Schmidt RM Series Manuale utente

Thickness Gauge

RM Series

Model RMU-30

RMU-50

RMU-75

RMP-30

Edition RM 01.0.E

Instruction Manual

Valid as of: 05.07.2012• Please keep the manual for future reference!

1 Preparation

Before using the thickness gauge, check the cleanliness of the measuring surface and the

measuring pin. If necessary, clean with a dry, lint-free cloth.

2 Setup

The measuring pin with the upper measuring insert is pressed onto the lower measuring

insert and held in this position or locked with the locking screw.

By pressing the key „OFF / ON“, the measuring instrument is switched on and with the key

„0“ the zero point is adjusted.

With the function key „mm / inch“ you can select the desired scaling.

3 Measuring

The thickness gauge is ergonomically designed and allows a precise and fast measuring

with one hand.

The entire measuring range is available because the movable measuring pin is constantly

guided by spring force in the upper position.

During the measuring process, the material to be measured is scanned by the measuring

inserts.

By means of a finger, the measuring pin is carefully pressed onto the test material and the

measured value is determined.

The function key „0“ allows to set the zero point at any point in the measurement

range. This allows very fast measurements to deviations from given

Tolerances etc. are performed.

The thickness gauge can be switched of by pressing the ON / OFF key.

S C H M I D T

c o n t r o l i n s t r u m e n t s

4 Notes to maintenance

The thickness gauge should be kept dry all the time. Water and other liquids should be kept

away as they endanger the electronics.

The device should not be cleaned with acetone.

Battery replacement is carried out as follows:

1. Open battery compartment in direction of the arrow, remove the lid

2. Replace the old battery, altough paying attention to the correct position of the poles.

Insert the new battery.

3. Insert the battery cover and push toward.

5 Specifications

Measuring Range 0 - 30 mm, 0 - 50 mm, 0 - 75 mm

Scaling 0.01 mm / 0.0005 inch

Display Liquid crystal, height of digits 10 mm

sign (-)

Battery 1 Stück SR 44

Jaw Aluminium alloy, high-strength

Finishing plasticized/galvan. Ni

Mailing address:

P. O. B. 1154

84464 Waldkraiburg Germany

Shipping address:

Schichtstr. 16

84478 Waldkraiburg Germany

Hans Schmidt & Co GmbH

Phone:

int. + 49 / (0)8638 / 9410-0

Fax:

int. + 49 / (0)8638 / 4825

int. + 49 / (0)8638 / 67898

More than 70 years - Worldwide -

e-mail:

[email protected]

Internet:

http://www.hans-schmidt.com

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Schmidt Strumento di misura

Schmidt

Schmidt DN Series Manuale utente

Schmidt

Schmidt MST Series Manuale utente

Schmidt

Schmidt DHT-2 Manuale utente

Schmidt

Schmidt HTG Series Manuale utente

Schmidt

Schmidt OS8000 Manuale utente

Schmidt

Schmidt ET Series Manuale utente

Schmidt

Schmidt SS 20.600 E Series Manuale utente

Schmidt

Schmidt FS-422 Series Manuale utente

Schmidt

Schmidt Z Series Manuale utente

Schmidt

Schmidt ZED Manuale utente

Schmidt

Schmidt DX Series Manuale utente

Schmidt

Schmidt MZ-422 Series Manuale utente

Schmidt

Schmidt D-2005 Series Manuale utente

Schmidt

Schmidt KLA Manuale utente

Schmidt

Schmidt Q-10 Manuale utente

Schmidt

Schmidt MK Series Manuale utente

Schmidt

Schmidt HP Series Manuale utente

Schmidt

Schmidt ZE Series Manuale utente

Schmidt

Schmidt Paper Schmidt PS8000 Manuale utente

Schmidt

Schmidt DW-D Manuale utente

Schmidt

Schmidt FS1-422 Manuale utente

Schmidt

Schmidt MK-12 Manuale utente

Schmidt

Schmidt SS 20.515 Manuale utente

Schmidt

Schmidt MZ Series Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente