SEH MyUTN-120 Manuale utente

Quick Installation Guide 1

Monday - Thursday

Friday

8:00 a.m. to 4:45 p.m. and

8:00 a.m. to 3:15 p.m. (CET)

℡+49 (0)521 94226-44

@[email protected]

USB SDCardserver

myUTN-120

Quick Installation Guide

Overview [en]

This Quick Installation Guide provides

a description of the installation of the

myUTN-120. It contains the following

information:

General Information

Safety Regulations

Hardware Installation

Software Installation

Getting Started

Configuring the UTN Server

Please note the table of contents on

page 3. Should you have any further

questions, please contact our support

hotline.

Überblick [de]

Dieser Quick Installation Guide beinhaltet

eine Beschreibung der Installation des

myUTN-120. Sie erhalten die folgenden

Informationen:

Allgemeine Information

Sicherheitsvorschriften

Hardware-Installation

Software-Installation

Erste Schritte

UTN-Server konfigurieren

Beachten Sie das Inhaltsverzeichnis auf

Seite 17. Falls Sie noch Fragen haben,

kontaktieren Sie unsere Support-

Hotline.

2 Quick Installation Guide

Date of Manufacture

The serial number includes the date of manufacture.

The serial number can be found on the type plate.

Quick Installation Guide [en] 3

2 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Scope of Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

LED Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

2 Safety Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2 Hardware Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2 Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2 Getting Started: SEH UTN Manager . . . . . . . . . . . . . . . 10

Starting the SEH UTN Manager . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Assigning an IP Address to the UTN Server . . . . . . . . . . . . . . 12

Adding the UTN Server to the Selection List . . . . . . . . . . . . . 13

Connecting SD Card Reader and USB Device to the Client 14

2 Configuring the UTN Server . . . . . . . . . . . . . . . . . . . . . . 15

 Table of Contents

4 [en] Quick Installation Guide

General Information

Purpose

The USB SDCardserver 'myUTN-120' is a network-ready SD card reader. In

addition, the myUTN-120 allows you to access a non-network-ready USB device

(e.g. hard disk, etc.) in the network. The USB device will be connected to the USB

port of the myUTN-120. The software tool 'SEH UTN Manager' handles the access

of the SD card reader and the USB device.

The SEH UTN Manager is installed on all clients that are intended to access the SD

card reader or a USB device in the network. The SEH UTN Manager shows the

availability of all devices in the network and establishes a connection between

the client and the SD card reader or USB device.

The administration of the myUTN-120 is done via the 'myUTN Control Center'.

Scope of Supply

Please check the package content before getting started:

UTN server USB SDCardserver 'myUTN-120'

Quick

Installation

Guide

The Quick Installation Guide provides a brief

description of the installation of the myUTN-120.

(This document)

Power pack External power pack

Quick Installation Guide [en] 5

Technical Data

Properties Values

Network connection logical:

physical: - IEEE 802.3

- RJ-45 (S/UTP Cat. 5)

Device connection - 1 x USB 2.0 HS

- 1 x SD card reader

SD card reader Card types: - SD, SDHC

Current input - 650 mA @ 5 VDC (without load)

- 1150 mA @ 5 VDC (with full load on the USB port)

Operating environment - Ambient temperature: 5 - 40 °C

- Relative humidity: 20 - 80 %

Dimensions - Width: 140 mm

- Height: 32 mm

- Depth: 99 mm

- Weight: 140 g

1) SD card reader

2) USB port

3) Link LED (green)

4) Activity LED (yellow)

5) Status LED (green)

6) Power LED (yellow)

7) LED for the SD card reader (green/

orange)

8) LED for the USB port (green/orange)

9) Network connector (RJ-45) for

1000BaseT, 100BaseTX and 10BaseT

10) Reset button

11) Connector for the included power pack

Front view

Rear view

6 [en] Quick Installation Guide

LED Display

The LEDs of the UTN server provide information about its status.

LED Action Color Description

Link permanently on

permanently off

green

There is a connection to the network.

There is no connection to the network.

Activity blinksatirregular

intervals yellow Indicates the exchange of network data

packets.

Status permanently off

blinks 3 times

blinks 2 times

green

If the activity LED blinks periodically at the

same time, the BIOS mode is signalized.

Indicates the assignment of a ZeroConfig IP

address.

Indicates the assignment of an IP address

that does not correspond to 0.0.0.0 or that

comes from outside the ZeroConf range.

Power permanently on

permanently off

yellow

The device is powered.

The device is not powered.

SD card reader permanently off

permanently on

green

orange

No SD card is available in the card reader.

An SD card is available in the card reader.

The SD card in the card reader is activated.

USB port permanently off

permanently on

green

orange

No USB device is connected to the port.

A USB device is connected to the port.

The USB device on the port is activated.

Quick Installation Guide [en] 7

Safety Regulations

UTN servers are network devices for use in office environments. The myUTN-120

is designed for the integration of USB devices and SD cards into TCP/IP networks.

Before starting the initial setup procedure and during the operation of the UTN

server, please note the following safety regulations. Their purpose is to protect

yourself and others from personal injuries, and avoid damage to the equipment.

Read the documentation and make sure that your system meets the

requirements listed therein.

Avoid contact with humidity or liquids.

The device must only be connected and operated if it is in perfect condition.

Make sure that no-one steps on or stumbles over the cables.

If the supplied power cord cannot be used in your country, acquire an

appropriate power cord that suits national provisions. For more information,

please consult your retailer.

Do not connect a telephone cable to the RJ-45 connector. The RJ-45

connector may only be connected to SELV voltages. For the connection to the

RJ-45 connector only STP cabling (category 5 or better) may be used. The

shielding must fit flushly to the connector.

The device must only be operated using the power pack included in the

package.

Only use a certified USB cable (< 3 m) listed at www.usb.org.

8 [en] Quick Installation Guide

Hardware Installation

You can directly connect one USB device to the UTN server (myUTN-120). You

can read and write SD cards via the SD card reader.

Do not connect devices with power supply solely via the USB port to the

UTN server.

Proceed as follows:

1. Connect the UTN server and the USB device to the USB data

cable.

2. Insert the SD card into the SD card reader.

3. Connect the network cable (RJ-45) to the UTN server.

4. Connect the power cord to the UTN server.

Quick Installation Guide [en] 9

Software Installation

The software tool SEH UTN Manager handles the access of the SD card reader and

the USB device. The SEH UTN Manager is installed on all clients that are intended

to access USB devices in the network.

The SEH UTN Manager is available in two versions:

Single-User Version (SEH UTN Manager)

Multi-User Version (SEH UTN Manager + SEH UTN Service)

A major difference between the single-user version and the multi-user version is

the Windows service 'SEH UTN Service'. A detailed description can be found in

the myUTN User Manual.

Make sure that:

- The installation of the SEH UTN Manager is suitable for Windows XP and

later.

- The installation can only be carried out by Windows users with

administrative rights.

First, you have to download the installation file for the SEH UTN Manager from

the homepage of SEH Computertechnik GmbH:

http://www.seh-technology.com/products/usb-device-servers/products/

myutn-120-downloads.html

Scan this QR code using your smart phone to get direct access to the homepage.

Proceed as follows:

1. Start the installation file.

2. Follow the installation routine.

The SEH UTN Manager is installed on your client.

10 [en] Quick Installation Guide

Getting Started: SEH UTN Manager

After the SEH UTN Manager is started, the network will be scanned for connected

UTN servers. The network range to be scanned is freely definable.

After the network scan all UTN servers found – together with the connected

devices – will be shown in the 'network list'. The preferred devices will be selected

and added to the 'selection list'. The devices in the selection list can be connected

to the client.

This chapter describes the first steps with the program.

’Starting the SEH UTN Manager’ 11

’Assigning an IP Address to the UTN Server’ 12

’Adding the UTN Server to the Selection List’ 13

’Connecting SD Card Reader and USB Device to the Client’ 14

Client and UTN server communicate via the UTN port 9200. This port must not be

blocked by a firewall. If necessary, you can change the port number and/or use a

secure UTN SSL port. A detailed description can be found in the myUTN User Manual.

Detailed information on how to use the SEH UTN Manager can be found

in the Online Help. To start the Online Help, select Help – Online Help

from the menu bar.



Indice

Lingue:

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente

SEH myUTN-120 Manuale utente

Manuali Server popolari di altre marche