SIGMA TEK VA 011 Manuale utente

VA 011

VARAN Analyzer

Technical Manual

Date of creation: 07.08.2019

Version date: 04.11.2020

Article number: 20-027-011-E

Publisher: SIGMATEK GmbH & Co KG

A-5112 Lamprechtshausen

Tel.: +43/6274/4321

Fax: +43/6274/4321-18

Email: [email protected]

WWW.SIGMATEK-AUTOMATION.COM

SIGMATEK GmbH & Co KG

Translation from German

tributed in any form (print, photocopy, microfilm or in any other process) without express permission.

We reserve the right to make changes in the content without notice. SIGMATEK GmbH & Co KG is not responsible for

technical or printing errors in this handbook and assumes no responsibility for damages that occur through its use.

VARAN ANALYZER VA 011

04.11.2020 Page 1

S-DIAS VARAN Analyzer VA 011

with 1 VARAN In

1 VARAN Out

1 Ethernet

The VA 011 S-DIAS VARAN Analyzer module allows the analy-

sis of communication in a real-time Ethernet VARAN bus net-

work. The connection is made over a free VARAN port. If no port

is available, an existing VARAN bus connection can simply be

removed and the VARAN Analyzer inserted. The data to analyze

are output through a Gigabit Ethernet port and can be evaluated

with the VARAN Service Tool. The option is also available to an-

alyze the data via Wireshark and protocol plug-in from

SIGMATEK.

VA 011 VARAN ANALYZER 
 
Page 2 04.11.2020 
Contents 
1Introduction............................................................................. 4 
1.1 Target Group/Purpose of this Manual ........................................4 
1.2 Important Reference Documentation .........................................4 
1.3 Contents of Delivery.....................................................................4 
2Basic Safety Guidelines......................................................... 5 
2.1 Symbols Used...............................................................................5 
2.2 Disclaimer......................................................................................6 
2.3 General Safety Guidelines...........................................................7 
3Residual Risks ........................................................................ 8 
3.1 Guidelines......................................................................................8 
3.1.1 EU Declaration of Conformity..............................................................8 
4Technical Data ........................................................................ 9 
4.1 Performance Data.........................................................................9 
4.2 Electrical Requirements...............................................................9 
4.3 Environmental Conditions.........................................................10 
4.4 Miscellaneous .............................................................................10 
5Mechanical Dimensions........................................................11
6ESD Protection.......................................................................12 
7Connector Layout..................................................................13 
7.1 Status LEDs.................................................................................14 

 VARAN ANALYZER VA 011 
 
11.2020 Page 3 
2 Button ..........................................................................................15 
3 Applicable Connectors...............................................................17 
4 Labeling Field..............................................................................18 
8Strain Relief ...........................................................................19 
1 Wiring from the Control Cabinet to an External VARAN 
Component..................................................................................21 
2 Wiring Outside of the Control Cabinet .....................................22 
3 Shielding for Wiring Within the Control Cabinet .....................23 
4 Connecting Noise Generating Components............................24 
5 Shielding Between Two Control Cabinets ...............................25 
Transport/Storage.................................................................26 
Mounting................................................................................27 
Maintenance...........................................................................29 
1 Maintenance ................................................................................29 
2 Repair...........................................................................................29 
Disposal .................................................................................30
Application Information........................................................31 
1 IP Settings ...................................................................................31 
2 Analysis with the VARAN Service Tool....................................33 
3 Installation and Analysis with Wireshark.................................34 
4 Example application ...................................................................36 

VA 011 VARAN ANALYZER

Page 4 04.11.2020

1 Introduction

1.1 Target Group/Purpose of this Manual

This manual contains all information required for operating the VA 011.

This manual is intended for:

•Project planners

•Technicians

•Commissioning engineers

•Machine operators

•Maintenance/test technicians

General knowledge of automation technology is required.

Further help and training information, as well as the appropriate accessories can be found on

our website www.sigmatek-automation.com

Our support team is happily available to answer your questions.

Please see our website for our hotline number and business hours.

1.2 Important Reference Documentation

•Design specification VARAN

These documents can be downloaded from our website or obtained through SIGMATEK Sup-

port.

1.3 Contents of Delivery

1x VA 011

1x opposing connector

This document can be downloaded from our website.

Additional documents may be included with delivery.

VARAN ANALYZER VA 011

04.11.2020 Page 5

2 Basic Safety Guidelines

2.1 Symbols Used

The following symbols are used in the operator documentation for warning and danger mes-

sages, as well as informational notes:

DANGER

Identifies an immediate danger with high risk, which will lead to immediate

death or serious injury if not avoided.

WARNING

Identifies a possible danger with a mid-level risk, which can lead to death or

(serious) injury if not avoided.

CAUTION

Identifies a low risk danger, which can lead to injury or property damage if

not avoided.

Provides user tips, informs of special features and identifies especially im-

portant information in the text.

Danger for ESD-sensitive components

VA 011 VARAN ANALYZER

Page 6 04.11.2020

2.2 Disclaimer

The contents of this document were prepared with the greatest care. How-

ever, deviations cannot be ruled out. This document is regularly checked and

required corrections are included in the subsequent versions. The machine

manufacturer is responsible for the proper assembly, as well as device con-

figuration. The machine operator is responsible for safe handling, as well as

proper operation.

The current document can be found on our website. If necessary, contact our

support.

Subject to technical changes,which improve the performance of the devices.

The following documentation is purely a product description. It does not guar-

antee properties under the warranty.

Please thoroughly read the corresponding data sheets, operating instructions

and this system handbook before handling a product.

SIGMATEK GmbH & Co KG is not liable for damages caused through

non-compliance with these instructions or applicable regulations.

The general and special safety instructions described in the following sec-

tions, as well as technical regulations, must therefore be observed.

VARAN ANALYZER VA 011

04.11.2020 Page 7

2.3 General Safety Guidelines

According to EU Guidelines, the operating instructions are a component of a

product.

This manual must therefore be accessible in the vicinity of the machine since

it contains important instructions.

This technical documentation should beincluded in the sale, rental or transfer

of the product, or its online availability indicated.

Maintain this manual in readable condition and keep it accessible for refer-

ence.

Operate the unit with devices and accessories approved by SIGMATEK only.

CAUTION

Handle the device with care and do not drop or let fall.

Prevent foreign bodies and fluids from entering the device.

The device must not be opened, otherwise it could be damaged!

VA 011 VARAN ANALYZER

Page 8 04.11.2020

3 Residual Risks

3.1 Guidelines

The panel was constructed in compliance with European Union guidelines.

3.1.1 EU Declaration of Conformity

CE Declaration of Conformity

The VA 011 conforms to the following European guidelines:

•2014/35/EU Low-voltage guideline

•2014/30/EU “Electromagnetic Compatibility” (EMC guideline)

•2011/65/EU “Restricted use of certain hazardous substances in

electrical and electronic equipment” (RoHS Guideline)

The EU Conformity Declarations are provided on the SIGMATEK website.

See Products/Downloads or use the search function and the keyword “EU

Declaration of Conformity”.

Indice

Altri manuali SIGMA TEK Strumento di misura

SIGMA TEK

SIGMA TEK TS 041 Manuale utente

Manuali Strumento di misura popolari di altre marche

Suaoki

Suaoki D40 Manuale utente

Elster

Elster BK-G1.6 Manuale utente

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuale

Duratool

Duratool D03128 Manuale utente

Vega

Vega VEGAPULS 65 Manuale utente

Tonghui

Tonghui TH2618B Manuale utente

Tenmars

Tenmars TM-801 Manuale utente

MSR

MSR 145 Manuale utente

TPS

TPS WP-82 Manuale utente

ELMETRON

ELMETRON CP-511 Manuale utente

PCB Piezotronics

PCB Piezotronics 003C30 Manuale utente

Tenma

Tenma 72-10465 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Specifiche tecniche

Siemens

Siemens SITRANS F Coriolis FCT030 Manuale elenco delle parti

KLINGER

KLINGER CMF V Series Manuale utente

EXFO

EXFO FTB-2 Manuale operativo e di manutenzione

Keysight

Keysight M8290A Manuale utente

ADTEK

ADTEK MW-5 Manuale utente