SEWOO SLK-TL100 Manuale utente

Aroot Co., Ltd.

28-6, Gajangsaneopdong-ro, Osan-si, Gyeonggi- do, 18103, Republic of Korea

TEL : +82-31-8077-5000 / FAX : +82-31-624-5310

http://www.miniprinter.com

TL100 ENG Rev D 01/2021

All speci cations are subject to change without notice

MODEL : SLK-TL100

Receipt Printer User’s Manual

This device co mplies with part 15 of the FCC Rules.

Operation is subject to the following two conditions.

1) This device may not cause harmful interference, and

2) This device must accept any interference received,

including interference that may cause undesired operation.

Vic Barczyk

19700 S Vermont Ave Ste 200 Torrance, CA 90502 | USA

sales@miniprinter.com

Henning Mahlstedt

26188 Edewecht, Holljestr.9 | Germany

europe@miniprinter.com

Victor Almazan

Paseo de la Reforma No. 265 Piso 2.Ocina SBC. Col.

Cuauhtémoc, C.P. 06500 Ciudad de Mexico | Mexico

sales@miniprinter.com

Yan xiao rui

Room 902, No. 7, Lane 118, Xiaojishan Road, Sheshan Town,

Songjiang District, Shanghai | China

sales@miniprinter.com

Disposal of Old Electrical&Electronic Equipment(Applicable in the European Union and other

European countries with separate collection systems)

This symbol on the product or on its packaging indicates that this product shall not be treated as household

waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and

electronics equipment. For more detailed information about recycling of this product, please contact your

local city oce, your household waste disposal service or the shop where you purchased the product.

Table of Contents

1. Parts Identications 5

2. Setting up the printer 6

2.1 Unpacking 6

2.2 Connecting the cables 7

2.3 Loading the Roll Paper 10

3. Control panel and other functions 13

3.1 Control panel 13

3.2 Error Indicators 13

4. Self Test 14

5. ASCII Print 15

6. Select Baudrate Mode 15

7. Hexadecimal Dump 16

8. Printer cleaning 17

9. Specications 18

9.1. General Specications 18

9.2. Auto Cutter Specications 20

9.3. Interface 20

9.4. Electrical Characteristics 20

9.5. Environmental Requirements 21

9.6. Reliability 21

9.7. Certication 21

10. Command List 22

11. Utilities 24

12. S/W 25

1. Parts Identications

Features LED indicators

to indicate printer status

and switches to operate

the printer.

CONTROL LABEL

Open this cover to load

or replace paper.

TOP COVER

Used to turn on/o

power to the printer

POWER SWITCH

INTERFACE

CONNECTOR(SERIAL)

INTERFACE

CONNECTOR(USB)

PERIPHERAL DRIVE

CONNECTOR

POWER CONNECTOR

2. Setting Up the Printer

2-1. Unpacking

Your printer box should include these items. If any items are damaged or missing,

please contact your dealer for assistance.

The Printer CD Roll Paper

Adaptor(Optional) Interface Cable(optional)

2-2. Connecting the Cables

You can connect up the cables required for printing to the printer.

They all connect to the connector panel on the back of the printer, which is shown below :

INTERFACE

CONNECTOR(SERIAL)

PERIPHERAL DRIVE

CONNECTOR

POWER CONNECTOR

For connection to a host

computer.

For connection to a host

computer.

For connection of the AC

adapter. Never unplug

the AC adapter while the

printer is on.

Connects to peripheral units

such as cash drawers, etc.

Do not connect this to a

telephone.

INTERFACE

CONNECTOR(USB)

Before connecting any of the cables, make sure that both the printer and the com-

puter are turned o.

2-2-1. Interface Connector

9 Pin Serial

Serial Interface

PIN SIGNAL I/O DESCRIPTION

2RxD Input Printer transmit data line RS-232C level

3TxD Output Printer receive data line RS-232C level

4, 7 DTR Output Printer handshake to host line RS-232C level

5GND -System Ground

6DSR Input Data Send Ready

1, 8, 9 NC - -

4 3

USB “B” TYPE

USB Interface

PIN SIGNAL I/O Description

1+5V -+5V

2DATA- -Printer transmit data line

3DATA+ -Printer transmit data line

4GND -System Ground

2-2-2. Cash Drawer Connector

The printer can operate two cash drawers with a 6 pin RJ-11 modular connector.

The driver is capable of supplying a maximum current of 0.1A for 510ms or less

when not printing.

PIN SIGNAL Description

1Signal GND -

2Drawer kick-out drive signal 1 Output

3Drawer open/close signal Input

4+24V -

5Drawer kick-out drive signal 2 Output

6Signal GND -

Altri manuali per SLK-TL100

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali SEWOO Stampante

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente