SMC Networks EZ Connect Manuale utente

User Guide

SMC2652W

EZ Connect

Wireless Access Point

uProtocol-independent networking functionality

u11 Mbps data rate per channel: provides alternative

for wired LANs that can dramatically cut costs

uCoverage area 100ft at 11 Mbps, 1500ft at

5.5 Mbps or lower.

uSeamless connectivity to wired Ethernet LANs

augments existing networks quickly and easily

uDirect Sequence Spread-Spectrum (DSSS)

technology provides robust, and secure wireless

connection

uEasy installation

uOmni-directional antenna

Information furnished by SMC Networks, Inc.

(SMC) is believed to be accurate and reliable.

However, no responsibility is assumed by SMC for

its use, nor for any infringements of patents or

other rights of third parties which may result from

its use. No license is granted by implication or

otherwise under any patent or patent rights of

SMC. SMC reserves the right to change

specifications at any time without notice.

SMC Networks, Inc.

Irvine, California.

Trademarks

SMC is a registered trademark; and EZ Connect

and EZ Hub are trademarks of SMC Networks, Inc.

Other product and company names are trademarks

or registered trademarks of their respective

holders.

Limited Lifetime Warranty

Complete warranty information for all SMC

products is available on SMCs Web site at www.

smc.com.

THE EZ CONNECT

WIRELESS ACCESS

POINT

SMC2652W

SMCs EZ Connect Wireless Access Point is an 11

Mbps wireless repeater that seamlessly integrates

with existing Ethernet networks to support

applications such as mobile users or temporary

con erences. This solution o ers ast, reliable

wireless connectivity with considerable cost

savings over wired LANs (which include long-term

maintenance overhead or cabling.) Just install

enough wireless access points to cover your

network area, plug wireless cards into your

notebooks or install wireless adapters into your

desktops, and start networking.

Using this device in conjunction with SMCs EZ

Connect Wireless PC Cards, you can create an

instant network that integrates seamlessly with 10

Mbps Ethernet LANs. Moreover, moving or

expanding your network is as easy as moving or

installing additional access points  no wires!

EZ CONNECT WIRELESS ACCESS POINT

Package Checklist

EZ Connect Wireless Access Point package

includes:

 1 EZ Connect Wireless Access Point

(SMC2652W)

 1 antenna (dipole, omni-directional)

 1 DC power adapter

 1 utility diskette

 This User Guide

Please register this product and upgrade product

warranty at www.smc.com.

Please in orm your dealer i there are any

incorrect, missing or damaged parts. I possible,

retain the carton, including the original packing

materials. Use them again to repack the product in

case there is a need to return it or repair.

Hardware Description

SMCs EZ Connect Wireless Access Point serves as

a Media Access Control (MAC) bridge between

your wired Local Area Network (LAN) and one or

more Wireless Local Area Networks (WLANs).

Just attach the access point anywhere along your

Ethernet LAN to provide wireless stations within

its area o coverage with transparent access to the

local wired and wireless LAN.

The EZ Connect Wireless Access Point supports

an 11 Mbps hal -duplex connection to Ethernet

networks or each active channel. It is ully

compliant with 2.4 GHz DSSS CSMA/CA wireless

networking as de ined in IEEE 802.11b, and 10

Mbps Ethernet as de ined in IEEE 802.3

EZ CONNECT WIRELESS ACCESS POINT

Applications

The EZ Connect Wireless products o er a ast,

reliable, cost-e ective solution or wireless client

access to the network in applications such as:

 Remote access to corporate network

information

E-mail, ile trans er and terminal emulation

 Difficult-to-wire environments

Historical or old buildings, asbestos

installations, and open areas where wiring is

di icult to employ

 Frequently changing environments

Retailers, manu acturers and banks who

requently rearrange the workplace and change

location

 Temporary LANs for special pro ects or peak

time

Trade shows, exhibitions and construction

sites which need temporary setup or a short

time period. Retailers, airline and shipping

companies who need additional workstations

or a peak period. Auditors who require

workgroups at customer sites.

 Access to databases for mobile workers

Doctors, nurses, retailers, white-collar workers

who need access to databases while being

mobile in the hospital, retail store or o ice

campus.

 SOHO (Small Office and Home Office)

users

SOHO users who need easy and quick

installation o a small computer network

unctions.

EZ CONNECT WIRELESS ACCESS POINT

LED Indicators

The EZ Connect Wireless Access Point includes

ive status LED indicators, as described in the

ollowing igure and table.

S stem Requirements

Be ore you install the EZ Connect Wireless Access

Point, be sure you can meet the ollowing

requirements:

 An A/C power outlet (100~240V, 50~60Hz)

which will supply power or the access point

 An available RJ-45 (UTP) port on a 10BASE-T

Ethernet hub or switch.

 802.11 compliant wireless ethernet adapters

with TCP/IP compatible protocol installed.

 Web Browser or con iguration.

Ethernet

Link

Ethernet

Activity

Wireless

Activity

Wireless

Link

Power

DELsutatSnoitpircseD

rewoPdeRnOgniebsirewoptahtsetacidnI.deilppus

tenrehtE

kniL

nOneerG.knilelbactenrehtEdilavasetacidnI

tenrehtE

tivitcA

gnihsalF

wolleY

sitniopsseccaehttahtsetacidnI

01ehtnoatadgniviecerrognittimsnart

.NALtenrehtEspbm

sseleriW

noitatS

kniL

gnihsalF

neerG

ehT.sknilnoitatssseleriwdilavsetacidnI

ehthtiwsesaercnignihsalffoetar

.sknilforebmun

sseleriW

tivitcA

gnihsalF

wolleY

sitniopsseccaehttahtsetacidnI

hguorhtatadgnitimsnartrogniviecer

.sknilsseleriw

EZ CONNECT WIRELESS ACCESS POINT

INSTALLATION

1. Select the Site - Choose a proper place or

your SMC2652W Access Point. In general, the

best location to place the access point is at the

center o your wireless coverage area, within

line o sight to all your mobile stations.

2. Attach the Antenna - Screw the antenna into

the antenna connector (ANT) on the back

panel. Proper placement will improve

per ormance. Try to place the access point in

a position that can best cover its BSS (re er to

page 13). Normally, the higher you place the

antenna, the better the per ormance.

3. Connect the Ethernet Cable - The SMC2652W

can be wired to a 10 BASE-T Ethernet with a

network device such as a hub or a switch.

Connect into the RJ-45 connector socket on

the back panel with category 3, 4 or 5 UTP

Ethernet cable and an RJ-45 connector.

4. Connect the Power Cable - Connect the

power adapter cable to the 9V DC power

Socket on the rear panel.

Warning: ONLY USE the power adapter

supplied with the SMC2652W.

Otherwise, the product may be

damaged.

Antenna Connector

RJ-45 Connector

Reset Button DC 9 Power Cable

RS-232 Port

EZ CONNECT WIRELESS ACCESS POINT

CONFIGURATION

Your SMC2652W is a Plug and Play device. This

means that you do not need to con igure it in

most cases.

I you are adding this device into an already

existing wireless network, or i you need to

con igure some advanced settings, ollow the

instructions below.

The diskette labeled Utility Diskette that comes

with the package contains a utility program or the

EZ Connect Wireless Access Point. Any updates

can be downloaded rom SMCs Web site at

http://www.smc.com.

Warning: Back up your utility diskette and use

the copy as the working diskette to

protect the original rom accidental

damage.

The SMC2652W can be con igured over an

Ethernet network using RJ-45 cable. You may

connect the SMC2652W to a network device such

as a hub or switch. Then, run the utility program,

and con igure the SMC2652W remotely as

described below.

Windows NT/95/98/2000 Installation

1. Insert the SMC2652W utility disk into the

loppy drive on your PC, and then enter the

ollowing command: A:\utility\setup.

Follow the on-screen instructions to install

the utility program.

2. When you run the installed utility, click on

AP and then select Scan rom the menu.

The program will then detect all the

SMC2652Ws wired to the Ethernet network.

EZ CONNECT WIRELESS ACCESS POINT

3. From the list o detected SMC2652Ws, select

and double click on the unit you want to

con igure. The web browser page will appear

as ollows::

4. Enter the user name default and password

WLAN_AP. This will take you to the

home page.

5. Click on AP In ormation MIB, AP Control

MIB, TCP/IP Settings, or Change

Password to select the page required.

The AP In ormation MIB screen displays the

categories o in ormation shown above.

EZ CONNECT WIRELESS ACCESS POINT

In the AP Control MIB page, set the parameters and

then click on Apply to implement the settings.

DS Channel - Set the channel number as the

operating radio channel.

Note: The availiable channel settings are

displayed to the right o the DS Channel

ield. Local regulations determine which

channels are availiable.

FCC/IC: 1-11, ETSI: 1-13, France: 10-13,

Spain: 10-11, MKK: 1-14.

SSID - This should be set to the same value as

other stations in your network. (De ault: WLAN)

RTS Threshold - Set the RTS Threshold to the

same as that used by other devices in your

network. (De ault: 2,305, which means Disabled)

Altri manuali per EZ Connect

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali SMC Networks Punto di accesso wireless

SMC Networks

SMC Networks EZ Connect SMC2655W Manuale utente

SMC Networks

SMC Networks ElliteConnect SMC2888W Manuale utente

SMC Networks

SMC Networks E21011 Manuale utente

SMC Networks

SMC Networks SMCWEB-N Manuale utente

SMC Networks

SMC Networks 2655W FICHE Manuale utente

SMC Networks

SMC Networks SMC2891W-AN Manuale utente

SMC Networks

SMC Networks 2552W-G FICHE Manuale utente

SMC Networks

SMC Networks WAP5110-L Manuale utente

SMC Networks

SMC Networks 2655W FICHE Manuale utente

SMC Networks

SMC Networks 2552W-G FICHE Guida all'installazione

SMC Networks

SMC Networks EliteConnect SMC2555W-AG2 Manuale utente

SMC Networks

SMC Networks EliteConnect SMC2586W-G Manuale utente

SMC Networks

SMC Networks SMCWEBT-G Manuale utente

SMC Networks

SMC Networks EliteConnect WAP5110 Manuale utente

SMC Networks

SMC Networks WTK-G - FICHE TECHNIQUE Guida all'installazione

SMC Networks

SMC Networks SMCDPCR-AP Manuale utente

SMC Networks

SMC Networks EliteConnect SMC2555W-AG Manuale utente

SMC Networks

SMC Networks SMC EZ Connect g SMCWTK-G Manuale utente

SMC Networks

SMC Networks EZ CONNECT SMC2755W Manuale utente

SMC Networks

SMC Networks WAP3110-L Manuale utente

SMC Networks

SMC Networks EZ Connect Turbo SMC2455W Manuale utente

SMC Networks

SMC Networks EliteConnect SMC2555W-AG Manuale utente

SMC Networks

SMC Networks EliteConnect SMC2891W-AG Manuale utente

SMC Networks

SMC Networks WAP5110 Manuale utente

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente