Runxin F71B1 Manuale utente

Multi-functional Flow Control Valve for

Water Treatment Systems

53502（Old Model No.: F71B1）

53502B（Old Model No.:F71G1）

53504（Old Model No.:F67C1）

53504B（Old Model No.:F67G1）

53510（Old Model No.:N75A1）

53510B（Old Model No.:N75B1）

User Manual

Please read this manual in details before using the valve

and keep it properly in order to consult in the future.

0WRX.466.508

China Patent No.: ZL02220153.X,

ZL02257746.7

MODEL F71B/F71G/F67C/F67G/N75A/N75B

Before the valve put into use, please fill in the below content so as to

help us to refer in the future.

Filter System Configuration

Tank Size: Dia. mm

Height mm

Refilled Filter Materials Kg

Granularity of Filter Materials mm

Control Valve Model

Number

Pressure of Inlet Water MPa

Turbidity of Inlet Water FTU

Water Source: Ground-water□；Filtered Ground-water □；

Tap Water □；Other .

Parameter Set

Parameter

Unit

Factory

Default

Actual Value

Service Days（Time clock type,

by days）

Service Hours （Time clock

type, by hours）

Rinsing Time

02∶00

Rinsing Frequency

F-00

Backwash Time

Min.

Fast Rinse Time

Min.

Output Mode b-01（02）

b-01

MODEL F71B/F71G/F67C/F67G/N75A/N75B

Catalogue

Notice......................................................................................................

1. Product Overview .............................................................................

1.1. MainApplication& Applicability............................................

1.2. Product Characteristics .........................................................

1.3. Service Condition...................................................................

1.4. Product Structure and Technical Parameters ....................

1.5. Installation................................................................................

2. Basic Setting & Usage .....................................................................

2.1. The Function of PC Board....................................................

2.2. Basic Setting & Usage...........................................................

3.Applications........................................................................................

3.1. Filter Flow Chart................................................................17

3.2. The Function and Connectionof PC Board.......................

A. Signal Output Connector...................................................

B. Interlock ...............................................................................

C. Pressure Relief Output......................................................

D. Remote Handling Connector............................................

3.3. System Configuration and Flow Rate Curve......................

3.4. Parameter Enquiryand Setting............................................

3.5. Trial Running...........................................................................

3.6. Trouble-Shooting ....................................................................

3.7.Assembly& Parts...................................................................

4. Warranty Card...................................................................................

MODEL F71B/F71G/F67C/F67G/N75A/N75B

Notice

To ensure normal operation of the valve, please consult with

professionalinstallation or repairing personnel before use it.

If there are any of pipeline engineering and electric works, there must

be finished by professionalat the time of installation

Do not use the control valve with the water that is unsafe or unknown

quality.

Depending on the changing of working environment and water

requirement, each parameter of filter should be adjusted accordingly.

Test water periodicallyto verify that system is performing satisfactorily.

Do not put the valve near the hot resource, high humidity, corrosive,

intense magnetic field or intense librations environment. And do not

leave it outside.

Forbidden to use the drain pipeline or other connectors as support to

carry the system.

Please use this product under the water temperature between 5～50℃,

water pressure 0.15～0.6MPa. Failure to use this product under such

conditions voids the warranty.

If the water pressure exceeds 0.6Mpa, a pressure reducing valve must

be installed before the water inlet. While, if the water pressure under

0.15MPa, a booster pump must be installed before the water inlet.

It is suggested to install PPR pipe, corrugated pipe or UPVC pipe,

instead of TTLSG pipe.

Do not let children touch or play, because carelessness operating may

cause the procedure changed.

When the attached cables of this productand transformer are changed,

they must be changed to the one that is from our factory.

For 53510(N75A) and 53510b(N75B1) product, in order to dismantle

MODEL F71B/F71G/F67C/F67G/N75A/N75B

easily, itis suggested to installthe strainer with M88×2 male thread.

1. Product Overview

1.1. MainApplication&Applicability

Used for filtering water treatment systems

Be suitable for

Residential filtering system

Swimming pool filtering equipment (N75A1/53510,

N75B1/53510B）

Carbon filter or sand filter in RO pretreatment filtering system

1.2. ProductCharacteristics

Simple structure andreliable sealing

It adopts hermetic head faces with high degree pottery and

corrosion resistance for opening and closing. It combines with Service,

Backwash, and Fast Rinse.

No water pass the valvein rinsingin single tanktype

Manual function

Realize rinsing immediately by pressing “ ” at any time.

Long outage indicator

If outage overrides 3days, the time of day indicator “12:12”will flash

to remind people to reset new time of day. The other set parameters do

not need to reset. The processwill continue to work after power on.

LED dynamic screen display

The stripe on dynamic screen flash, it indicates the control valve is

in service; otherwise, it is in rinsing cycle.

Buttons lock

MODEL F71B/F71G/F67C/F67G/N75A/N75B

No operations to buttons on the controller within 1 minute, button

lock indicator light on which represent buttons are locked. Before

operation，press and hold the “ ”and“ ” buttons for 5 seconds to

unlock. Thisfunction can avoid incorrect operation.

Rinsing frequency

It could set up multiple rinsing times, which means several times of

backwash and fast rinse but one time of service. It is much better for

cleaning the filter materials.

There are two kinds of time clock types

Time clock type valve can be chosen to be service by hours ,by

dialing the red switch on main control board to “1” (Refer to the Figure

3-1). Pointing to “ON” mean the time clock type service by days; “1”

means the time clock type service by hours.(Attention: after dialing the

switch, please restart the power)

Interlockfunction

It has a function of interlock to realize only one valve in rinsing, but

the other valves are in service while there are several valves parallel in

system. In multi-steps treatment systems such as RO pre-treatment,

when several valves are in series, there is only one valve in rinsing to

ensure pass water all the times while different valves in

rinsing.(Application refer to Figure 3-10)

Signal output

There is a signal output connector on main control board. It is for

controlling external wiring ( Refer to Figure from Figure3-2 to Figure 3-9).

There are two kinds of output modes. b-01 Mode: Turn on start of

regeneration and shut off end of regeneration; b-02 Mode: Signal

available only intervals of rinsing cycles and In service.

MODEL F71B/F71G/F67C/F67G/N75A/N75B

b-01

b-02

Remote handling input

This connector can receive external signal, used together with PLC,

and computer etc. to control the valve. （Application refer to Figure3-12）

Pressure reliefoutput

The valve will cut off feeding water to drain line when it switches in

rinsing cycles (Same as signal output b-02). Thus in some water

treatment system, e.g. Deep Well, one booster pump was installed on

the inlet to increase the system water feeding pressure, this cut-off will

cause pressure on inlet rinsing too fast to damage the valve. Pressure

Relief Output can be used to avoid this problem. (Application refer to

Figure3-11).

All parameters can be modified

According to the water quality and usage, the parameters in the

processcan be adjusted.

MODEL F71B/F71G/F67C/F67G/N75A/N75B

1.3. ServiceCondition

Filter Valve should be used under the belowconditions:

Items

Requirement

Working

conditions

Water pressure

0.15MPa～0.6MPa

Water temperature

5℃～50℃

Working

environment

Environment

temperature

5℃～50℃

Relative humidity

≤95%（25℃）

Electrical facility

AC100～240V/50～60Hz

Inlet water

quality

Water turbidity

＜20FTU

Note:

The parameter in the above chart is only suitable for the filter matched

with our filter valves.

When the water turbidity exceeds the conditions, the impurity in the

inlet water should be coagulated and precipitated firstly.

1.4. ProductStructureandTechnicalParameters

Dimension

(The appearance is just for reference. It is subjected to the real product)

MODEL F71B/F71G/F67C/F67G/N75A/N75B

Model

A(mm)

max

B(mm)

max

H(mm)

max

Transformer

Output

FlowRate

m3/h

@0.3MPa

F71B（53502）

182.5

195.5

143

DC12V,

1.5A

2.0

F71G

（53502B）

199

180

167

MODEL F71B/F71G/F67C/F67G/N75A/N75B

Model

A(mm)

max

B(mm)

max

H(mm)

max

Transformer

Output

FlowRate

m3/h

@0.3MPa

F67B（53504）

180

194

178.5

DC12V,

1.5A

4.0

F67G

（53504B）

242

204

198

Model

A(mm)

max

B(mm)

max

H(mm)

max

Transformer

Output

FlowRate

m3/h

@0.3MPa

N75A（53510）

220

346.5

230.5

DC24V,

1.5A

10.0

N75B

（53510B）

216.5

346.5

247

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Runxin Unità di controllo

Runxin

Runxin 63504 Manuale utente

Runxin

Runxin 51240B (F112BS) Manuale utente

Runxin

Runxin N74Q1 Manuale utente

Runxin

Runxin 53520 Manuale utente

Runxin

Runxin 53515 Manuale utente

Runxin

Runxin 73605 Manuale utente

Runxin

Runxin F104 A Manuale utente

Runxin

Runxin F139 Manuale utente

Runxin

Runxin 63510 Manuale utente

Runxin

Runxin F79A-LCD Manuale utente

Runxin

Runxin F56A Manuale utente

Runxin

Runxin 63504 Manuale utente

Runxin

Runxin 51215 Manuale utente

Runxin

Runxin 55504 Manuale utente

Runxin

Runxin 17603 Manuale utente

Runxin

Runxin 63518 Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente