Openthe cabinetdoorby lightlypullingonthe upperrightcomerofthedoor. Pullthewasteboxfor-
wardandoutof thecabinet. Insertthe plasticwastebaginthe wasteboxfoldingthe excessover.
Pushthe boxinandclosethedoor. PlugShredderinto20 ampwalloutlet.
These models canbeoperatedbyturning the switch in the back of the shredder on and by using the
'forward', 'stop', and 'reverse' touch type push buttons. Use these buttonswhen cleaning the cutter
system or to clear a jam.
IMPORTANT: Materials other than common office paper may jam and/or damage the cutting unit.
Paper clips and staples should be removed from material being destroyed, to prolong life and trouble-
free operation of the cutting unit.
Iftoo much paper is fed into the machine, it will switch off automatically. Following a brief pause, the
machine will reverse automatically and the excess paper can be easily removed. Thin out the quanti-
ty of paper before resuming shredding. Ifthe cutting mechanism is frozen, do not attempt to run the
shredder alternately in the forward and reverse modes until the clogged material is released. Call for
service.
The motor is protected by a thermal overload device. Should the motor overheat, the thermal over-
load unit will automatically stop the motor. Should this occur, wait a brief period of time and let the
motor cool off.
For safety reasons, the shredder will not operate when the cabinet door is open.A red indicator light
on the control panelwill alert the user if the door is ajar.
Whenthewastebagisfull,the shredder will shut offautomatically.A redindicatorlightonthe control
3
