Seada SD-PS-M641 Manuale utente
S h o w i n g t h e Wo r l d
SD-PS-M641
6x1 4K Presentation Switcher
with Multi-view & HDBaseT
All Rights Reserved
Version: SD-PS-M641_2021V1.0
6x1 4K Presentation Switcher with Multi-view & HDBaseT
Table of Contents
1. Product Introduction....................................................................................................1
1.1. Features ...........................................................................................................1
1.2. Package List .....................................................................................................1
2. Specification ...............................................................................................................2
2.1. SD-PS-M641 Switcher......................................................................................2
2.2. HBT70PHS-RX Receiver..................................................................................4
3. Panel Description........................................................................................................5
3.1. Switcher Front Panel ........................................................................................5
3.2. Switcher Rear Panel.........................................................................................6
3.3. Receiver Front and Rear Panel ........................................................................7
3.4. System Connection ..........................................................................................8
4. Front Panel Control.....................................................................................................9
4.1. Multi-view Mode Selection ................................................................................9
4.2. Full Screen Setting ...........................................................................................9
4.3. Swap Window Setting.......................................................................................9
4.4. Window Size Setting.......................................................................................10
4.5. Video Signal Switching ...................................................................................10
4.6. Switching Status Inquiry .................................................................................11
4.7. Audio Control..................................................................................................11
5. IR Remote Control ....................................................................................................12
6. GUI Control...............................................................................................................13
6.1. Control Tab .....................................................................................................14
6.1.1. Video Control........................................................................................14
6.1.2. Display Control .....................................................................................14
6.1.3. Audio Control........................................................................................15
6.2. Multiview Tab ..................................................................................................16
6.3. Display Setting Tab.........................................................................................17
6.4. Resolution Tab................................................................................................18
6.5. CEC Tab .........................................................................................................19
6.5.1. Source Control......................................................................................19
6.5.2. Display Control .....................................................................................19
6.5.3. User-defined CEC Command ...............................................................20
6x1 4K Presentation Switcher with Multi-view & HDBaseT
6.6. EDID Tab ........................................................................................................20
6.6.1. EDID Setting.........................................................................................20
6.6.2. EDID Upload.........................................................................................21
6.7. Network Tab....................................................................................................21
6.8. Tags Tab .........................................................................................................22
6.9. Security Tab....................................................................................................22
6.10. Additional Tab ...............................................................................................23
6.11. GUI Upgrade.................................................................................................23
7. RS232 Control ..........................................................................................................24
7.1. System Commands ........................................................................................24
7.2. Signal Switching Commands ..........................................................................25
7.3. Audio Setting Commands ...............................................................................26
7.4. Function Setting Commands ..........................................................................27
7.5. CEC Commands.............................................................................................31
7.6. Special Commands ........................................................................................33
8. Firmware Upgrade ....................................................................................................35
6x1 4K Presentation Switcher with Multi-view & HDBaseT
1. Product Introduction
Thank you for selecting the 6x1 4k presentation switcher. The presentation switcher
offers four HDMI, one display port and one USB-C inputs along with mirrored HDMI and
HDBaseT outputs. The HDBaseT output supports PoC and can be paired with a
compatible HDBaseT receiver to extend 4k@30Hz/1080P signal up to 40 meters
(131ft) / 70 meters (230ft) all over a single CATx cable.
The switcher features external line audio input that can be embedded into any HDMI
input, and provides microphone input for audio mixing. The presentation switcher
provides multi-view functionality and supports up to 16 multi-mode layouts. The
switcher features a wide range of control flexibility via front panel buttons, built-in web
GUI, IR remote, RS232 and CEC.
1.1. Features
⚫6x1 4K Presentation Switcher with HDBaseT output.
⚫Supports seamless and auto switching.
⚫HDMI 1.4 and HDCP 2.2 compliant.
⚫Extends HDMI signals to distance up to 40 meters at 4K and 70 meters at 1080p.
⚫Supports audio embedded, audio de-embedding and microphone audio mixing.
⚫Supports multi-view with 16 preset layouts and 4 custom layouts
⚫Controllable via front panel buttons, GUI, IR remote, RS232 and CEC.
1.2. Package List
SD-PS-M641 (NR) Switcher
HBT70PHS-RX Receiver
⚫1x 6x1 4K Presentation Switcher
⚫2x Mounting Ears with 4 Screws
⚫4x Plastic Cushions
⚫2x 3-pin Terminal Blocks
⚫2x 5-pin Terminal Blocks
⚫1x IR Remote
⚫1x IR Receiver
⚫1x IR Emitter
⚫1x RS232 Cable (3-pin to DB9)
⚫1x Power Adapter (24V DC 5A)
⚫1x Power Cord
⚫1x User Manual
⚫1x HDBaseT Receiver
⚫2x Mounting Ears with 4 Screws
⚫4x Plastic Cushions
⚫1x 3-pin Terminal Block
6x1 4K Presentation Switcher with Multi-view & HDBaseT
2. Specification
2.1. SD-PS-M641 Switcher
Video Input
Video Input
(4) HDMI IN (1~4), (1) DP, (1) USB-C
Video Input Connector
(4) Type-A female HDMI, (1) DisplayPort, (1) Type-C USB
Input Resolution
HDMI: Up to 4K@30Hz 4:4:4
DP: Up to 4K@30Hz 4:4:4
USB-C: Up to 4K@30Hz 4:4:4
Video Output
Video Output
(1) HDMI, (1) HDBaseT
Video Output Connector
(1) Type-A female HDMI, (1) RJ45
Output Resolution
HDMI: Up to 4K@30Hz 4:4:4
HDBaseT: Up to 4K@30Hz 4:4:4
HDMI Standard
Up to 1.4
HDCP Version
Up to 2.2
Audio Input
Audio Input
(1) LINE, (1) MIC
Audio Input Connector
(2) 3-pin terminal blocks
Frequency Response
20Hz ~ 20kHz, ±3dB
Max Input Level
2.0Vrms ± 0.1
L-R Level Deviation
< 0.3dB, 1kHz sine at 0dBFS level (or max level before clipping)
Input Impedance
> 10KΩ
LINE/MIC Audio Format
PCM 2.0
HDMI/DP Audio Format
PCM 2.0 48K
L+R Audio Output
Audio Output
(1) L+R
Audio Output Connector
(1) 5-pin terminal block
Frequency Response
20Hz ~ 20kHz, ±1dB
Max Output Level
2.0 ± 0.1Vrms
THD+N
< 0.05%, 20Hz ~ 20kHz bandwidth, 1kHz sine at 0dBFS level (or
max level)
SNR
> 80dB, 20Hz ~ 20kHz bandwidth
Crosstalk Isolation
< -70dB, 10kHz sine at 0dBFS level
6x1 4K Presentation Switcher with Multi-view & HDBaseT
L-R Level Deviation
< 0.3dB, 1kHz sine at 0dBFS level (or max level before clipping)
Output Load Capability
1KΩ and higher (Supports 10x paralleled 10KΩ loads)
Noise Level
-80dB
SPDIF Audio Output
SPDIF Out
(1) SPDIF
Audio Out Connector
(1) Toslink
Max Output level
±0.3dBFS
Frequency Response
20Hz ~ 20kHz, ±1dB
THD+N
< 0.05%, 20Hz ~ 20kHz bandwidth, 1kHz sine at 0dBFS level (or
max level)
Signal-to-Noise Ratio
> 90dB, 20Hz ~ 20kHz bandwidth
Crosstalk isolation
< -70dB, 10kHz sine at 0dBFS level (or max level before clipping)
Noise
- 90dB
Audio Format
PCM 2.0
Control
Control port
(1) CONTACT IN, (1) IR IN, (1) IR OUT, (1) IR EYE,
(1) FIRMWARE, (1) RS232, (1) TCP/IP
Control Connector
(1) 5-pin terminal block, (3) 3.5mm jack, (1) Type-A USB,
(1) 3-pin terminal block, (1) RJ45
General
Operation Temperature
-5℃ ~ +55℃
Storage Temperature
-25℃ ~ +70℃
Relative Humidity
10% ~ 90%
External Power Supply
Input: AC 100~240V, 50/60Hz; Output: 24V DC 5A
Power Consumption
90w (Max)
USB-C Power Charging
60w (Max)
Dimension (W*H*D)
250mm x 44mm x 200mm
Net Weight
1.6KG
6x1 4K Presentation Switcher with Multi-view & HDBaseT
2.2. HBT70PHS-RX Receiver
Input and Output
Input
(1) HDBT IN
Input Connector
(1) RJ45
Output
(1) HDMI OUT
Output Connector
(1) Type-A female HDMI
Control
(1) IR IN, (1) IR OUT, (1) RS232
Control Connector
(2) 3.5mm jack, (1) 3-pin terminal block
General
Maximum Video Resolution
4K@60Hz 4:2:0, including 1080p@60Hz
Transmission Mode
HDBaseT
Transmission Distance
1080p signal to 70m, 4K signal to 40m
Bandwidth
10.2Gbps
Video Standard
HDMI 1.4 with HDCP 2.2
Power Consumption
7 watts
Operation Temperature
-5℃ ~ +55℃
Storage Temperature
-25℃ ~ +70℃
Operating Humidity
0% ~ 90%
Power Supply
Input Power: 24VDC 1.25A or Power over HDBaseT (PoH);
AC Adaptor Input Power: 100~240VAC, 50/60Hz
Dimension (W*H*D)
115mmx16.2mm x109mm
Net Weight (g)
196g
6x1 4K Presentation Switcher with Multi-view & HDBaseT
3. Panel Description
3.1. Switcher Front Panel
①IR LED: Built-in IR sensor, receives IR signal sent from IR remote.
②POWER LED: Illuminates red when switcher is in standby mode or illuminates
green when device is powered on.
③INPUT BUTTONS (1~4): Input source selectors.
⚫HDMI/DP LED: Indicates HDMI or DP source for the third input channel.
⚫HDMI/USB-C LED: Indicates HDMI or USB-C source for the fourth input
channel.
④AUTO BUTTON: Auto switching mode selector.
⑤SWAP: Cycle swap the video source of window display in anticlockwise.
⑥MULTIVIEW: Total four buttons for choosing Multi-view mode.
⑦SELECT/FULL SCREENS (A~B): Four buttons for window selection and full
screen setting.
⑧RESIZE: Adjust the windows size.
⑨AUDIO SOURCE: Select the audio source, and the correspond LED (1~4) will
illuminate blue. When select the LINE audio, the button illuminates blue.
⑩VOLUME: Variable audio control
⚫Press the volume knob to select microphone or source audio control.
⚫Rotate the knob to increase or decrease the volume of the selected audio.
⚫Press and hold the knob at least 3 seconds to mute the selected audio, rotate
the knob to unmute.
6x1 4K Presentation Switcher with Multi-view & HDBaseT
3.2. Switcher Rear Panel
①INPUTS: Four HDMI inputs, one DisplayPort and one USB-C input.
②OUTPUTS: One HDMI and one HDBaseT output. The HDBaseT output supports
48V PoC.
③AUDIO IN:
⚫LINE: Line audio input which can be embedded in any HDMI input.
⚫MIC: Microphone input for audio mixing. Set 48V phantom power mode switch
as needed: ON for Condenser microphone; OFF for Dynamic microphone.
④AUDIO OUT:
⚫L+R: Balanced analog audio ouput for audio de-embedding.
⚫SPDIF: Digital SPDIF audio output for audio de-embedding.
⑤CONTROL:
⚫CONTACT IN: Contact external sensors, buttons and other devices for input
source selection.
⚫IR IN: Connects to IR receiver for IR pass-through.
⚫IR OUT: Connects to IR emitter for IR pass-through.
⚫IR EYE: Connects to IR receiver for local switcher control.
⚫FIRMWARE: Type-A USB for firmware upgrade.
⚫RS232: 3-pin terminal block for RS232 control.
⚫TCP/IP: RJ45 port to control the switcher via GUI.
⑥DC 24V: DC connector for power adapter connection.
DC 24V
HDBT
HDMI1. HDMI 4. HDMI
2. HDMI 3. HDMI 3. DP
INPUTS OUTPUTS
4. USB-C
AUDIO IN
L R
LINE
Tx Rx
IR EYEIR IN IR OUT TCP/IPRS232
CONTROL
ON
Phantom 48V)
(
OFF
MIC
AUDIO OUT
FIRMWARE
L RCONTACT IN
1 2 3 4
SPDIF
1
345
26
6x1 4K Presentation Switcher with Multi-view & HDBaseT
3.3. Receiver Front and Rear Panel
①LINK: HDBT Link status indicator:
⚫OFF: No Link.
⚫GREEN: Link Successful.
⚫Blinking GREEN: Link abnormal.
②HDCP: HDCP compliant indicator
⚫OFF: No HDMI traffic.
⚫GREEN: Traffic with HDCP.
⚫Blinking GREEN: Traffic without HDCP.
③POWER LED: Illuminates red when device is powered on.
④RS232: 3-pin terminal block for RS232 control.
⑤IR IN: Connects to IR receiver for IR pass-through.
⑥IR OUT: Connects to IR emitter for IR pass-through.
⑦HDMI Output: Connect with HDMI display.
⑧HDBaseT input: Connect to the HDBT OUT port on the transmitter via CAT5e/
CAT6a cable.
⑨DC 24V: DC connector for power adapter connection.
123456789
Indice
Altri manuali Seada Interruttore
