Sencor SIRIUS 2 MINI Manuale utente
SIRIUS 2 MINI
BT speaker
BT reproduktor
BT reproduktor
BT hangszóró
Głośnik BT
EN - 2
INCLUDED CONTENTS
1x BT speaker SIRIUS 2 MINI
1x USB-C charging cable
1x user manual
BT SPEAKER DESCRIPTION
EN - 3
1 Next track button, volume up
2 Previous track button, volume down
1+2
switching off / switching on / changing the LED effect (short press of the
“+” and “-” buttons), switching off / switching on / changing the volume of
the alert tone mode (long press of the “+” and “-” buttons)
3 BT speaker on / off button (long press), change source (short press)
4 Press PLAY/PAUSE/TWS button, accept and reject incoming call
5 BT speaker status LED
6 Audio AUX IN mini jack (3.5mm) socket, RESET button
7 Memory card slot
8 Charging socket (USB-C)
L Speaker – left channel
R Speaker – right channel
P Passive radiator
E LED effect
H BT speaker carrying loop
M Microphone
Z BT speaker feet
EN - 4
PUTTING INTO OPERATION
Before first use, be sure to read the safety instructions contained in this
user's manual carefully.
Before first use, please charge the BT speaker to a maximum level. Hold
down the power on button to turn on the BT speaker. Turning on/off is
indicated by a sound signal. To turn the BT speaker off, hold down the
power on button.
Attention: After a longer period of inactivity, the appliance will turns itself
off.
PAIRING DEVICES VIA BLUETOOTH
Turn on the BT speaker and search for its Bluetooth name “SIRIUS 2
MINI” in the device to be paired, then start the pairing process. If you are
requested to enter a pairing code while your device and the BT speaker
are pairing, use the code: “0000”. To disconnect a paired device, end the
pairing session on your mobile device or briefly press the “On/Off” button
twice. Disconnection will be indicated by a “disconnected” voice signal.
Note: To ensure a stable Bluetooth connection, make sure that the
distance between the BT speaker and your connected device is kept within
10 meters.
EN - 5
Attention: Some connected devices support common volume setting.
If some of the connected devices do not support this feature, the volume
setting will operate separately on each device.
TWS FEATURE
If you purchase another SIRIUS 2 MINI series speaker (SIRIUS 2,
SIRIUS 2 MAXI), you can pair them together for stereo sound. First,
make sure your device is not connected to any BT speaker. Switch on
both BT speakers, press and hold the PLAY/PAUSE/TWS button (this
will be accompanied by an acoustic signal) and wait until the speakers
automatically pair together. Successful pairing will also be accompanied by
an acoustic signal. Then connect your mobile device to the BT speaker.
Changing the volume level using the volume control buttons will take effect
automatically on both paired BT speakers. Pressing and holding the Power
On button on one of the speakers will turn both paired speakers off. To
exit TWS mode, hold down the PLAY/PAUSE/TWS button on one of the
participating BT speakers until an acoustic signal sounds.
RECOMMENDATION: For optimal stereo sound, we recommend always
pairing the same BT speaker types (SIRIUS 2 MINI with SIRIUS 2 MINI;
SIRIUS 2 with SIRIUS 2; SIRIUS 2 MAXI with SIRIUS 2 MAXI).
Warning: The TWS feature is only available in the Bluetooth mode. It is
not possible to pair the device with another type of BT speaker with TWS
function, even within re-editions of products with a different name than
(SIRIUS 2 MINI, SIRIUS 2, SIRIUS 2 MAXI).
EN - 6
AUDIO AUX IN
The BT speaker is equipped with a 3.5mm jack. Your device can be
connected to a BT speaker using an audio cable. First connect the audio
plug to your device and then to the BT speaker’s jack.
Please note: before connecting your device and BT speaker, make sure
that the output signal from your device is at the minimum level (minimum
output volume). This will prevent the BT speaker from damage. When
the audio cable is connected, the BT speaker does not meet the water
ingression protection class.
Note: In this mode, not all functions of the BT speaker are available. The
Bluetooth function is not active if the audio jack is connected to the BT
speaker.
PLAY/PAUSE BUTTON
● PressthePlay/Pausebuttontostartorpausemusicplaybackduring
Bluetooth connection or when the memory card is inserted.
● AnincomingcalltoapairedBluetooth-connecteddevicewillbe
announced with “incomming call” message and the music will be
interrupted. To answer/hang up an incoming call, press the Play/Pause
button briefly. Long press the Play/Pause button to reject an incoming
call.
EN - 7
Note: Microphone reception in the BT speaker may be attenuated due
to the waterproof nature of the device. To improve reception, turn the BT
speaker microphone (“M” in the main picture) towards you and speak
loudly near the BT speaker.
VOLUME AND TRACK PLAYBACK CONTROL
To control the BT speaker’s volume (+/- buttons), use the buttons on the
BT speaker. During music playback, you can press and hold the “+” button
to jump to the next track playback. To select the previous track, press and
hold the “-” button.
TURNING OFF BT SPEAKER NOTIFICATIONS AND
ALERTS
By pressing and holding the volume down and volume up buttons
together for 3 seconds, you can turn the BT speaker's notification and
alert messages off or on. The mode change will be accompanied by an
acoustic tone. When turned off and on, the BT speaker will remember the
last selected mode.
Caution: in the off state, no messages notifying about the BT speaker
state will be shown. Charge the BT speaker as a preventive measure.
Avoid using the sound at a maximum level.
EN - 8
LIGHT EFFECTS
The BT speaker is equipped with a light effect on the top. The light effect is
switched on/off/changed by briefly pressing the volume down and volume
up buttons simultaneously.
If you decrease or increase the volume while music is playing, a light effect
will indicate the volume level by colour.
RESET BUTTON
To reset the BT speaker, use a blunt, non-metallic object with a diameter
of 3 mm and carefully insert it into the AUX-IN connector. Gently press into
the connector until you feel the click of the button located behind the AUX-
IN connector. Then switch on the BT speaker using the power button.
RECOMMENDATION: If there is an unexpected problem with the BT
speaker connection or its functions. Reset the BT speaker.
MEMORY CARD PLAYBACK
Insert the memory card with the contacts facing the USB-C charging
connector. When the memory card is inserted, the BT speaker will
automatically play the contents of the memory card. If there is no file to
play on the memory card, the BT speaker will switch to the Bluetooth
mode. To release the TF memory card, press it gently into the BT speaker
EN - 9
with your fingernail or a blunt instrument and the card will release.
Then you can carefully remove it with your fingernails (or with tweezers).
Supported playback formats are listed in the technical specification.
Attention: Due to a number of devices on the market, compatibility and
playback support are not guaranteed for all media. The memory devices
you want to connect should be tested in advance and/or formatted as
FAT32. The playback of protected media, files or content stored inside
them may fail.
CHARGING THE BT SPEAKER
A charged battery provides power for several hours of operation at normal
volume levels. A high volume consumes more battery power; therefore, we
recommend listening at normal volume levels. To charge the BT speaker,
plug your charging adapter into the mains and then into the BT speaker.
A low battery level will be indicated by an audible alert. At the first sign of
a low battery, connect your rechargeable adapter. The charging process
will be indicated by an orange LED until the battery is de-energized or fully
charged.
Attention: For charging, use only the original accessories supplied
with the appliance. To achieve the maximum battery lifetime, it is best
not to start charging until the low battery audible alert is output. Charge
continuously until fully charged. When the battery operating time becomes
very short, the battery lifetime has been used up; we recommend that you
have the battery replaced at your authorized centre.
EN - 10
Recommendation: If the unit is not to be used for an extended period of
time, we recommend to fully charge the battery once every two to three
months. We recommend to store the unit with a the battery charged to
prevent irreparable damage to the battery (loss of capacity). For optimal
charging, use a 5V 2A charging adapter.
INGRESSION PROTECTION (IPX7)
The unit is resistant against water thus allowing you to listen to your
music in bath, shower, on the beach or by the pool. IPX7 water resistance
guarantees the unit’s function with slight splashing or immersing in water
1 m deep for up to 30 minutes. Full immersion is not recommended
because of possible loss of the audio playback signal.
Warning: Always remember to seal the BT speaker inputs (No. 5–8 in the
picture “BT speaker description”) with the original gasket and make sure
that the gasket is not damaged. Never charge the unit during possible
contact with fluids. The unit is designed for contact with clean water
only without any additives. Avoid exposing the unit to contaminated or
industrially treated fluids (such as lemonade, sea/salt water, oils, etc.).
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Sencor Altoparlanti
Sencor
Sencor SSS 6800 TE Manuale utente
Sencor
Sencor SSS 6700 NYX MAXI Manuale utente
Sencor
Sencor SSS 3600 KIDS Manuale utente
Sencor
Sencor Imperial BTS 600 Manuale utente
Sencor
Sencor SSS 5100 DOMUS Manuale utente
Sencor
Sencor SSS 3000 Manuale utente
Sencor
Sencor SSS 6701 Manuale utente
Sencor
Sencor SMC BS30 Manuale utente
Sencor
Sencor SSS 6603 HYPE L SE Manuale utente
Sencor
Sencor SSS 6400N TE SIRIUS Manuale utente
