SEM 0304 Manuale utente
MAN-001 Rev. 4 | Created 3-10-2020 | ECN-00519
This manual covers all Model 0304 and Model 0305 congurations
For service, parts, and customer support, contact us:
SECURITY ENGINEERED MACHINERY
5 Walkup Drive | Westborough, MA 01581
508-366-1488 | [email protected]
www.semshred.com
SEM Model 0304 & 0305
Operation and Maintenance Manual
Model 0305 & 0304 Operation and Maintenance Manual
SEM | www.semshred.com 1
Contents
Disclaimers.............................................................................................................. 2
Safety ..................................................................................................................... 3
About Your Shredder - 0304................................................................................... 4
Overview and Intended Use...................................................................................4
Shredder Conguration ..................................................................................................4
About Your Shredder - 0305................................................................................... 5
Overview and Intended Use...................................................................................5
Shredder Conguration..........................................................................................5
Acceptable Media – HDD Combo Chute...............................................................6
Acceptable Media – SSD Combo Chute................................................................6
Unacceptable Media ..............................................................................................6
Unpacking and Installation .................................................................................... 7
Uncrating ................................................................................................................7
General Installation ............................................................................................... 8
Conveyor Shroud Installation ................................................................................. 9
Assembling Dust Cover .......................................................................................... 9
Electrical .............................................................................................................. 11
Installation ............................................................................................................11
Voltage Specications...........................................................................................12
Operation ............................................................................................................ 13
Standard and CE Control Scheme - 0304/0305 ...................................................13
Pre-Start Up..........................................................................................................13
Start Up Procedure and Operation ..................................................................... 14
Shut-Down Procedure ..........................................................................................15
Maintenance ......................................................................................................... 16
Maintenance Tools and PPE ................................................................................. 16
Maintenance Schedule ......................................................................................... 16
Air Filtration System ............................................................................................18
Current Relay Adjustment ....................................................................................21
Cutting Head Adjustment ...................................................................................22
Maintenance Diagrams ......................................................................................... 23
General Layout - 0305 ..........................................................................................23
General Layout - 0304 ..........................................................................................24
Drive System.........................................................................................................25
Extra Options and Spare Parts............................................................................. 26
Model 0305 & 0304 Operation and Maintenance Manual
2 SEM | www.semshred.com
Disclaimers
Every care has been taken by the staff of SEM in compilation of the data contained in
all training and informational materials (“collateral”) and in verication of its accuracy
when published; however, the content of this collateral is subject to change without
notice due to factors outside the control of SEM and this collateral should therefore
be used as a guide only. The products referred to in these publications are continually
improved through further research and development, which may lead to the alteration
of information contained in this collateral. SEM does not accept any responsibility
whatsoever for misrepresentation by any person of the information contained in
this collateral and expressly disclaims any and all liability and responsibility to any
person, whether a reader/viewer of this collateral or not, with respect to claims,
losses, damage, or any other matter, either direct or consequential, arising out of or in
relation to the use and reliance upon any information contained or products referred
to in this collateral. SEM does not warrant that the equipment will work properly in
all environments and applications, and makes no warranty or representation, either
implied or expressed, with respect to the performance, throughput, or maintenance
requirements of the machine. Performance, throughput, and maintenance requirements
vary depending on screen size, feed rate, and media type as well as operational
procedures. Information in this collateral is subject to change without notice and does
not represent a commitment on the part of SEM. SEM assumes no responsibility for any
inaccuracies that may be contained in this collateral or any omissions that may have
occurred. SEM makes no commitment to update or keep current the information in this
collateral and reserves the right to make improvements to this collateral and/or to the
products described therein at any time without notice.
Proprietary Information: This document contains proprietary and condential
information of SEM, and shall not be used, disclosed or reproduced, in whole or in
part, for any purpose, without the prior written consent of SEM. Title in and to this
document and all information contained herein remains at all times in SEM. This
information is exempted from disclosure under FOIA, as amended.
The combo SSD chute and SSD units intended for the destruction of solid state
media only. Attempting to shred rotational drives in the SSD chute could cause
catastrophic damage to the unit and will void warranty.
Model 0305 & 0304 Operation and Maintenance Manual
SEM | www.semshred.com 3
Safety
Read and understand instruction manual and be aware of all warning stickers.
Always follow proper PPE and lock out tag out procedures (LOTO).
Make sure that all guards and access panels are in place at all times, EXCEPT when the
power is locked off for maintenance work or cleaning.
Always know where emergency stop buttons are located.
Always know or have quick access to emergency phone numbers.
Always ensure that all maintenance and operating personnel read and understand this
manual, including those personnel working second or third shift.
Always have a standard break-in time for a new operator. A minimum of two hours is
suggested.
Always wear safety glasses when operating shredder.
Always lock-out power at the disconnect when shredder is not in use, when servicing
shredder, or when performing routine shredder maintenance. This includes cleaning.
Never operate this or any other machine while under the inuence of drugs, alcohol,
or medications.
Never wear loose tting clothing, ties, or jewelry while in the vicinity of this shredder.
Never allow long hair to be in the vicinity of the machine without use of a protective
hair net.
Never place any part of your body in or on any part of the machine while in operation.
Never allow other personnel within ten feet of this machine while in operation.
Never remove guards, perform maintenance, or clear jam up debris without rst
locking out power disconnect.
Never allow horse play around machine.
Never bypass or interfere with any safety limit switches or guards. They are safety
devices and serious injury can result if bypassed.
Never allow minors to operate the machine.
Model 0305 & 0304 Operation and Maintenance Manual
4 SEM | www.semshred.com
About Your Shredder
0304
For information about other cutting head congurations and features, such as wider
feed chutes, 11” X 2.5” (option to 19.25”W), contact SEM customer care.
The maintenance and operation information in this manual is also applicable to the
Model 0301 and 0302. Contact SEM Customer Care for electrical information or details
about these devices.
Overview and Intended Use
The SEM Model 0304 HDD/SSD Shredder employs a 20 horsepower motor to de
-
stroy up to 3,000 rotational or solid state hard drives or up to 3,500 e-media devices
(phones, RAM, etc.) per hour depending on the cutting head conguration chosen
at purchase. This unit is also capable of destroying enterprise drives at a rate of up
to 800 per hour, and up to 1,400 enterprise SSDs per hour. Solid state media can be
destroyed with a combo HDD chute but SEM recommends using the combo SSD chute
for higher security destruction.
Size and Weight:
When fully assembled, the SEM Model 0304 is approximately 67”
(170.18cm) tall by 65” (165.1cm) wide and 114” (289.56cm) deep. It weighs approxi
-
mately 4,700 lbs (2,100 kg).
Note:
The images shown in this manual may appear slightly different due to the age
of your machine and the features ordered with it. All functionality and locations re
-
main the same or very similar to your machine. Contact SEM customer service with any
questions. Some iimages may show optional features that must be ordered at time of
purchase.
Shredder Conguration
The SEM Model 0304 is designed to shred standard rotational hard drives, solid state
drives, tapes and various electronic media depending on the cutting head congura
-
tion chosen at the time of purchase. Hard drive shreds at 1.5” or 0.75” shred widths.
This can also shred SSDs but not to secure particle sizes.
HDD/SSD combo units have two cutting heads allowing destruction of both types of
media. HDD can be shredded to 38mm/1.5”, while SSD can be shredded to 0.375”.
Model 0305 & 0304 Operation and Maintenance Manual
SEM | www.semshred.com 5
About Your Shredder
0305
For information about other cutting head congurations and features, such as wider
feed chutes or .375 SSD shred widths contact SEM customer care.
The maintenance and operation information in this manual is also applicable to the
Model 0301 and 0302. Contact SEM Customer Care for electrical information or details
about these devices.
Overview and Intended Use
The SEM Model 0305 HDD/SSD Shredder employs a 10 horsepower motor to de-
stroy up to 3,000 rotational or solid state hard drives or up to 3,500 e-media devices
(phones, RAM, etc.) per hour depending on the cutting head conguration chosen
at purchase. This unit is also capable of destroying enterprise drives at a rate of up
to 800 per hour, and up to 1,200 enterprise SSDs per hour. Solid state media can be
destroyed with a combo HDD chute but SEM recommends using the combo SSD chute
for higher security destruction.
Size and Weight: When fully assembled, the SEM Model 0305 is approximately 66”
(167.64 cm) tall by 58” (147.32 cm) wide and 89” (226.06 cm) deep. It weighs approxi-
mately 2,800 pounds (1270 kg).
Note: The images shown in this manual may appear slightly different due to the age
of your machine and the features ordered with it. All functionality and locations re-
main the same or very similar to your machine. Contact SEM customer service with any
questions. Some images may show optional features that must be ordered at time of
purchase.
Shredder Conguration
The SEM Model 0305 is designed to shred standard rotational hard drives, solid
state drives, tapes and various electronic media depending on the cutting head
conguration chosen at the time of purchase. Hard drive shreds at 1.5”shred widths.
This can also shred SSDs but not to secure particle sizes.
HDD/SSD combo units have two cutting heads allowing destruction of both types of
media. HDD can be shredded to 1.5”, while SSD can be shredded to 0.375”.
Model 0305 & 0304 Operation and Maintenance Manual
6 SEM | www.semshred.com
Acceptable Media
HDD Combo Chute
The following media is acceptable to be destroyed with combo HDD chute:
• Rotational Hard Drive
• Enterprise Hard Drive
• Tapes
SSD Combo Chute
The following media is acceptable to be destroyed with an combo SSD chute:
• Solid State Drives
• Enterprise SSDs
Do not shred rotational hard drives using the combo SSD chute as damage to the
machine may occur and your warranty will be voided.
Unacceptable Media
The following materials should never be destroyed used a SEM Model 0305 shredder.
• Batteries
• Capacitators
• LCDs
Batteries and capacitors should never be destroyed using this machine. Both can be
found inside of cell phones, tablets, etc. They must be removed from all devices before
shredding. Destruction of batteries could lead to safety hazards and cause damage to
the machine. All batteries must be removed from cell phones, PDAs, tablets, etc. prior
to destruction.
Model 0305 & 0304 Operation and Maintenance Manual
SEM | www.semshred.com 7
Unpacking and Installation
Your new SEM shredder has been secured to a pallet for shipping. Please inspect
equipment immediately for shipping damage.
• Note any damage to the packaging or unit on the bill of lading and contact SEM
customer service.
• Retain packaging for 90 days.
• Using a lift truck with a minimum capacity of 4,000 lbs. Remove the machine from
the carrier and transport to operation site. Remove pallet and discard responsibly
after 90 days.
• SEM shredders are equipped with swivel casters for ease of handling.
• Inspect the machine for any damages prior to installation and operation. Check the
oil level and check for any oil leaks.
• After inspection, make certain that all guards and safety devices are installed
properly.
• If purchased, make sure to install the conveyor shroud and gaylord dust cover
before operation.
• Consumables are also included within shipments.
Uncrating
• Fork lift with 4,000 or 6,000 lb. capacity, see above.
• Pry bar
• Strap cutters
• Hammer, drill
• #2 Phillips, T20, T25 Bits, 9/16”socket wrench
Unpacking:
• Remove front and top of crate with drill and appropriate bits marked with
spraypaint. Cut straps holding the unit with strap cutters.
• Remove bolts holding brackets at the base of the unit in the front and back.
Remove boards in front and on top of the unit.
• Remove the unit from the pallet and bring as close to installation point as possible
with fork lift truck.
Model 0305 & 0304 Operation and Maintenance Manual
8 SEM | www.semshred.com
General Installation
This machine may be installed in an ofce or warehouse setting within six feet of an
appropriate electrical receptacle.
Note: The unit’s weight is mostly on the left side. Use care when moving and stay clear
if it begins to tip.
Note: It is recommended to move the unit as close to the installation area as possible
using a fork lift, particularly if it requires traversing uneven surfaces.
Storage: If unit requires storage, it can be stored in its shipping crate or unpackaged. If
unpackaged, ensure that all caster locks are engaged.
To transport, unlock all caster locks and then push on a at surface. Do not push this
unit on inclined or declined surfaces as control of the unit may be lost and damage to
the machine or injury to personnel may occur.
Install the output conveyor if not
installed. Requires metal shears,
one 1-1/8” open wrench or
adjustable wrench, 9/16” socket
wrench, and 1/2” wrench.
• With the assistance of an
overhead crane or a forklift, the
conveyor can be hoisted into
position. Use a sling to lift the
conveyor assembly into place,
then, using the bolts supplied
at rear of machine, attach
conveyor and tighten bolts.
• Install conveyor belt around
drive pulley (under cutting
head) and pull belt along belly
pan and top plate. A second
person may be necessary to bring both ends together. When both ends are put
together, take extra care to align the lacing. When aligned properly, put connecting
pin (supplied) through the lacing. Clip off any excess pin which may be hanging out.
• Tighten belt snug. Belt must be tight enough so that it cannot be stopped by a
hand.
Remove
hardware
from end of
conveyor.
Reinstall bolts
where they
were removed
(both sides).
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali SEM Distruggidocumenti
SEM
SEM 2226CC/3 Guida rapida
SEM
SEM 250 Manuale utente
SEM
SEM 0205NANO Manuale utente
SEM
SEM 1324C/3 Guida rapida
SEM
SEM 4140CLK Istruzioni per il montaggio
SEM
SEM 2226 Series Manuale utente
SEM
SEM 800-1000 Series Manuale utente
SEM
SEM 344 Series Guida rapida
SEM
SEM 1201CC Guida rapida
SEM
SEM 266 Series Manuale utente
Manuali Distruggidocumenti popolari di altre marche
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Manuale di istruzioni
GBC
GBC ShredMaster CC055 Manuale utente
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Manuale utente
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Manuale utente
Rexel
Rexel Optimum AutoFeed+ 45X Manuale utente
Martin Yale
Martin Yale 227284S1 Manuale utente
