Rival 11560 Manuale utente
compact fabric steamer
plancha de vapor
compacta para ropa
Customer
Assistance:
1.866.321.9509
Atención al
Cliente:
1.866.321.9509
TM
11560
840193801 ENv05.qxd:840135000 Ev00.qxd 11/19/10 9:26 AM Page 1
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS!
1. Read all instructions.
2. Close supervision is necessary for any
appliance being used by or near
children. Do not leave appliance
unattended while connected.
3. To reduce the risk of contact with hot
water emitting from steam vents, check
appliance before each use by holding
it away from body and operating
steam button.
4. Use appliance only for its intended use.
5. To reduce the risk of electric shock, do
not immerse the appliance in water or
other liquids.
6. Never yank cord to disconnect from
outlet; instead, grasp plug and pull to
disconnect.
7. Do not allow cord to touch hot surfaces.
Let appliance cool completely before
putting away. Loop cord loosely around
appliance or use cord wrap feature
when storing.
8. Always disconnect appliance from
electrical outlet when filling with water
or emptying, and when not in use.
9. Do not operate appliance with a
damaged cord, or if the appliance has
been dropped or damaged. To reduce
the risk of electric shock, do not dis-
assemble or attempt to repair the
appliance. Take it to a qualified service
person for examination and repair.
Incorrect reassembly or repair could
cause a risk of fire, electric shock, or
injury to persons when the appliance is
used.
10. Burns could occur from touching hot
metal parts, hot water, or steam. Use
care when you turn a steam appliance
upside down—there may be hot
water in the reservoir.
11. To avoid a circuit overload, do not
operate another high-wattage
appliance on the same circuit.
12. If an extension cord is absolutely
necessary, a 15-ampere cord should be
used. Cords rated for less amperage
may overheat. Care should be taken
to arrange the cord so that it cannot
be pulled or tripped over.
13. WARNING! Shock Hazard: This appli-
ance has a polarized plug (one wide
blade) that reduces the risk of electric
shock. The plug fits only one way into
a polarized outlet. Do not defeat the
safety purpose of the plug by modify-
ing the plug in any way or by using an
adapter. If the plug does not fit,
reverse the plug. If it still does not fit,
have an electrician replace the outlet.
This product is intended for household
use only.
Direct steam at clothing only. Directing
steam toward any other surface may
damage that surface.
• Do not steam clothes that are being
worn.
• Do not use steam in the direction of
people or pets.
2
When using your appliance, basic precautions should always be followed, including the
following:
OTHER CONSUMER SAFETY INFORMATION
840193801 ENv05.qxd:840135000 Ev00.qxd 11/19/10 9:26 AM Page 2
3
PARTS AND FEATURES
1. Flexible Steam Hose
2. Steam Nozzle/Handle
3. Brush Attachment
4. Creasing Attachment
5. Hose Base
6. Carrying Handle
7. Steam Hose Attachment Opening
8. ON/OFF Switch
9. Steam Nozzle Storage Hook
10. Power Cord
11. Fill/Drain Hole
12. Fixed Vent Opening
13. Lint Brush
14. Door Hook
2
1
5
67
8
9
10
11 12
13
14
BEFORE FIRST USE: REMOVE ALL PACKING MATERIALS FROM GARMENT STEAMER.
3
4
Snap onto steam
nozzle.
BRUSH
ATTACHMENT
Slide onto steam
nozzle until it locks
into place.
CREASING
ATTACHMENT
840193801 ENv05.qxd:840135000 Ev00.qxd 11/19/10 9:26 AM Page 3
4
ASSEMBLY AND STORAGE INSTRUCTIONS
BEFORE FIRST USE: REMOVE ALL PACKING MATERIALS FROM GARMENT STEAMER.
INSERTING HOSE INTO BASE:
Firmly grasp base of flexible steam hose. Insert
into opening on steamer until it snaps into place.
To remove hose, push in tabs on both sides and
pull hose out.
WARNING! Burn Hazard: Escaping steam is hot.
Ensure base of hose is fully inserted as directed.
If steam is leaking around base of hose, turn off
and allow to cool before attempting to adjust
the base of hose.
Use the Brush Attachment to:
• Steam upholstery, pillows, and
other fabrics
• Freshen clothing and fabrics that
have become “matted” over time
• Assist with lint removal while
steaming
Use the Creasing Attachment to:
• Steam creases into pants, shirt cuffs,
and collars
BRUSH ATTACHMENT
CREASING ATTACHMENT
STORAGE
CORD WRAP
Wrap the flexible steam hose around
the top of the steamer base and slide
nozzle onto storage hook.
Secure the power cord around the
cord wrap on the steamer base.
840193801 ENv05.qxd:840135000 Ev00.qxd 11/19/10 9:26 AM Page 4
5
2
1
HOW TO STEAM
BURN HAZARD.
Steam is hot. Always make sure unit is OFF when assembling attachments.
wWARNING
Fill with cool water UP TO MAX FILL
LINE ONLY using the fill/drain hole.
NEVER use fabric fresheners or other
additives in the steamer.
The float ball will rise to the top of
the tank when it reaches full capacity.
IMPORTANT: Maximum capacity is 1
liter or 34 ounces. DO NOT OVERFILL.
4
3
NOTE: The fixed vent opening in the
cover allows excess steam to escape. Position door hook over top of a
door.
6
5
Elevate spray nozzle by hanging on
door hook. This avoids pooling of
condensation in hose.
NOTE: Always elevate steam nozzle
during heat-up and use.
Plug unit into electrical outlet.
WARNING! Burn Hazard: Always
place steamer on the floor during
use. Hot water can leak from the
steamer if tipped over.
840193801 ENv05.qxd:840135000 Ev00.qxd 11/19/10 9:26 AM Page 5
6
8
7
HOW TO STEAM (CONT.)
Push ON/OFF switch to the ON (I)
position. Wait at least 2 minutes for
steam to start flowing from the steam
nozzle.
Remove spray nozzle from door hook
and replace with garment on a
hanger.
10
9
Begin steaming at top of garment.
Slowly move steam nozzle vertically
up and down to cover entire garment.
WARNING! Burn Hazard: Steam is
hot. Always point nozzle away from
yourself and others. Never steam
clothes while they are being worn.
When finished, push ON/OFF switch
to the OFF (O) position and unplug
unit.
BEFORE EMPTYING OR STORING
UNIT: Let cool completely. Water and
steam are hot. Do not empty or store
while unit is hot.
12
11
Once unit has completely cooled,
empty remaining water from tank
over sink using the fill/drain hole.
Tilt unit back 90°; then empty again,
repeating process until all water is
removed from tank.
Store cord using cord wrap.
840193801 ENv05.qxd:840135000 Ev00.qxd 11/19/10 9:26 AM Page 6
7
COMPACT GARMENT STEAMER TIPS
NOTICE: To avoid garment damage, check garment label for fabric composition and any
steaming instructions such as this symbol:
• Do not operate without water in the water tank. To add water during operation, first
switch steamer OFF (O) and then use a pitcher to refill.
• To prevent spotting, make sure hose is straight during use (no loops).
• The door garment hanger is not intended for hanging multiple garments at one time
or for garment storage.
• When steaming, touching fabrics lightly with the steam nozzle/handle will assist in
wrinkle removal. It is important to make contact with the garment and/or fabric.
• Always place steamer on floor, and hang garments with garment hanger hooked
onto a door. This also helps ensure hose extends fully.
• For more difficult wrinkles, try steaming from the underside of the fabric. This allows
the fibers in the material to relax.
• Pants are more easily steamed upside down, with pants hanging from cuffs.
• Your garment steamer is also ideal for steaming curtains, upholstery, and other fabric
items that are difficult or unable to be ironed.
Do not use steam
840193801 ENv05.qxd:840135000 Ev00.qxd 11/19/10 9:26 AM Page 7
8
2
1
CARE AND CLEANING
Follow this procedure monthly to avoid mineral deposits and buildup, which can affect
the steaming performance of the unit.
Make sure unit is unplugged and has
cooled completely. Push in tabs on
both sides and pull to remove hose
from unit.
Empty remaining water from tank
over sink using the fill/drain hole. Tilt
unit back 90°; then empty again,
repeating process until all water is
removed from tank.
4
3
Mix a solution of one cup white
vinegar and one cup water. Slowly pour the solution into the
water tank fill opening. Reattach
hose to base.
1 Cup
(250 ml)
White
Vinegar
1 Cup
(250 ml)
Water
6
5
Turn the unit ON and let the liquid
solution steam out of the steam
handle/nozzle.
Repeat this process with clean water
until vinegar odor is no longer
present.
840193801 ENv05.qxd:840135000 Ev00.qxd 11/19/10 9:26 AM Page 8
9
8
7
CARE AND CLEANING (CONT.)
Wrap cord around the cord wrap on
bottom of steamer. Wrap flexible steam hose around top
of steamer base and slide nozzle
down onto storage hook.
TROUBLESHOOTING
PROBLEM
Unit won’t steam.
Not enough steam.
Flexible steam hose
drips and/or leaks.
Steamer leaves water
spots on clothing.
Flexible steam hose
emits a gurgling
noise.
PROBABLE CAUSE
• Make sure there is water in the water tank and
unit is plugged in and switched to ON (I)
position.
• Water deposits have built up in unit. See “Care
and Cleaning” section.
• Do not hold the steam handle/nozzle too low for
more than 20 seconds, or steam will condense
into water inside the hose and may block nor-
mal steam flow. Periodically lift steam nozzle/
handle as high as possible to let any condensa-
tion in flexible steam hose drain back into unit.
• Do not allow loops in the flexible steam hose
for more than 20 seconds.
• Allow enough time (approximately 2 minutes)
for steamer to preheat before use.
• Periodically lift steam nozzle/handle as high as
possible to let any condensation in flexible
steam hose drain back into unit.
• Normal during use. To maintain steam flow,
fully extend flexible steam hose to allow steam
to flow freely.
840193801 ENv05.qxd:840135000 Ev00.qxd 11/19/10 9:26 AM Page 9
10
ONE YEAR LIMITED WARRANTY
This product carries a warranty that it will be free from defects in material and
workmanship for a period of one year from the date of purchase. This warranty is
valid for the original retail purchaser from the date of initial retail purchase and is
not transferable. Keep your original sales receipt.
IMPORTANT: This warranty does not cover damages resulting from accident, misuse
or abuse, lack of reasonable care, the affixing of any attachments not provided with
the product, loss of parts, or subjecting the appliance to any but the specified
voltage. (Read directions carefully.)
If service is required during the warranty period, properly pack your unit. We
recommend using the original carton and packing materials. Return the product to
your nearest Wal*Mart store with the sales receipt. A replacement or refund may
be offered at the discretion of Wal*Mart. If additional assistance is needed, please
contact customer assistance at: 1-866-321-9509.
Wal*Mart expressly disclaims all responsibility for consequential damages or
incidental losses caused by use of the appliance. Some states do not allow this
exclusion or limitation of incidental or consequential losses so the foregoing
disclaimer may not apply to you. This warranty gives you specific legal rights, and
you may also have other rights which may vary from state to state.
SAVE THIS FOR YOUR RECORDS
RIVAL™ logo is a registered trademark of Sunbeam Products, Inc. used under license
by Wal-Mart Stores, Inc., Bentonville, AR 72716.
Made in China
840193801 ENv05.qxd:840135000 Ev00.qxd 11/19/10 9:26 AM Page 10
Indice
Lingue:
Altri manuali Rival Ferro
