9K600000000EJ 032438 220519
3.1 General overview of the Analyzer
E6000 is a portable analyzer for flue gas and emissions.
The instrument is equipped with:
Pneumatic circuit which can accommodate up to 6 sensors in the FLEX-sensors series.
Intuitive user interface: the instrument can be used without the support of the user manual.
Wide (55x95 mm) and bright TFT color display which delivers great readability thanks to the zoom function
and an efficient backlight.
Single rechargeable 'Li-Ion' battery pack, used to power both the unit and the thermal printer.
Thermal printer integrated in the instrument.
Connectivity with a computer through the USB connection and/or Bluetooth ®. Once the special software
provided with the instrument is used, this allows for the storage of combustion analysis as well as the
configuration of the main parameters.
Connectivity with a smartphone through Bluetooth®. Once the specific APP “E-Inst. App” available on Google
play-store is installed on the device, the user can start remote analysis of combustion and/or view real-time
data of the analysis in progress.
Main functions:
- Combustion analysis in manual or automatic mode (UNI 10389-1 or BImSchV or according to the data logger
function, user-defined mode).
- The analyzer is pre-installed with 12 commonly used fuel parameters (such as natural gas, #4 oil, diesel
wood, coal, propane, & LPG)
- The user can load and save parameters for 32 additional fuels if the fuels chemical are known.
- Monitoring of pollutants (emissions).
- Memory capable of storing up to 2,000 full analysis.
- Storing of acquired data and their averaging.
Measurable gases:
- CO, CO2, CxHy referenced to methane
- O2
- CO (ambient monitoring)
- CO / H2
- CO (low, medium, high)
- NO (low, medium)
- NO2 (low, medium)
- SO2 (low, medium)
- NOx
- H2S
- H2
Measurements:
- Ambient CO (with the internal sensor)
- Draft in the stack.
- Smoke (with the use of the external manual pump).
- Gas pressure in the piping, pressure in the burning chamber and check of the pressure switches, using the
measurement range up to 80 WC (200hPa).
- Combustion air measurement
- Auxiliary temperatures
- Air speed for air or flue gas leaving the stack with the use of Pitot tube
- Ionization current measurement (with external auxiliary probe)
3.0 WORKING PRINCIPLE
