OPERATING ELEMENTS
(1) Start
(2) Stopandpilotlightfor dooropen
(3) Reverseandthe lampwastebinfull
(4) KeySwitch
(5) Standby
(6) Mainswitch(canalsobe usedasemergencyoff button)
(7) Pilotlighttemperatureindicator
(8) Emergencyoff
STARTING THE MACHINE
Do not shred any material which may loop or splinter. Material, which does not
go through the cutting head can only be pushed in with the pusher (9). In case
of danger, press emergency off button (8).
. Turn main switch (6) into position "I"
. Emergency button (8) must be unlocked (turn to th right)
. Turn on the key switch (4) turn to the right then the standby (5) illuminates
. Press and release the black button (1) Conveyor belt is running
. Feed the paper over the total width of the conveyor belt
In case the quantity of material inserted is increased the machine automatically changes to a more
powerful and slower function. if this performance is still not sufficientthe machine starts to reverse
shortly and afterwards runs again forward. The machine switches between both speed levels until
all the material inserted is fully destroyed.
ATTENTION! If possible let the machine work at its normal speed. ~
Shred continuous paper only in stacks .~. , j'
Stoppingthe Machine
. Press the red key (2) or press the emergency OFF button (8).
Keep hands away from running shredding mechanism!
. Yellow pilot light (7) appears /1 I
Temperatureof the motor is too high
Decreasethe material on the conveyor belt to make the machine work in normal speed.
. Yellow pilot light (7) lights up
temperature is too high wait approximately 10 to 20 minutes until motor cools down.
STOPPING THE MACHINE
For short breaks
. Press and release the red button (2) Conveyor belt stops
For longer breaks
. Turn main switch (6) to position "0" - the entire machine shuts down
. Turn the key switch (4) and remove the key - now the machine is
secured from unauthorized use.
CHANGING THE WASTE BAG
Ifthe lampwaste bag full lights up you should emptythewastebag.
. Open the door (9)
. Pull out the waste bin from the machine
