Seametrics FT430 Manuale utente

The Home screen displays total ow volume and ow rate. The four buttons below the LCD

display are used to access menu screens for viewing and changing setup parameters.

Press the check mark key to enter a submenu.

0.00

GPD

MID

R UNITSET K T UNIT SET D

SET P RESET EXIT

086238.235

PRESS TO SET NUMBER

OF PULSES RECEIVED PER

GALLON OF FLOW

R UNITSET K T UNIT SET D

SET P RESET EXIT

FLOW RATE = GPD

PRESS TO SET UNITS

FOR DISPLAY

The K factor is the number of pulses the ow sensor provides for every gallon of ow.

(Note that the decimal is xed at three places. If you only have two decimal places

for your K-factor, enter a zero for the third digit. If unable to set K-factor, the unit is

“locked” to prevent tampering. Please contact your distributor for assistance.)

View or change the ow rate display units.

FT430, 440 & 450

Quick Setup Guide

The Home Screen

Set K Factor (SET K)

Set Rate Display (R UNIT)

Page 1 of 2

The left/right keys are used to move through the menus and position the cursor during data entry. The up arrow is

used to scroll through the available values that are to be entered. For example, numerical values for K factor entry

or selection of units from the available options. The enter key (represented on the keypad by the check mark) is

used to save selected entries and in conjunction with the exit tab to move between menus screens. As one

navigates the menus, the current parameter setting is shown and instructions are displayed for how to change the

selected parameter.

Set Total Display Units (T UNIT)

Page 2 of 2

LT-14244-063015

6/30/2015

R UNITSET K T UNITSET D

SET P RESET EXIT

000

PRESS TO CHOOSE

NUMBER OF DECIMAL PLACES

IN TOTAL DISPLAY

R UNITSET K T UNIT SET D

SET P RESET EXIT

00000.0 GALLONS

PRESS TO SET NUMBER OF

GALLONS TOTALIZED PER

PULSE SENT OUT PULSE1

R UNITSET K T UNIT SET D

SET P RESET EXIT

PRESS TO EXIT MENU AND

RETURN TO FLOW DISPLAY

View or change the number of decimals displayed in the total volume display.

The factory setting will show Set P which allows one to view or change the volume of

ow totalized per pulse sent to pulse out 1. The units for Set P follow the units select-

ed for the rate display. Secondary menu selection will change the display to Set A. The

alarm can be set to trigger on either a high or low ow condition as determined by the

user.

Return to the home screen, enter a submenu, or accept a parameter change.

R UNITSET K T UNITSET D

SET P RESET EXIT

TOTAL = GALLONS

PRESS TO SET UNITS

FOR DISPLAY

View or change the total volume display units.

Set Number of Decimal Places (SET D)

Set Pulses & Alarms (SET P)

Exit & Save Setup (EXIT)

Altri manuali per FT430

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Seametrics Strumento di misura

Seametrics

Seametrics FT420 Manuale utente

Seametrics

Seametrics WMP Series Manuale utente

Seametrics

Seametrics FT400 Guida alla configurazione

Seametrics

Seametrics MJ Series Manuale utente

Seametrics

Seametrics MDE Manuale utente

Seametrics

Seametrics iMAG 4700r Manuale utente

Seametrics

Seametrics AG3000p Manuale utente

Seametrics

Seametrics FT420 Manuale utente

Seametrics

Seametrics FT400 Manuale utente

Seametrics

Seametrics iMAG 4700 Manuale utente

Seametrics

Seametrics jWAVE Manuale utente

Seametrics

Seametrics FT415 Manuale utente

Seametrics

Seametrics PD10 Manuale utente

Seametrics

Seametrics AG3000 Series Manuale utente

Seametrics

Seametrics AG2000 Manuale utente

Seametrics

Seametrics MJ Series Manuale utente

Seametrics

Seametrics jWAVE Manuale utente

Seametrics

Seametrics FT410 Manuale utente

Seametrics

Seametrics S Series Manuale utente

Seametrics

Seametrics WTP-400 Manuale utente

Seametrics

Seametrics jWAVE Manuale utente

Seametrics

Seametrics AG3000p Manuale utente

Seametrics

Seametrics EX800 Series Manuale utente

Seametrics

Seametrics iMAG 4700r Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente