Sangean PR-D7 Manuale utente

PR-D7

Revision 1

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with

the instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves or other apparatus ( including amplifiers )

that produce heat.

9. Do not defect the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with one

wider than the other. A grounding type plug has two blades and a

third grounding prong. The wide blade or the third prong are

provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the obsolete

outlet – USA version only.

10. Protect the power cord from being walked on or pinched

particularly at plug, convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified

by the manufacturer, or sold with the apparatus. When a cart is

used, use caution when moving the cart/apparatus combination

to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused

for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate

normally, or has been dropped.

15.To reduce the risk of fire or electric shock, Do not expose this

appliance to Rain or Moisture.

16. The Shock Hazard Marking andAssociatedGraphical Symbol is

provided on the bottom panel of unit.

17.Apparatus shall not be exposed to dripping or splashing and no

objects filled with liquids, shall not be placed on the apparatus.

Controls

LCD Display

Speaker

Band Selection

LCDDisplay

Charge LED indicator

Alarm by radio

Alarm by buzzer

Power/Auto shut off button

Volume Control

TuningControl

Station Scan and Time Set

Station Presets

Battery Compartment

FM TelescopicAntenna

Headphone socket

DC In socket

Radio Band

Station Frequency

Sleep and Snooze

Clock Set

Clock

BuzzerAlarm

RadioAlarm

Frequency unit

Preset Station

Battery Power Indicator

Battery operation using alkaline batteries

1. Remove the battery cover on the back of the unit by sliding the

cover in the direction of the arrow.

2. Insert 6 xAA ( UM3, LR6 ) alkaline batteries into the spaces in

the compartment. Take care to ensure the batteries are

inserted with correct polarity as shown inside the battery

compartment.

3. Slide the battery switch to theAlkaline position and then replace

the battery cover.

Important:

when using alkaline batteries, the battery switch must be placed in

the alkaline position. Failure to do so could result in serious

damage to the batteries or radio.

Reduced power, distortion and a “ stuttering “ sound are all signs

that the batteries may need replacing.

If the radio is not to be used for any extended of time,

it is recommended that the batteries are removed from the radio.

We would suggest for economy that the radio is used via the

supplied AC power adaptor whenever possible, with battery

operation for occasional or stand-by use only. If extended listening

using anticipated, then the use of rechargeable batteries is

suggested.

Battery operation using rechargeable batteries

1. Remove the battery cover on the back of the unit by sliding the

cover in the direction of the arrow.

2. Insert 6 x rechargeable AA ( UM3 ) batteries into the spaces in

the compartment. Take care to ensure all batteries are inserted

with the correct polarity as shown inside the battery

compartment. The radio is designed to be used with Nickel

Metal Hydrive ( NiMH ) rechargeable batteries.

3. Slide the battery switch to the Rechargeable position and then

replace the battery cover.

4. Insert the suppliedAC power adaptor into theDC IN socket on

the left hand side of the radio and plug the adaptor into a

standard 13A mains socket outlet.

5. The charge light will flash indicating batteries are charging.

Batteries will be fully charged in around 7 hours while charge

LED will stop flashing.

Important:

when using rechargeable batteries, the battery switch must be

placed in the Rechargeable position. Batteries will only be charged

when the radio is switched off and connected to the AC adaptor.

6. Reduced power, distortion and a “ stuttering “ sound are all signs

that the batteries may need recharging. Charge LED will be

lighted when batteries have no power to turn on the radio.

7. If the radio is not to be used for any extended period of time,

it is suggested that the batteries are removed from the radio.

Note:

Please be aware that the rechargeable battery undergoes a time

of charging and discharging, the battery capacity will gradually

decline during over time with repeated use. The battery icon shows

the remaining battery life on the LCD screen when the radio is

turned on. In addition, the calculation of charging time is based on

the capacity of the rechargeable battery and charging current power

output of the charger. The two examples in the below table are for

your reference only.

PR-D7(p6)

Size Model Capacity

(mAh)

Charging Current

(mA)

350

Charging Time

(hrs)

2600

1800 Approx.AA GP2700

GP1800 Approx. 7.5

5GB

6-1

Using the supplied AC power adaptor

The supplied AC adaptor is 12 Volts DC output 500 mA center

pin positive.

1. Insert the adaptor plug into the DC IN socket on the left hand

side of the radio.

2. Plug the adaptor into a standard 13A mains socket outlet.

Whenever the adaptor is plugged into the radio and switched on

the mains, the batteries are automatically disconnected.

If the adaptor is plugged into the radio but not the mains is not

switched on then the radio will run from the batteries if fitted.

The AC adaptor should be disconnected from the mains supply and

the radio when not is use.

Setting the clock

1. Clock can be set either the radio is power on or off.

2. Display will show “ - : - - “ when the batteries are installed when

the radio is connected to the mains supply.

3. Press and hold the button for more than 2 seconds,

display will flash time set symbol and also the hour digit,

followed by a beep.

4. Press Tuning Up/Down to set required hour.

5. Press button again, the minute digits will flash.

6. Press Tuning Up/Down to set required minute.

7. Press button to complete time setting.

Operating the radio

This radio is equipped with three tuning methods – Scan tuning,

Manual tuning and Memory presets recall.

Scan tuning

1. Press the Power button to turn on the radio.

2. Select the required waveband by pressing the Band button.

For FM band fully extend and rotate telescopic aerial to get

best reception. For AM ( MW ) band, rotate the radio to get

best signal.

3. Press and release Scan button ( long press Scan button more

than 2 seconds will activate time setting ), the radio will up

search and stop automatically when it finds a radio station with

good signal.

Press the Scan button again to pick up the found station.

The radio will continue to search next available stations if you do

not press Scan button again when it finds a radio station.

4. Rotate the Volume Control to get required sound level.

5. To turn off the radio, press the Power button. Display will

show OFF.

Altri manuali per PR-D7

Indice

Altri manuali Sangean Radio

Sangean

Sangean DPR-65 Manuale utente

Sangean

Sangean WFR-2D Manuale utente

Sangean

Sangean U4X Manuale utente

Sangean

Sangean PR-D7 Manuale utente

Sangean

Sangean WR-11 Manuale utente

Sangean

Sangean HDR-1 Manuale del proprietario

Sangean

Sangean LUNCH BOX Guida utente

Sangean

Sangean dpr-39 Manuale utente

Sangean

Sangean WR-1 Manuale utente

Sangean

Sangean WR-2 Manuale del proprietario

Sangean

Sangean WFR-28BT Manuale utente

Sangean

Sangean DT-250 Manuale utente

Sangean

Sangean PR-D5 Manuale utente

Sangean

Sangean dpr-39 Manuale utente

Sangean

Sangean PR-D2 Manuale utente

Sangean

Sangean PT-633 Manuale utente

Sangean

Sangean ATS-909 Manuale utente

Sangean

Sangean PR-D9CL Manuale utente

Sangean

Sangean WR-201D Manuale utente

Sangean

Sangean DPR-26BT Manuale utente

Sangean

Sangean FAT BOX Manuale utente

Sangean

Sangean SG-622 - MANUAL 2 Manuale utente

Sangean

Sangean DPR-25+ Manuale utente

Sangean

Sangean ATS-818 CS Manuale utente

Manuali Radio popolari di altre marche

EisSound

EisSound KBSound iSelect Manuale utente

Midland

Midland 1001LWX Manuale utente

Konig

Konig HAV-SR41 Manuale utente

Roberts

Roberts exprssion Manuale utente

VDigi

VDigi DD3.0 Manuale utente

Radio Shack

Radio Shack 21-1863 Manuale utente

Roberts

Roberts Stream 207 Manuale utente

Sony

Sony Walkman SRF-M97 Manuale utente

Stanley

Stanley FatMax FMC770 Manuale utente

auna

auna DAB-Radio 10026947 Manuale utente

SOUNDMASTER

SOUNDMASTER UR190 Manuale utente

HYT

HYT TC-320 Manuale utente

auna multimedia

auna multimedia Yellowstone 10026851 Manuale utente

B-Tech

B-Tech GMRS-V2 Manuale utente

Weierwei

Weierwei VEV-V8 Manuale utente

SOUNDMASTER

SOUNDMASTER DAB750 Manuale utente

Telefunken

Telefunken TF-1505 Manuale utente

Makita

Makita LXRM03 Manuale utente