Rolls-Royce Helicon X3 Manuale utente
User Manual
Rolls-Royce Helicon X3
P&T Control System
PRODUCT INFORMATION
Yard:
Alianca
NB/Hull No.:
AL 021
Project No.:
13S000411
Installation Id.:
BOW1 / BOW2
PORT_MP / STBD_MP
Vessel type:
Offshore
Owner:
Asgaard Navegac„o
Date:
03/07/2014
Revision:
A
Copyright © 2010 Rolls-Royce plc
The information in this document is the property of Rolls-Royce plc and may not be cop-
ied or communicated to a third party, or used for any purpose other than that for which it
is supplied without the express written consent of Rolls-Royce Marine plc.
This information is given in good faith based upon the latest information available to
Rolls-Royce plc, no warranty or representation is given concerning such information,
which must not be taken as establishing any contractual or other commitment binding
upon Rolls-Royce plc or any of its subsidiary or associated companies.
1 Introduction
2Safety
3 System Description
4 Delivery Specification
5 Technical Data
6 Operating Instructions
7 Maintenance Instructions
8 Trouble Shooting
9 Contact List
10 Spare Parts
11 Tools
12 Design Drawings
13 Revision
14 Subsuppliers Manuals
Copyright © 2010 Rolls-Royce plc
The content of this document is the property of Rolls-Royce plc and may not be redistributed in whole or in part thereof without
express written consent of Rolls-Royce plc.
1
Doc. No.: 13S000411
Revision: A
Introduction
1 Purpose ........................................................................................................3
2 Warranty ....................................................................................................... 3
3 Contents ....................................................................................................... 3
4 Target Groups .............................................................................................. 4
5 Terms and Abbreviations ........................................................................... 4
Copyright © 2010 Rolls-Royce plc
Doc. No.: 13S000411
Revision: A
Introduction
Page 3 of 6Doc. No.: 13S000411
Revision: A
Copyright © 2010 Rolls-Royce plc
1
1Purpose
The purpose of the Helicon X3 User Manual is to provide the necessary information to
plan and perform a safe and correct operation of the installed delivered system, as well
as under-standing the basic functionality of the equipment. The User Manual covers
both operational and technical aspects of the system.
The personnel involved in using the system must have relevant experience and training
with regards to the use of such systems.
2 Warranty
The product has a limited warranty. Please note that the warranty will be void if the
equipment is misused or not handled in accordance to prescribed standards, for example
dismantling the equipment to a level greater than described.
3 Contents
This manual contains the following chapters:
Chapter Contents
1. Introduction This chapter specifies the purpose and target groups for the
manual. It also contains list of used abbreviations and a
specification of the document conventions.
2. Safety This chapter specifies safety instructions to follow when
operating and maintaining system.
3. System Description This chapter briefly describes the system components, the
system design and the functionality.
4. Delivery Specification This chapter specifies the delivered equipment.
5. Technical Data This chapter contains technical specifications and
performance data.
6. Operating Instructions This chapter describes how to use the Helicon X3 system.
7. Maintenance Instructions This chapter describes how to maintain the Helicon X3
system, including both preventive and corrective actions.
8. Trouble Shooting This chapter describes how to act when a malfunction occur
in the Helicon X3 system.
9. Contact Information This chapter contains contact information for Rolls-Royce
Marine, Dept. Propulsion Ulsteinvik and Rolls-Royce World
Wide Support Organization.
10. Spare Parts This chapter specifies recommended spare parts for the
Helicon X3 system.
11. Tools This chapter describes required and recommended tools for
the maintenance of the system to use during the installation.
12. Design Drawings This chapter consists of design drawings that serve as an
information source about the installed system for the
installation.
13. Revision This chapter contains the revision history for the total binder.
14. Subsuppliers Manuals This chapter contains documentation from other suppliers
than Rolls-Royce, if such has been delivered by RRM.
Introduction
Page 4 of 6 Doc. No.: 13S000411
Revision: A
Copyright © 2010 Rolls-Royce plc
4 Target Groups
The User Manual is primarily intended for the user of the system. The user must be
properly trained in using and maintaining the system.
The installation of the system components must be made by yard mechanics with
experience in fitting marine electronic equipment. Cabling into the units, wire
termination and screen/shield termination should be made by yard electricians that have
a certificate of apprenticeship or equal qualification on ship electrical installation.
Commissioning and testing must be carried out by field service personnel from Rolls-
Royce Marine, Dept. Propulsion Ulsteinvik or qualified service engineers from Rolls-
Royce Marine Global Support Network (GSN).
5 Terms and Abbreviations
Abbreviation or term Description
AC/DC Alternating Current/ Direct Current
AQM Aquamaster
AZP Azipull Thruster
BC Backup Control
CAN Controller Area Network
CCW Counter Clock Wise
CW Clock Wise
DC/DC Direct Current/ Direct Current
ESD Electrostatic Discharge
EU European Union
GSN Global Support Network
GUI Graphical User Interface
I/O Input/Output
LCD Liquid Crystal Display
LED Light Emitting Diode
MP Main Propulsion
NC Normally Closed
PMS Power Management System
PTI Power Take In
PTO Power Take Out
RC Remote Control
RPM Revolutions Per Minute
RR Rolls-Royce
RRM Rolls-Royce Marine
RUP Running Up/Down Program
SAT Sea Trial Acceptance Test
STBD Starboard
TCNS Thruster Compass Nozzle Swing-Up
TT Tunnel Thruster
VVolt
Introduction
Page 5 of 6Doc. No.: 13S000411
Revision: A
Copyright © 2010 Rolls-Royce plc
1
VAC Volts Alternating Current
VDC Volts Direct Current
Abbreviation or term Description
Introduction
Page 6 of 6 Doc. No.: 13S000411
Revision: A
Copyright © 2010 Rolls-Royce plc
Copyright © 2010 Rolls-Royce plc
The content of this document is the property of Rolls-Royce plc and may not be redistributed in whole or in part thereof without
express written consent of Rolls-Royce plc.
2
Doc. No.: 13S000411
Revision: A
Safety
1 Introduction .................................................................................................. 3
2 Disclaimer .................................................................................................... 3
3 Safety Instructions ...................................................................................... 4
3.1 Safety Functions ............................................................................................4
3.1.1 Pitch Control .......................................................................................4
3.1.2 RPM Control Electric Engine .............................................................. 4
3.1.3 Azimuth Control ..................................................................................5
3.1.4 Dynpos and Joystick ..........................................................................5
3.1.5 Autopilot .............................................................................................5
4 Safety Messages ..........................................................................................6
Copyright © 2010 Rolls-Royce plc
Doc. No.: 13S000411
Revision: A
Indice
