Runyon RHOPOINT METER Manuale utente
INSTRUCTION
MANUAL
RUNYONDATASERVICES.COMPATENT PENDINGRUNYON DATA SERVICES
2 RUNYON DATA SERVICES RUNYONDATASERVICES.COM
Safety Precautions 03
Rhopoint Meter Initial Setup 04
MarSurf PS 10 Meter Initial Setup 09
Cart Setup 14
Enable Remote Control 21
Working With Runyon App/Taking First Reading 23
Terminate Control by Remote Computer 28
CONTENTS
Follow all safety measures
as detailed in the
MarSurf PS 10 and Rhopoint
operator’s manuals.
3 RUNYON DATA SERVICES RUNYONDATASERVICES.COM
Meter software is continually updated,
which may aect certain setup screens,
and functions. Contact your Runyon
Representative with any questions.
1. Keep the base of the Rhopoint Meter in a safe
place when the meter is in use. Store the meter
in its base when not in use. Note: If your case is
made with custom foam, keep both meters in the
cart, and store in the case.
2. For the MarSurf PS 10 Meter, don’t forget to
remove the red stylus shipping clip before use.
Store in a safe place and reattach the clip for
storage and/or transportation.
3. Tilt cart back by using the handle before moving.
DO NOT let the meters drag along the ground.
4. Take the Rhopoint Meter out of remote control
before shutting down.
5. Do not place the cart down on rough patches of
concrete or other rough surfaces.
ADDITIONAL MEASURES:
SAFETY PRECAUTIONS
4 RUNYON DATA SERVICES RUNYONDATASERVICES.COM
RHOPOINT METER
INITIAL SETUP
5 RUNYON DATA SERVICES RUNYONDATASERVICES.COM
MAKE SURE “Memory” IS: OFF
Menu
SETUP
Memory: OFF
GO TO MEASUREMENT MENU
Setup
BACK
Measurement Menu
RHOPOINT METER
SELECT
ENTER
SELECT SET SETUP
6 RUNYON DATA SERVICES RUNYONDATASERVICES.COM
MAKE SURE “Haze” IS SET TO: Haze
Measurement
BACK
Haze: Haze
GO TO CONTROL MENU
Setup
BACK
Control Menu
RHOPOINT METER
SELECT
ENTER
SELECT SET
BACK
7 RUNYON DATA SERVICES RUNYONDATASERVICES.COM
SELECT AND SET AS SHOWN
Control
BACK
ID: ON
SOF/EOF: ON
BT Wireless: OFF
BT Mode: RC
USB Mode: RC
GO TO INSTRUMENT SETUP
Setup
BACK
Instrument Setup
RHOPOINT METER
SELECT SET
BACK
SELECT ENTER
SET “Power O” TO: DISABLED
SET “USB Charge”TO: 100/500mA
SET “Date & Time” CORRECTLY
GO “BACK” TO MAIN SCREEN
GREAT JOB!
RHOPOINT METER
SETUP COMPLETE
8 RUNYON DATA SERVICES RUNYONDATASERVICES.COM
RHOPOINT METER
100/500mA
Instrument Setup
BACK
Power Off: DISABLED
USB Charge: 100/500mA
Set Date & Time
SELECT SET
BACK
TAP“3 LINES” BUTTON TO ENTER MENU
9 RUNYON DATA SERVICES RUNYONDATASERVICES.COM
MARSURF PS 10 METER
INITIAL SETUP
PRESS THE “ON” SWITCH
TO POWER ON THE MARSURF PS 10 METER
10 RUNYON DATA SERVICES RUNYONDATASERVICES.COM
SELECT “Parameters”
SELECT “Ra” AND “Rz” ONLY
MARSURF PS 10 METER
TAP “OK”
Questo manuale è adatto per i seguenti modelli
1
Altri manuali Runyon Strumento di misura
