Rohde & Schwarz R&S VENICE 2U Istruzioni per l'installazione

VENICE 2U Hardware Guide (Version 1.2)

Ingest and Production Server

R&S®VENICE 2U

Hardware Guide

VENICE 2U | Hardware Guide | Version 1.2

Rohde & Schwarz DVS GmbH

VENICE 2U | Hardware Guide | Version 1.2

Rohde & Schwarz DVS GmbH

Hardware Guide Version 1.2 for VENICE 2U Hardware Version 1.2

The manuals as well as the soft- and/or hardware described here and all their con-

stituent parts are protected by copyright. Without the express permission of

Rohde & Schwarz DVS GmbH any form of use which goes beyond the narrow

bounds prescribed by copyright legislation is prohibited and liable to prosecution.

This particularly applies to duplication, copying, translation, processing, evalua-

tion, publishing, and storing and/or processing in an electronic system.

Specifications and data may change without notice. We offer no guarantee that

this documentation is correct and/or complete. In no event shall Rohde & Schwarz

DVS GmbH be liable for any damages whatsoever (including without limitation any

special, indirect or consequential damages, and damages resulting from loss of

use, data or profits, or business interruption) arising out of the use of or inability to

use the hardware, software and/or manual materials.

Those parts of this documentation that describe optional software or hardware fea-

tures usually contain a corresponding note. Anyway, a lack of this note does not

mean any commitment from Rohde & Schwarz DVS GmbH.

DVS is a registered trademark of Rohde & Schwarz DVS GmbH. Linux is a regis-

tered trademark of Linus Torvalds. LSI is a trademark or registered trademark of

LSI Corporation.

Any other product names mentioned in this documentation may be trademarks or

registered trademarks of their respective owners and as such are subject to the

usual statutory provisions.

In this document R&S®VENICE 2U is abbreviated as VENICE 2U.

VENICE 2U | Hardware Guide | Version 1.2

Rohde & Schwarz DVS GmbH

Headquarter:

Support:

Rohde & Schwarz DVS GmbH

Krepenstr. 8

30165 Hannover

GERMANY

Phone: +49-511-67807-0

Fax: +49-511-630070

E-mail: info.dvs@rohde-schwarz.com

Internet: http://www.dvs.de

Phone: +49-511-67807-125

Fax: +49-511-371985

E-mail: [email protected]

iVENICE 2U | Hardware Guide | Version 1.2

Rohde & Schwarz DVS GmbH

Contents

1Introduction ...............................................................................1-1

1.1 Target Group ...........................................................................1-1

1.2 Conventions Used in this User Guide .....................................1-1

1.3 Safety Instructions ..................................................................1-4

1.4 Important Notes ......................................................................1-6

2Overview ......................................................................................2-1

2.1 R&S®VENICE 2U Models .........................................................2-2

2.2 Overview of the Front..............................................................2-6

2.2.1 The Front of the System .................................................2-6

2.2.2 Operation Items .............................................................2-8

2.2.3 Hard Disk Array .............................................................2-9

2.2.4 Fan Area .....................................................................2-11

2.3 Overview of the Rear .............................................................2-13

2.3.1 The Rear of the System ................................................2-13

2.3.2 Digital Video I/Os .........................................................2-14

2.3.3 Main Connector Panel ..................................................2-16

2.3.4 Power Supply ..............................................................2-19

2.3.5 ATX Connector Panel....................................................2-20

2.3.6 Slot Panel Connectors ..................................................2-22

2.4 Battery Backup Unit ..............................................................2-24

2.5 SNMP – Simple Network Management Protocol..................2-25

3Installation ..................................................................................3-1

3.1 System Setup ..........................................................................3-2

3.2 Note about the Network Installation .......................................3-3

4Operation .....................................................................................4-1

4.1 Starting the System.................................................................4-2

4.2 Shutting Down the System .....................................................4-2

Contents

ii VENICE 2U | Hardware Guide | Version 1.2

Rohde & Schwarz DVS GmbH

5Maintenance ..............................................................................5-1

5.1 Hard Disk Maintenance ...........................................................5-2

5.1.1 Introduction to RAID ......................................................5-2

5.1.2 Identifying a Broken Hard Disk ........................................5-3

5.1.3 Replacing a Hard Disk ....................................................5-4

5.2 Fan Maintenance .....................................................................5-8

5.3 Power Supply Maintenance...................................................5-10

5.4 Opening and Closing the Casing ...........................................5-12

5.4.1 Opening the Casing......................................................5-12

5.4.2 Closing the Casing .......................................................5-13

5.5 Removal of the Faceplate ......................................................5-14

5.6 Backup or Recovery of the System Disk ...............................5-15

5.6.1 Creating a Backup Image of the System Disk .................5-15

5.6.2 Restoring the System Disk ............................................5-17

AAppendix ..................................................................................... A-1

A.1 Troubleshooting ...................................................................... A-2

A.2 Technical Data ........................................................................ A-4

A.2.1 General Technical Data .................................................. A-4

A.2.2 Dimensions .................................................................. A-5

A.3 Video Rasters.......................................................................... A-6

A.4 Signal In- and Outputs............................................................ A-7

A.5 Packing Instructions ............................................................. A-10

A.6 Conformity Declarations ....................................................... A-12

A.6.1 RoHS Compliance ....................................................... A-12

A.6.2 EC Declaration of Conformity (CE Marking) ................... A-12

A.6.3 FCC Compliance Statement ......................................... A-13

A.6.4 Korea Certification ....................................................... A-14

IIndex ...............................................................................................I-1

1-1VENICE 2U | Hardware Guide | Version 1.2

Rohde & Schwarz DVS GmbH

Introduction

1.1 Target Group

To use this manual you should have experience in handling video and

computer equipment. Additionally, to use the R&S DVS system in con-

nection with other equipment, e.g. a camera or a VTR, you should

know how to handle this equipment.

When performing maintenance tasks on the hardware of the R&S DVS

system, you must be qualified to work on, repair and test electrical

equipment.

1.2 Conventions Used in this User Guide

The following typographical conventions will be used in this documen-

tation:

1. Texts preceded by this symbol describe activities that you must

perform in the order indicated.

Texts preceded by this symbol are parts of a list.

Texts preceded by this symbol are parts of a list of a second

level.

Texts preceded by this symbol are parts of a requirements list.

Texts preceded by this symbol describe the result of an action.

Texts preceded by this symbol are general notes intended to facilitate

work and help avoid errors.

Cause of Risk

Indicates the possibility of incorrect operation which can result in

damage to the product. You must pay particular attention to text

that follows this symbol to avoid errors.

Preventive measures to avoid risks of damage to the sys-

tem.

Introduction

Conventions Used in this User Guide

1-2 VENICE 2U | Hardware Guide | Version 1.2

Rohde & Schwarz DVS GmbH

Source of Danger

Indicates a hazardous situation which, if not avoided, could

result in minor or moderate injury.

Preventive measures to avoid minor or moderate in-

jury.

Source of Danger

Indicates a hazardous situation which, if not avoided, can

result in death or serious injury.

Preventive measures to avoid death or serious inju-

ry.

Source of Danger

Indicates a hazardous situation which, if not avoided, will

result in death or serious injury.

Preventive measures to avoid death or serious injury.

“ ” Texts enclosed by quotation marks are references to other manuals, guides,

chapters, or sections.

’ ’ Texts enclosed by single quotation marks are references to labelings given

by the author and quoted labelings.

’Window’ Text in bold with single quotation marks indi-

cates a window name

BUTTON Text in small caps and bold indicates a push but-

ton

Group/Menu Text in italic and bold indicates either a group

name, menu name or options in a menu list

Menu > Option In the specified group or menu select the stated

item.

Item Text in bold only stands for other labeled items

of a user interface

Directory/File Directory structure or file

Entry Indicates parameters or variables, as well as se-

lections or entries made in a program; it may

also indicate a command (e.g. at a command

line), a syntax or contents of a file/output

[Key] An individual key or a key combination on a key-

board

1-3VENICE 2U | Hardware Guide | Version 1.2

Rohde & Schwarz DVS GmbH

Introduction

Conventions Used in this User Guide

Keyboard Shortcuts

To perform options or procedures with the keyboard often requires a si-

multaneous pressing of two keys.

Example:

Screenshots

The screenshots shown in this documentation may be taken on various

operating systems as well as from pre-release versions of the software.

Their appearance may differ from your environment. However, they

should contain all relevant elements that you need to understand the

described actions.

[Ctrl + F1] If this is given, hold down the [Ctrl] key and

press simultaneously the [F1] key.

[Alt, F1] If this is given, press the [Alt] key first and then

the key [F1] successively.

Introduction

Safety Instructions

1-4 VENICE 2U | Hardware Guide | Version 1.2

Rohde & Schwarz DVS GmbH

1.3 Safety Instructions

To use R&S®VENICE 2U correctly please heed the following:

General

VENICE 2U has been built according to the applying safety regulations.

To minimize the possibility of a faulty operation of the device all manu-

als and guides must be available at all times at the operation site. Be-

fore installing and/or using the R&S DVS system the manuals and

guides delivered with it must be read and observed.

Use the R&S DVS system only in apparent good technical order.

The hardware of the R&S DVS system works with voltages that can

be hazardous to your health. Never work on the system or access

its interior with the power cable(s) being plugged in. Make sure the

power supply is disconnected from the components you intend to

work on.

Computer hardware contains components that are sensitive to elec-

trostatic discharge. If you touch them without precautionary mea-

sures, they can be destroyed. Use a wrist strap connected to

ground when accessing electronic parts and take care of grounding

the system. Avoid touching the internal components of the R&S

DVS system whenever possible.

Computer hardware contains components that are sensitive to

changing voltages. Connecting or disconnecting the R&S DVS sys-

tem to or from peripheral hardware while any of them is switched

on may damage the hardware. Switch off all peripheral hardware

before connecting or disconnecting anything.

Use, store and transport the R&S DVS system only in compliance

with the technical data laid out in section “Technical Data” on

page A-4.

If fluids or solid objects get inside the casing, the R&S DVS system

must be disconnected from the power supply immediately. Before

using the R&S DVS system again, it has to be checked by autho-

rized service personnel.

Only use a damp tissue without any cleaning agents to clean the

casing.

Disregarding the safety instructions

If the R&S DVS system is not used in compliance with the safety

instructions, the warranty and all resulting liability claims will be

void.

Please read the following safety instructions carefully be-

fore attempting any installation and/or performing any work

on the VENICE 2U hardware.

Indice

Altri manuali Rohde & Schwarz Server

Rohde & Schwarz

Rohde & Schwarz VENICE S Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente