperatures can be measured or

up to 80 doors can be administered

• Total compatibility with RITTAL enclosure monitoring system CMC-TC and with the

RITTAL enclosure system

• (Room) Monitoring by WebCam

1. Safety instructions

Rittal

CMC-TC

General remarks

The installation and operating instructions contain basic information for installation,

for putting into operation, and for operating the RITTAL CMC-

TC Master. It is a

must to make the instructions available to the installation technician and the

administrative operating personnel and that they should read these carefully.

RITTAL cannot accept liability for personal injury and material damage resu

lting

from non-

observance of the safety advice in the installation and operating

instructions.

It is essential to observe not only the general safety advice given

in this chapter, but also the special safety advice given in the other chapters.

Personnel qualification and authorization

Operation and any changes may be c

arried out only by authorized specialist

personnel or by authorized trained operating personnel.

Risks due to non

observance of safety advice

Non-observance of the safety advice may result in risks for the personnel,

as well

as to the RITTAL CMC-TC Master together with the connected equipment. Non-

observance of the safety advice involves loss of the right to claim for all and any

damages.

IPxx



min

max

Working at the CMC

The generally applicable electrical regulations of the country i

n which the unit is

installed and operated must be observed, just as the existing national regulations

for the prevention of accidents and any internal rules (work, operating, safety

regulations) issued by the operator. Prior to working at the unit this mu

st be

disconnected from the supply and secured against being switched on again.

Original accessories and accessories authorized by the manufacturer ensure

safety. The use of other parts may make void the liability for consequences

resulting from this. Repa

ir work at the unit may be done only by RITTAL or by

authorized personnel.

Operating reliabilit

The operating reliability of the unit supplied is only warranted in case of use as

intended and according to the rules. The limit values quoted in the technical data

(see Appendix B Technical data

) must not be exceeded under any

circumstances. This appli

es particularly to the allowed ambient temperature range

and the allowed IP protection category. For applications with a higher specified IP

protection category the Rittal CMC-

TC must be installed in an enclosure of a

higher IP protection category, complyi

ng with the specified protection category.

Operation of the CMC-

TC system in direct contact with water, aggressive media,

or inflammable gases and fumes is prohibited.



2. Service and Service Address

If you have any questions concerning technical or other issues related to our product range

RITTAL will of course support you. You may contact us by e-mail or via the address or phone

and fax numbers indicated below.

RITTAL GmbH & Co. KG

PM IT-Service

Auf dem Stützelberg

D-35745 Herborn

Germany

http://www.RITTAL.de

Email: Info@RITTAL.de Caution: please always specify the article number in

the reference line!

Phone: +49 (0)2772/505-0

Fax: +49 (0)2772/505-2319

Further information and the updated operating instructions for the RITTAL CMC-TC Master

are ready for downloading from the RITTAL homepage.

3. CMC-TC Master

3.1 Description

The RITTAL CMC-TC Master is a function block making the administration, co-ordination,

documentation, and alarm indication of the monitoring system CMC-TC more comfortable

and supporting additional functions. The configuration is consisting of an Embedded Linux

PC with integrated 10-fold hub in the 1 U 482.6 mm (19”) enclosure, to which up to 10

processing units can be connected. An integrated 10/100 BaseT interface (Ethernet

interface) allows the Master to integrate the connection into the network environment of the

company. The Master can be operated off the network using the console connections

(2xPS/2, 1xVGA). This means the Master can be accessed locally or via the network.

A visible or audible alarm can be implemented using the integrated alarm relay.

The CMC-TC Processing Units are linked up by Cat5 cabling with the CMC-TC Master

installation. The data connection into the network is made via the Embedded-Linux PC. To

guarantee the connection to the network is secure, 128-bit SSL encryption is integrated.

Access to the integrated web browser of the Master is possible through a standard browser

(Internet Explorer, Mozilla Firefox, etc.). The CMC-TC Master supports the TCP/IP, SNMP,

TELNET (TeraTerm), SSH and HTTPS protocols.

The network protocols are used for communication (password and status query, switching

commands, and alarm signals) between the CMC-TC system and the authorized users in the

network (network, internet and intranet).

See Appendix C Functional diagram

The Rittal CMC-TC Master is platform-independent as long as the platform has a network

connection and a web browser available. The SNMP functionality is also platform-

independent and must support the SNMP V1.0 network management protocol. In addition,

the CMC-TC Master supports the Standard-MIB II. The private MIB is part of the scope of

supply; see CD Rom (CMC-TC-Master.MIB).

3.2 Design

The Master is delivered in a 482.6 mm (19”) aluminum enclosure. The Master is based on an

embedded Linux PC with integrated 10-fold hub. For future further development of the

Master, several interfaces such as PCMCIA, serial, infrared and sound interfaces are

preconfigured.

At the front the various status conditions like alarm status, network connection, and

connected monitoring systems are shown by 13 LEDs. The functions are described in detail

in Appendix G 1 Display and operating elements enclosure.

The IEC mains connection is located on the rear side of the Master. The power pack is

integrated into the Master enclosure. The IEC connection cable is available in various country

versions and must be chosen according to the country-specific specifications (see Appendix

A1 Scope of supply/Accessories – Master).

A connection point is available to ground the enclosure of the Master.

All important operating parameters (e.g. application limit, temperature and humidity, etc.) are

described in more detail in Appendix B Technical data –Master.

3.3 Functions

The functions of the RITTAL CMC-TC Master are focused on the management of up to 10

Processing Units and of the components connected to these, such as sensors, access

controls, and climate control components. These functions are administered and controlled

by means of the protocols listed below:

• Terminal programs

• through serial interface RS232: e.g. Hyperterminal

• in Ethernet network: e.g. through TELNET (Tera Term), SSH

• SNMP V1.0, compatible with the usual management systems

• HTTPS

• TFTP

Optional:

• WebCam support (USB version) up to 2 units (see Appendix A 1 Scope of supply

accessories – CMC-TC Master)

See Appendix C 1 Functional diagram

See Appendix I 1 Operation of CMC-TC Master by browser

The more detailed description of the software functions is given in Appendix J 1 Software

functions, and also the explanation of the layout of the table structure as follows.

Item:

Call: Telnet,

Hyperterminal

To-Do Software function

Value

range

Factory setting

Hyperterminal

Telnet

Browser

0 Login

0.1

Query

User name

see table below.



0.2

Query

Password

see table below.



1 Network c

onfiguration

1.1.1

Setting

IP Address

192.168.30.100



1.1.2

Setting

IP Subnetmask

255.255.255.0



1.1.3

Setting

IP Router

0.0.0.0



For complete list, see Appendix J 1 Software functions

Function is supported

by …

Position

Call of menu

items in ...

Possible action

Description of software functions

Settable value range

Default

ex works

4. Assembly

The Rittal CMC-TC Master is mounted in the 482.6 mm (19”) level of a 482.6 mm (19”) rack.

Attention must be paid to maintaining the allowed ambient temperature and humidity ranges,

as well as the IP protection category as required for the specific application. The appropriate

information is given in Appendix B Technical data. Compliance with a higher required IP

protection category can be achieved by installation in an enclosure or enclosure system

having the required protection category.

In addition, the following points must be observed:

 When using accessories in connection with the RITTAL CMC-TC, the installation and

operating instructions for the accessories and for the RITTAL CMC-TC must be observed.

 Repair work on the RITTAL CMC-TC may be carried out only by authorized specialist.

 The number of RITTAL CMC-TC Masters in the network is optional, assuming that there

are sufficient free IP addresses available.

 In case of modification at or inside the enclosure, e.g. installation of a new CMC-TC

monitoring component, it is a must to observe the operating instructions of the enclosure.

4.1 Mechanical components

Note: The RITTAL CMC-TC Master can be mounted optionally in the front or the rear

482.6 mm (19") level.

See Appendix D Installation instructions

4.2 Electrical components

Note: During installation the existing national regulations of the country, in which the RITTAL

CMC-TC Master is to be installed and operated, must be observed.

In addition the following points must be observed:

• Existing safety devices must not be put out of action.

• The RITTAL CMC-TC may be operated only with PE conductor connection. The PE

conductor connection is made by plugging in the IEC connection cable. The requirement

for this is that the IEC connection cable is connected on the mains-side with the PE

conductor. The enclosure grounding point must be connected to the potential equalization

of the enclosure system to prevent electric shock due to residual hazardous voltages

following a malfunction.

• The electric supply voltage and frequency must correspond to the rated values given on

the rear side of the device and in Appendix B 1 Technical Data.

Altri manuali per CMC-TC

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Rittal Server

Rittal

Rittal TS 47U Manuale utente

Rittal

Rittal Micro Data Center Level E Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente