Secure Premier 300 Manuale di istruzioni
METER TRACKSO CONNECTION MANUAL FOR SECURE PREMIER 300 METER
Brand: Secure
Models: Premier 300 with Modbus RJ11-RS485 Output
Note: Documentation is only valid for Meter model having RS485 Modbus communication facility.
CONNEC TI O N DIAGRAM
On the bottom side of the, Secure Premier 300 has an RJ11 socket which acts a RS-485 communication output as shown in the
following figure.
Figure S1
1. Create Connecting wire with RJ11 output with 4 wires.
2. Connect the cables to RJ11 socket at the bottom of the meter
Table ST1 –Secure Premier 300 RJ11-RS485
connections with TrackSo IoT Gateway
Secure Pin No. &
Assignment
TrackSo Pin No. &
Assignment
RJ11 –Pin 3
3
D+
RJ11 –Pin 4
4
D-
DEFAULT CONFIGURATION IN TRACKSO IOT GATEWAY
Inverter ID: 1
Baud Rate: 9600
Data Bits: 8
Stop Bit: 1
Parity: N/A (None)
CONFIGURATION AT THE METER END
SETTING BAUD RATE, DEVICE ID
-As per the local Secure representative the Device Id (Modbus Id) as well as baud rates remains fixed and cannot be
modified.
-No documentation is available in public domain or on manufacture website which confirm if Id and baud rate can be
changed.
-If found otherwise kindly inform us on [email protected]
CONNECTING MULTIPLE METER
As Modbus ID’s are not allowed to be changed multiple meters can not be connected on a single logger.
Altri manuali per Premier 300
1
Altri manuali Secure Strumento di misura
Secure
Secure Liberty 100 Manuale del prodotto
Secure
Secure Liberty 100 Manuale utente
Secure
Secure Elite 440 Manuale utente
Secure
Secure SSP 302 Istruzioni operative
Secure
Secure Sprint 211 Manuale utente
Secure
Secure Liberty EG4v12 Manuale operativo
Secure
Secure APEX 100 Manuale utente
Secure
Secure Premier 300 Manuale utente
Secure
Secure BGX501-806-R02 Manuale utente
Secure
Secure TRACKSO ELITE 103-2 Manuale utente
