SIERA.AI S2 Manuale utente
S2 USER MANUAL
Getting started with S2
For Support reach us at
P: +1 (512) 817 0702 | E: [email protected] | Hours: M-F 9am - 6pm US CST
COPYRIGHT 2021. STOCKED ROBOTICS, INC D/B/A SIERA.AI
Index
1. Inside the S2 Box
1.1 List of Components
2. Quick Setup | Assigning S2 to a vehicle
2.1 S2 Setup
2.2 Perform Inspection
3. Administrator Tools
3.1 Accessing the Admin Menu
3.2 Change the assigned worksite
3.3 Change the assigned asset
3.4 Language Selection
3.5 Primary Input Selection
3.6 Software Updates
4. Operator Tools
4.1 Start/End Shift
4.2 Terminate an Inspection
4.3 Language Selection
4.4 User Profile
COPYRIGHT 2021. STOCKED ROBOTICS, INC D/B/A SIERA.AI
Index
5. Mounting S2 on the asset
5.1 General requirements
5.2 Types of S2 mounts & requirements
5.2.1 Post Clamp mount
5.2.2 Rod Clamp mount
5.2.3 Accessory Bar
5.2.4 Magnetic mount
5.2.5 Safety cable
6. Setting Up a SIERA.AI Account
6.1 Creating a SIERA.AI account
6.2 Self-Onboarding
6.2.1 Setting up company information
6.2.2 Adding your worksites
6.2.3 Adding your users
6.2.4 Adding your asset types
6.2.5 Adding your inspection checklists
6.2.6 Adding your assets
6.2.7 Mapping checklists to assets
COPYRIGHT 2021. STOCKED ROBOTICS, INC D/B/A SIERA.AI
1. Inside the S2 Box
1.1 You will find the following components inside the S2 box
Touchscreen with Locking Mount
The Locking Mount securely holds
the Touchscreen and gives the
ability to mount to Adjustment Arm
x1
Adjustment Arm
The Adjustment Arm connects the
Touchscreen Locking Mount to the
selected Mount Ball. It gives full
adjustment freedom.
x1
Accessory Bar Mount Ball
Mount Ball that mounts securely to
vehicle Accessory Bar (if available).
x1
COPYRIGHT 2021. STOCKED ROBOTICS, INC D/B/A SIERA.AI
Post Clamp Mount Ball
Mounts securely to flat posts up to 3”
wide.
X1 (standard clamp option)
Rod Clamp Mount Ball
Mounts securely onto round rods
using either a hose clamp or U-bolt.
X1 (optional depending on
vehicle type)
Safety Cable & Padlock
Secures the Touchscreen to the
vehicle body when paired with
Padlock
X1 (optional)
COPYRIGHT 2021. STOCKED ROBOTICS, INC D/B/A SIERA.AI
2. Quick Setup | Assigning S2 to a vehicle
8.4” Touchscreen
2.1.1 Press the power button on the
touch device and let it boot up. As
the S2 software starts you would see
the following screen
POWER BUTTON
COPYRIGHT 2021. STOCKED ROBOTICS, INC D/B/A SIERA.AI
2. Quick Setup | Assigning S2 to a vehicle
2.1.2 An administrator authorization is
required here. You can authorize with
your login credentials or you can
also scan your dedicated user QR
code.
If you do not have a SIERA.AI account
yet, please refer to section 6 of the
manual, on how to create and setup
your account.
USER CREDENTIALS
USER QR CODE
COPYRIGHT 2021. STOCKED ROBOTICS, INC D/B/A SIERA.AI
2. Quick Setup | Assigning S2 to a vehicle
2.1.3 After administrator
authorization, you will see the
Worksite selection page.
Select the worksite in which this
vehicle will be operating. If you have
a large list of worksites, you can
search for the specific worksite
SEARCH A WORKSITE
COPYRIGHT 2021. STOCKED ROBOTICS, INC D/B/A SIERA.AI
2. Quick Setup | Assigning S2 to a vehicle
2.1.4 Now choose the vehicle on
which you want to assign the S2
touchscreen.
If you have a large list of vehicles,
you can search for the specific
vehicle. Or if you’re in front of your
vehicle, you can directly scan the QR
code of the vehicle.
The vehicle QR code can be retrieved
from your SIERA.AI account under
Management > Assets
SEARCH AN ASSET
SCAN VEHICLE QR CODE
COPYRIGHT 2021. STOCKED ROBOTICS, INC D/B/A SIERA.AI
2. Quick Setup | Assigning S2 to a vehicle
2.1.5 Confirm your selection, and it’s
done!
The touchscreen is configured and
you can now mount the device on
the assigned vehicle.
Indice
Altri manuali SIERA.AI Sistema di visione artificiale
