SIERA.AI S3 Manuale utente
Outline
1. Introduction
2. Installation
© SIERA.AI 2021
3. Using S3
SIERA.AI Safety System S3
What is S3?
INTRODUCTION
© SIERA.AI 2021
Gateway Sensor Power Harness
© SIERA.AI 2021
Components
INTRODUCTION
The gateway is mounted
to the vehicle using a
clamp and adjustment
arm seen above.
Gateway
INSTALLATION
© SIERA.AI 2021
The sensor is mounted
using a similar clamp to
the gateway and can be
adjusted using the
mounting arm and the key
(seen below).
Sensor
INSTALLATION
© SIERA.AI 2021
Warning: The sensor should be
mounted in a safe spot that is out
of the way of any moving parts and
protected from external impact.
Orientation/Calibration
© SIERA.AI 2021
Power Harness
INSTALLATION
© SIERA.AI 2021
Warning: The system is only compatible with lifts that have
either a 12 or 24 volt battery. For 36V-60V batteries please use
the provided DC-DC converter. For higher than 60V batteries
please contact us for support.
Harnessing Connections
© SIERA.AI 2021
Power
Connection
Sensor
Connections
INSTALLATION
An administrator authorization is
required here. You can authorize with
your login credentials or you can
also scan your dedicated user QR
code. After login, select the worksite
and asset for this device.
Note: If you do not have a SIERA.AI
account, please contact your customer
success representative.
USER CREDENTIALS
USER QR CODE
Assign S3 to an Asset
Setup
Indice
Altri manuali SIERA.AI Sistema di visione artificiale
