SEM 0205 Manuale utente
!
Operation and Maintenance Manual
!
SEM Model 0205 EMD E-Media Destroyer
POP-0086 – Rev 0 | Created 3-27-19 – ECN-00340
Serial Numbers 000100 and up
For sales, service, parts, and customer support, contact us:
SECURITY ENGINEERED MACHINERY
5 Walkup Drive • Westborough, MA 01581
1-508-366-1488 • Toll Free US 1-800-225-9293
www.semshred.com
SEM Model 0205 EMD E-Media Destroyer
1
508.366.1488 | www.semshred.com
1
Table of Contents
!
Table of Contents .................................................................................................................................................. 1
Disclaimers ............................................................................................................................................................ 2
Safety Procedures .................................................................................................................................................. 3
1. Introduction ....................................................................................................................................................... 4
2. Items and Packaging .......................................................................................................................................... 4
2.1 Unpacking ................................................................................................................................................... 4
3. Operation ........................................................................................................................................................... 5
3.1 Unacceptable Media ................................................................................................................................... 5
3.2 Set Up………………………………………………………………………………………………………………………………………………….. 6
3.3 Powering On…………………………………………………………………………………………………………………………………………. 7
3.4 Feeding Media……………………………………………………………………………………………………………………………………….8
3.5 Display Messages…………………………………………………………………………………………………………………………………..9
3.6 Jams…………………………………………………………………………………………………………………………………………………… 10
3.7 Low Power/Standby Mode: ....................................................................................................................... 12
4. Maintenance .................................................................................................................................................... 13
4.1 Waste Bin Full ........................................................................................................................................... 13
4.2 Overheat Sensor ........................................................................................................................................ 13
4.3 Service Needed Symbol…………………………………………………………………………………………………………………………13
5. Contact and Accessories .................................................................................................................................. 14
SEM Model 0205 EMD E-Media Destroyer
2
508.366.1488 | www.semshred.com
2
Disclaimers
Every care has been taken by the staff of SEM in compilation of the data contained in all training and informational
materials (“collateral”) and in verification of its accuracy when published; however, the content of this collateral is
subject to change without notice due to factors outside the control of SEM and this collateral should therefore be used
as a guide only. The products referred to in these publications are continually improved through further research and
development, which may lead to the alteration of information contained in this collateral. SEM does not accept any
responsibility whatsoever for misrepresentation by any person of the information contained in this collateral and
expressly disclaims any and all liability and responsibility to any person, whether a reader/viewer of this collateral or
not, with respect to claims, losses, damage, or any other matter, either direct or consequential, arising out of or in
relation to the use and reliance upon any information contained or products referred to in this collateral. SEM does not
warrant that the equipment will work properly in all environments and applications, and makes no warranty or
representation, either implied or expressed, with respect to the performance, throughput, or maintenance
requirements of the machine. Performance, throughput, and maintenance requirements vary depending on screen size,
feed rate, and media type as well as operational procedures. Information in this collateral is subject to change without
notice and does not represent a commitment on the part of SEM. SEM assumes no responsibility for any inaccuracies
that may be contained in this collateral or any omissions that may have occurred. SEM makes no commitment to update
or keep current the information in this collateral and reserves the right to make improvements to this collateral and/or
to the products described therein at any time without notice.
Proprietary Information: This document contains proprietary and confidential information of SEM, and shall not be
used, disclosed or reproduced, in whole or in part, for any purpose, without the prior written consent of SEM. Title in
and to this document and all information contained herein remains at all times in SEM. This information is exempted
from disclosure under FOIA, as amended.
SEM Model 0205 EMD E-Media Destroyer
3
508.366.1488 | www.semshred.com
3
IMPORTANT SAFETY PROCEDURES
Your new electronic media shredder incorporates powerful, heavy duty cutting mechanisms. Serious and
permanent injury may result if proper precautions are not followed.
1. This equipment should never be operated by children or individuals that are untrained
or incapable of understanding these safety precautions.
2. Do not reach into the feed opening for any reason. Never insert fingers, hands, other
extremities, or objects not meant to be shredded into the feed opening.
3. Do not operate or come in close proximity to this equipment wearing long hair, necktie,
loose clothing, or jewelry which may activate a photoelectric on/off switch and/or be
pulled into the shredder.
4. Maintenance or repair of this equipment should be performed only be trained,
authorized service personnel.
5. Always disconnect electrical power (unplug) before removing or opening the cover or
other panels providing access to internal mechanisms.
SEM Model 0205 EMD E-Media Destroyer
4
508.366.1488 | www.semshred.com
4
1. Introduction
The SEM 0205 EMD is a robustly designed unit and incorporates hardened steel cutting shafts for sharpness longevity. It
also features a touch screen LCD interface for ease of use and extended capabilities. The 0205 EMD is also capable of
running on 120V or 230V power at 50Hz or 60Hz and comes equipped right out of the box to do so without any
alterations required by the user. Simply plug in the appropriate power cord depending on voltage supply.
2. Items and Packaging
The SEM 0205 EMD package should include the following items:
• 1 SEM 0205 EMD Electronic Media Destroyer
• 1 corrugated waste bin
• 3 plastic bags for the waste bin
• 1 U.S. style cord (NEMA 5-20P to IEC60320-C19) for use with 120V 60Hz current
NOTE: EU style cord is available for 230V 50 Hz operation and is sold separately. See the last page of this
manual for more details.
2.1 Unpacking
Upon receipt of your SEM 0205 EMD, be sure to inspect the unit for damage and note any such items on the Bill of
Lading, and contact SEM customer service. Retain packaging for at least 90 days.
SEM Model 0205 EMD E-Media Destroyer
5
508.366.1488 | www.semshred.com
5
3.) Operation
The SEM 0205 EMD Electronic Media Destroyer has been designed for secure destruction of solid state media, phones,
tablets (disassembled/board only), flash drives, and more. Phones, PDAs and small tablets can be destroyed ONLY after
removing the battery and LCD screens.
This unit is not designed to accept whole server/enterprise SSDs in housing and requires removal of the housing.
Commercial/consumer grade SSDs can be destroyed whole with no disassembly required.
3.1 Unacceptable Media
The following items should never be destroyed using this unit. ALWAYS remove batteries and capacitors as well as
large screws and thick metal parts before attempting to destroy media. It is also recommended to remove LCD
screens.
WARNING: Attempting to insert rotational hard drives or other thick metal parts
may cause damage to the unit and/or void the warranty.
Rotational Hard Drive
Batteries
Capacitors
SEM Model 0205 EMD E-Media Destroyer
6
508.366.1488 | www.semshred.com
6
3.2 Set Up
Before using the unit, ensure that the waste bin and a bag have been installed in the unit.
Attach the appropriate power cord to the receptacle at the rear of the unit. Attach the other end to a dedicated
wall outlet.
SEM Model 0205 EMD E-Media Destroyer
7
508.366.1488 | www.semshred.com
7
3.3 Powering On
Upon powering up, the display screen will immediately illuminate. The initial SEM splash screen will appear for
several seconds. It shows the unit name and model number.
• When the SEM splash screen disappears, the main user screen will now be displayed. The unit is now ready
for use.
• The READY TO FEED message is displayed. Anytime this message is displayed the unit is ready to accept
media for shredding. NEVER feed media if this message is not displayed as the previous shred cycle may not
be complete and the unit may jam if overfed.
SEM Model 0205 EMD E-Media Destroyer
8
508.366.1488 | www.semshred.com
8
3.4 Feeding Media
• Media can be fed by sliding it through the feed flap or by holding the feed flap open with your hand, letting
the media slide down the Ramp and then closing the feed flap.
• NOTE: Feed Flap <Open> will be displayed when the feed flap is held open.
• The unit will only begin shredding as soon as the feed flap closes.
• Media should be inserted into the center slot in the feed ramp, if it can fit.
• All SSDs should be fed into the center slot.
Unjam Door
Unjam Door
Screw
Feed Ramp
Feed Flap
Center Slot
SEM Model 0205 EMD E-Media Destroyer
9
508.366.1488 | www.semshred.com
9
3.5 Display Messages
The shred cycle will run for 10 seconds. Once the shred cycle starts, the WAIT! DO NOT FEED message will be
displayed.
NEVER feed media while this message is displayed, as the unit is busy shredding or not ready to accept media.
Feeding additional media before the unit has not completed the shred cycle may result in jamming the unit.
The green direction arrow is also displayed, indicating that the unit is running in the forward (shred) direction.
If the waste bin door, unjam door, or feed flap is opened by the user during a shred cycle, the unit will stop
shredding and the CONTINUE button will be displayed. When ready to continue press your finger on the CONTINUE
button. The unit will now run for an additional 10 seconds, since the previous cycle was interrupted, and the media
may not have fully passed through the shredder.
NOTE: The CONTINUE button will also appear anytime the waste bin door or unjam door are opened.
Indice
Altri manuali SEM Distruggidocumenti
SEM
SEM 0205NANO Manuale utente
SEM
SEM 0304 Manuale utente
SEM
SEM 1324C/3 Guida rapida
SEM
SEM 1012/5 Manuale utente
SEM
SEM 0300 Guida rapida
SEM
SEM 100 Manuale utente
SEM
SEM 4140CLK Istruzioni per il montaggio
SEM
SEM 2226 Series Manuale utente
SEM
SEM 800-1000 Series Manuale utente
SEM
SEM 266 Series Manuale utente
Manuali Distruggidocumenti popolari di altre marche
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Manuale di istruzioni
GBC
GBC ShredMaster CC055 Manuale utente
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Manuale utente
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Manuale utente
Rexel
Rexel Optimum AutoFeed+ 45X Manuale utente
Martin Yale
Martin Yale 227284S1 Manuale utente
