Sony TMS Guida all'installazione
Integrator Training
Digital Cinema Deployment
TMS Hardware Integrator Installation
Training Manual (CHIPS)
October 15
Integrator Training, UK
Confidential Digital Cinema Deployment 2 of 49
October 15
CHIPS Stand-Alone Integrator Installation Training (CHIPS)
Document History
The following table details the revision history for this document.
Date Description of Changes Author Issue /
Version
06/12/2010 Original Chris Mullins 1.0
24/10/2011 Revised Chris Mullins 2.0
07/02/2012 Revised Chris Mullins 4.0
10/02/2012 Revised Chris Mullins 5.0
05/04/2012 Revised – Drawings / Section 11.1 / minor changes Chris Mullins 6.0
13/07/2012 Revised – For new Server Image Andrew Buckland 7.0
23/07/2012 Revision Andrew Buckland 8.0
28/01/2013 Updated and edited Andrew Buckland 8.2
01/09/2015 Updated and edited Chris Mullins 8.4
Confidentiality
This document and any attachments have been prepared by Sony Professional Solutions Europe for the sole use
of integrator being trained. The contents are confidential and must not be communicated in whole or part to any
other party without the prior written approval of Sony.
© 2010 Sony Professional Solutions Europe. All rights reserved.
Integrator Training, UK
Confidential Digital Cinema Deployment 3 of 49
October 15
CHIPS Stand-Alone Integrator Installation Training (CHIPS)
Contents
TMS HARDWARE INTEGRATOR INSTALLATION TRAINING (CHIPS) 1
1SCHEMATICS 5
1.1CHIPS Rack Layout Description 5
1.1.1Rear connections of TMS Server 6
1.2Rack Layout Schematic 7
1.3Network Schematic 8
1.4Power and Control Schematic 9
2CHIPS POWER UP PROCEDURE 10
2.1IPMI Settings 11
3CHIPS POWER DOWN PROCEDURE 13
4USERNAMES AND PASSWORDS 14
5STANDARD IP ADDRESS SCHEMA 15
6CHIPS INITIAL CONFIGURATION 16
6.1TMS Server Configuration 16
6.1.1Basic OS Options 16
6.1.2Windows Activation 16
6.1.3Administrator Account Password 17
6.1.4TMS Server Network Settings 18
6.2Switch Configuration 21
6.3UPS Configuration 27
6.4Setting up the Library 28
6.5TMS Licensing 28
7TMS SOFTWARE CONFIGURATION 30
7.1Start/Restart TMS Service (if required) 30
7.1.1View TMS GUI on Web browser 30
7.2Log in Details 30
7.3Create an Auditorium 31
7.3.1Specific Settings for Doremi Servers 31
7.4Edit Cue Template Settings 32
8OTHER USEFUL TMS SETTINGS 34
8.1Configuration – Library Settings 34
8.1.1Ingest Settings 34
8.1.2Library Path 35
8.1.3External Device Path 36
8.2Configuration - SPL/Pack Settings 36
8.2.1Add Additional Pack Types 36
8.3Configuration - Schedule Settings 36
8.3.1Schedule Import 36
Integrator Training, UK
Confidential Digital Cinema Deployment 4 of 49
October 15
CHIPS Stand-Alone Integrator Installation Training (CHIPS)
8.4CineWatch Device Monitor Site Name Settings 37
8.5TMS Server Desktop Shortcuts 38
8.6Paragon ExtFS driver 39
8.6.1All NTP addresses 39
9PLEASE SET THE WINDOWS TIME SERVICE IS SET TO AUTOMATIC (DELAYED START).FINAL
TMS SERVER CONFIGURATION 39
9.1TMS Server Windows Login 40
9.2TMS Service is Running 40
9.3Windows Time Service is Running 40
9.4Firewall Settings 40
10SONY PROJECTOR PREPARATION FOR TMS 41
10.1Screen to Screen (S2S) Network Setup 41
10.2Screen to Screen Source Setup 41
10.3NTP Setup 41
10.4Network Setup 42
10.5SMSManager_custom.ini file change 42
11SMS-C CONFIGURATION 43
11.1Initial Login configuration 43
11.2SMS-C Folder setting on SMS-C 45
11.2.1SMS-C ‘Export’ Folder Settings 45
12TMS CLIENT WORKSTATION CONFIGURATION 46
12.1Hardware Setup 46
12.2General Setup 46
12.2.1Initial Windows Configuration 46
12.2.2Firewall Settings 46
12.2.3Software Prerequisites 47
12.3Network Setup 47
12.4NTP Client Setup 47
12.5SMSC Installation 47
12.5.1Initial Login configuration 47
12.6Create Shortcuts 48
13HARDWARE TEST PROCEDURES 48
Integrator Training, UK
Confidential Digital Cinema Deployment 5 of 49
October 15
CHIPS Stand-Alone Integrator Installation Training (CHIPS)
1 Schematics
Populate the pre-wired CHIPS rack using the following schematics.
1.1 CHIPS Rack Layout Description
UPS - Uninterruptable Power Supply that will power the CHIPS system in the event of
a power cut. The UPS will do a clean shutdown of the system when the battery level
goes below a determined level.
TMS SERVER - The TMS server is where the Theatre Management System (TMS)
software is installed. All ingests of DCPs go through the TMS server either through
USB, eSATA or network interfaces. The CineWatch application is also installed which
provides a system monitoring service over SNMP. It also provides an increased level
of support as Sony can monitor and access the system remotely (if VPN link is
available). Upgrades of the projector firmware/software can be done remotely using
CineWatch
Integrator Training, UK
Confidential Digital Cinema Deployment 6 of 49
October 15
CHIPS Stand-Alone Integrator Installation Training (CHIPS)
LIBRARY STORAGE - This is included in on board the TMS Server. The Library
Storage contains 8 x 2TB disks formatted to NTFS in a raid 6 configuration leaving
12TB useable space on the disk. Assuming a DCP feature size of 250GB this will
give storage for approximately 60 feature films (200GB DCP).
DCP HDD POWER AND USB DISTRIBUTION - A mains distribution panel is
provided so that a DCP HDD can be powered at the front of the rack. 4x USB ports
are available on the front of the TMS Application Server. Also KDM’s can be ingested
by USB memory stick.
CRU DATAPORT (High Speed Ingest) - The CRU Dataport provides increased
ingest speed through an eSATA interface to the Application Server. 2 x CRU DCP
HDD can be inserted, powered automatically and then ingested using the TMS Client.
KVM MONITOR/KEYBOARD DRAWER - The KVM monitor and keyboard is used for
configuration and maintenance of the system and can access both the Application
Server and the CineWatch Server. The KVM monitor is usually kept closed and not
used for daily use.
48 PORT Gb NETWORK SWITCH - The Gigabit switch is configured with a 4 x 1Gb
trunk to the Application Server for throughput and a single Gb link to each projector,
TMS Client and customer network.
TMS WORKSTATION - The TMS client PC is a standard PC which is not required to
be high performance. From this PC the TMS graphical user interface is accessed
through Windows Internet Explorer (or FireFox). The TMS Client is usually located in
the projection box and is the main point of interaction with the system. Scheduling,
Content Management, Status Monitoring and Show Management can be performed
at this terminal. A system can have multiple TMS Clients.
1.1.1 Rear connections of TMS Server
Figure 1 - Rear connections of TMS Server
Please note that the 4 network cables that form the 4Gb TMS trunk to the network
switch are all connected to the Network PCI card not the on board nics.
Integrator Training, UK
Confidential Digital Cinema Deployment 7 of 49
October 15
CHIPS Stand-Alone Integrator Installation Training (CHIPS)
1.2 Rack Layout Schematic
Integrator Training, UK
Confidential Digital Cinema Deployment 8 of 49
October 15
CHIPS Stand-Alone Integrator Installation Training (CHIPS)
1.3 Network Schematic
Integrator Training, UK
Confidential Digital Cinema Deployment 9 of 49
October 15
CHIPS Stand-Alone Integrator Installation Training (CHIPS)
1.4 Power and Control Schematic
Integrator Training, UK
Confidential Digital Cinema Deployment 10 of 49
October 15
CHIPS Stand-Alone Integrator Installation Training (CHIPS)
2 CHIPS Power Up Procedure
Before performing the power up procedure please confirm that all wiring is cabled as
per the network and control schematics
Connect power cable from the UPS to the mains power supply
The UPS cable has two connectors, a C19 16A rectangle connector that connects to
the UPS, and a European plug adapter that connects to the house power supply.
Since the rack only has two servers the standard house power supply will be
sufficient to power the equipment.
Turn on the UPS
Hold the ‘ON’ button on the UPS for 3 seconds to protect the load
Turn on the Supermicro TMS Server
Press the power switch on the front of the server.
UPS Cable
esc
ON Button
FRONT
UPS
House
Power
Supply
ON Button
Indice
Altri manuali Sony Server
Sony
Sony HDXS-C200 Manuale utente
Sony
Sony NSR 1050H - Standalone DVR - 16 CH Manuale utente
Sony
Sony MAV-2000 Manuale utente
Sony
Sony MAV-70 Manuale utente
Sony
Sony NSR Series Manuale utente
Sony
Sony FSV-VN7 Manuale utente
Sony
Sony VGF-HS1 - Vaio Home Server Manuale utente
Sony
Sony HCD-CZ1 - Amplifier, Cd Player Foglio di istruzioni
Sony
Sony Ipela SNT-EX101 Manuale utente
Sony
Sony NSR-500 Manuale utente
Sony
Sony MAV-70 Manuale utente
Sony
Sony VSR-2000 Manuale utente
Sony
Sony NSS-V2 Manuale utente
Sony
Sony VGF-HS1 - Vaio Home Server Manuale utente
Sony
Sony WG-C10 Series Guida di riferimento
Sony
Sony NSS-V2 Manuale utente
Sony
Sony WG-C10 Series Manuale utente
Sony
Sony NSR-500 Manuale utente
Sony
Sony Ipela NSR-1200 Manuale utente
Sony
Sony IPELA NSR Series Manuale utente
