SEM 1201CC Guida rapida

Security Engineered Machinery Co., Inc

OPERATIONAL & MAINTENANCE MANUAL

SEM 1201CC Paper Shredder

As of January 1, 2008

Security Engineered Machinery Co., Inc.

NATIONWIDE SERVICE

Phone Toll Free: 1(800)225-9293

Email:[email protected]

Fax: (508)366-6814

Website: WWW.SEMSHRED.COM

https://www.supplychimp.com

INDEX

Forward……………………………………………………………………………………..3

Safety Precautions………………………………………………………………………..4-6

Specifications………………………………………………………………………………7

Parts Identification…………………………………………………………………………8

Operation Keys and Display……………………………………………………………….9

Safety Functions……………………………………………………………………….10-11

Installations………………………………………………………………………………..12

Operating Procedures………………………………………………………………….13-16

Troubleshooting……………………………………………………………………….17-18

Daily Maintenance………………………………………………………………………..19

Parts List………………………………………………………………………………20-35

For NATIONWIDE SERVICE call 1(800)225-9293 2

https://www.supplychimp.com

FORWARD

This manual provides the operation procedures for the paper shredder Model 1201PF.

Read this manual thoroughly before starting up the shredder. Keep this manual handy so

that you can refer to it at any time.

The signal words “Warning” and “Caution” found in this manual and on warning labels

affixed to the shredder correspond to the degree of injury that may result.

Indicates a potentially hazardous situation, if not

avoided, could result in serious injury.

Indicates a potentially hazardous situation which, if

not avoided, may result in minor or moderate injury.

It is also used to alert against property damage.

In addition to the signal words mentioned above, following two symbols are used to

indicate the prohibited actions and to highlight the important actions.

<Example> Indicates prohibited actions. Example means “do not

dismantle the product”.

Indicates mandatory actions or restricted actions. Example

means “pull out the power plug”.

DON NOT USED SHREDDER FOR ANY OTHER PURPOSE

THAN DESCRIBED IN THIS MANUAL.

For NATIONWIDE SERVICE call 1(800)225-9293 3

https://www.supplychimp.com

SAFETY PRECAUTIONS

WARNING

Keep out of reach of children, sharp cutters inside may cause injury.

Do not allow children to use the shredder and do not use it within

children’s reach. If they touch the shredder, injury, burn and/or electric

shock may result.

Do not use the shredder with any other voltage than specified in this

manual. Do not overload the receptacles by plugging too many leads into a

single socket. It may cause a fire or electric shock.

Do not remove the covers, cases or cabinets. Sharp cutters inside may

cause injury.

Do not damage, break or deform the power cord. Do not place heavy

objects on it, pull it or bend it forcedly. Damage power cord may cause a

fire or electric shock.

Do not modify the shredder; it may cause a fire or electric shock.

Stop using the shredder immediately when smoke is emitted, unusual

smell comes out and /or abnormal heat is generated. Turn off the power

switch and pull out the power plug. Then contact us at 800-225-9293. Do

not use it continuously a fire or electric shock may result.

If shredder comes in contact with any foreign material such as a metal,

water or any liquid, immediately turn off power switch and pull out the

power plug. Then contact us at 800-225-9293

For NATIONWIDE SERVICE call 1(800)225-9293 4

(S)

(1)

https://www.supplychimp.com

SAFETY PRECAUTIONS Cont….

Do not plug in or unplug the power cord with wet hands, electric shock

may result.

Do not carry out any maintenance or services other than the ones

mentioned in this manual. Opening or removal of covers will expose you

to dangerous moving parts, therefore may cause serious injury.

CAUTION

Do not insert hands or other objects into the throat opening, sharp cutters

inside may cause serious injury.

Do not hold paper near the feed opening with your hands and do not push

paper into it. The pulling force of the motor is very strong and hands may

get pulled in and seriously injured.

Keep all loose articles of clothing, long hair, ties, scarves, necklaces,

bracelets etc away from the feed opening. Injury may result if such items

are drawn in press the “STOP” button immediately.

Do not insert any article other than paper. Do not shred carbon paper, wet

paper, glue backed paper, stickers, self-adhesive envelopes, DHL/FEDEX

labels, security tape, adhesive tape, OHP films, magnet sheets, plastic bags

and clothes attention.

Do not, place shredder, on an unstable area such as an uneven floor or tilted

stand injury may result if it falls.

For NATIONWIDE SERVICE call 1(800)225-9293 5

https://www.supplychimp.com

SAFETY PRECAUTIONS Cont….

Do not install the shredder in humid or dusty place. Keep water away from

the shredder if water splashes on it fire or electrical shock may result.

Always pull out the plug before moving the shredder. If the power cord is

damaged a fire or electric shock may result.

Turn off the breaker after using the shredder. If it is not used for a long

period of time pull out the power plug. If it is plugged for a long time it

may cause a fire.

Do not pull the power cord when pulling out the plug. I the cord is

damaged a fire may result.

Do not place any heavy object on the shredder if it falls injury may result.

For NATIONWIDE SERVICE call 1(800)225-9293 6

https://www.supplychimp.com

SPECIFICATIONS

MODEL 1201CC

Feed opening/loading width 12.20” (310 mm)

Shred Size Approximately 1/25” x 1/5” (1X5 mm)

Cutting Type Cross Cut

Rated Sheet Capacity Letter size copy paper (70g/m)

Approximately 5 sheets (Maximum 12 sheets)

Cutting Speed Approximately 2– 9.8 meter per min.

Maximum Feeder Capacity For 8 ½” X 11” or smaller paper : 3.94”

For paper larger than 8 ½” X 11”: 1.38”

Input Voltage 120V AC / 8.0A (Max. 14A) / 60 Hz

Rated Power Consumption 800

Stand-by Power Consumption 0 W (5 min. after operation)

Dimensions 19.69” X 19.69” X 33.46” (500X500X850 mm)

Weight Approximately 186 lbs. (84.5 kg)

Other Super potential power unit (variable speed

control)

No power consumption during stand-by

Paper jam prevention mechanism

LCD display with backlight

Automatic start/stop, Automatic power cut-off

Overflow stop, Auto reverse, Auto cut

Cabinet door switch

Circuit breaker (used as power switch)

Safety beep, Error message, Caster

For NATIONWIDE SERVICE call 1(800)225-9293 7

https://www.supplychimp.com

PARTS IDENTIFICATION

NAME FUNCTION

(1) Throat Opening Paper to be shredded is fed through here

(2) Operation keys and display See Page 9

(3) Breaker used as Main switch Used as the main ON/OFF switch. It works

in case of circuit failure or motor lock in

order to protect the motor from burnout.

(4) Cabinet Door Opened to take out/put in the waste basket

(5) Waste Basket Shredded particles are stored here

(6) Casters Used to move the shredder, Front casters

have stoppers which should be locked at

the installation place.

For NATIONWIDE SERVICE call 1(800)225-9293 8

https://www.supplychimp.com

OPERATION KEYS AND DISPLAY

Shredder Main Body

NAME FUNCTION

(1) Liquid Crystal Display Current status is displayed

(2) STOP key Stops shredding and paper feeding

(3) START key (shredder) Pressing the upper side of this key after turning on the

breaker or during power saving mode makes shredder

ready for operation

(4) REVERSE key Cutting block runs in reverse while this key is pressed

For NATIONWIDE SERVICE call 1(800)225-9293 9

A'·

\¥I,,~.~

STOP

I •

START

https://www.supplychimp.com

SAFETY FUNCTIONS

Safety Devices

(1) Auto-cut (Motor overheating protection)

When motor is locked or overloaded for a certain period of

time the motor overheat protection is activated to cut off

the motor power. When activated a beep sounds and the

machine will stop. When motor is cooled the machine will

reset automatically and the alarm beeps again.

(2) Cabinet Door Switch

This prevents the shredder from operating while cabinet door is open.

(3) Overflow Stop

When the waste basket becomes full the shredder

automatically stops after leveling shredded material.

(4) Auto Reverse

When exceeding the maximum sheet capacity the

shredder may get jammed the shredder will stop and then

reverses automatically so that the jammed paper can be

removed. Pressing the REVERSE key also activates the

reverse operation.

(5) Circuit Breaker

To protect against circuit failure the motor is locked for a certain period of time, this

feature will protect the motor wiring from burnout and overload.

(6) Feed Opening Switch

The feed opening switch prevents the shredder from operating while the jammed

paper is being removed through its enlarged feed opening this operation uses the auto

reverse function.

For NATIONWIDE SERVICE call 1(800)225-9293 10

<U),

WAIT: COOLING

[J:> OFF MOTOR

Il»1

Icons light

upbytums

BASKET

FULL,

DISCARD WASTES

r,;;;;]

""'"

Ioh1

Uupbytums

OVERLOADING'

REMOVE PAPER

Il'ii1l

fICtl

Icons

nght

<4"l:!f.I

tums

https://www.supplychimp.com

Indice

Manuali Distruggidocumenti popolari di altre marche

Swingline

Swingline STACK-AND-SHRED200X&200XL 60X Manuale di istruzioni

GBC

GBC ShredMaster CC055 Manuale utente

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Manuale utente

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Manuale utente

Rexel

Rexel Optimum AutoFeed+ 45X Manuale utente

Martin Yale

Martin Yale 227284S1 Manuale utente

Bonsaii

Bonsaii DocShred C223-A Manuale utente

HSM

HSM Pure 740 max Manuale utente

TRU RED

TRU RED TR-BMC20A Manuale utente

Fellowes

Fellowes 50S Manuale utente

GBC

GBC SHREDMASTER 1236SE Manuale utente

Gude

Gude GH 2600 P Manuale utente

Ativa

Ativa DQ80M Manuale utente

Q-Connect

Q-Connect Q8CC Manuale utente

Fellowes

Fellowes POWERSHRED C-325CI Manuale utente

Olivetti

Olivetti Privacy 5000C Guida rapida

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Manuale utente

Dahle

Dahle paperSAFE 22022 Manuale utente