SpectraLink DECT Server 2500 Manuale utente

14232905-IG, April 2019, Edition 2.0

Recovering Spectralink DECT Server

2500/8000

Below you will find information about:

lResetting the password to default to be able to enter the web based Administration Page of

the Spectralink DECT Server 2500/8000.

lDefault user name of the system is: admin

lDefault password of the system is: admin

lDiscovering the IP address of the server via CPU Card or handset service codes.

Note:

For information about installation and configuration of the Spectralink DECT Server

2500/8000, click the Help button in the web based Administration Page of the server.

14232905-IG, April 2019, Edition 2.0 2

Reset Password to Default Using Reset Button

You can restart the Spectralink DECT Server 2500/8000 and reset password to default by pressing

the Reset button (using a paper clip) on the CPU card. The CPU card resides to the far left side of

the cabinet.

Below you will find information about Reset button actions that can take place when you press it.

Reset button Action

Short press

(2 to 5 sec.)

The power LED flashes red.

System is only restarted. Web password and other settings are not reset.

Long press

(5 to 9 sec.)

The power LED flashes blue.

Resets the web password and some settings (depending on firmware version) to

default and restarts the system.

Caution:

When long pressing the Reset button, not only the web password is set to default.

The following settings will also be reset:

lTelnet port 10000, HTTP port 80

lEnable wildcard subscription

lEnable UPNP

lClear VLAN settings

lEMD (SIO) password.

lSIP and Media ports are set to default

All other configurations are not affected.

14232905-IG, April 2019, Edition 2.0 3

Reading IP Address

You can discover an IP address of a Spectralink DECT Server 2500/8000 either via the CPU card or

a service code entered in a subscribed Spectralink DECT Handset.

CPU Card

On the CPU card, the power LED is signalling the IP address of the relevant Spectralink DECT

Server 2500/8000 by means of a sequence of LED flashing different colors.

Below is an example of behavior for IP address 127.0.1.101

lLED steady green (“beginning of message”); LED off (break); LED flashes blue (ignore this)

lThe power LED morses the IP address. The morse cycle for the power LED is as follows:

Steady green 30 seconds, flashing blue 3 seconds ("get ready" sequence starts) Green flash

represents digits (zero is a long flash). Red flash means dot between digits.

lbreak, LED flashes green once (=”1”), break, LED flashes green twice (=”2”),

lbreak, LED flashes green 7 times (=”7”), break, LED flashes red (=”.”)

lbreak, LED flashes green once, longer (=”0”), break, LED flashes red (=”.”)

lbreak, LED flashes green once (=”1”), break, LED flashes red (=”.”)

lbreak, LED flashes green once (=”1”), break, LED flashes green once, longer (=”0”), break,

LED flashes green once (=”1”), break

lLED steady green (“end of message”)

Service Codes in Spectralink DECT Handset

From a subscribed Spectralink DECT Handset use the following service code to get the IP address

of the relevant Spectralink DECT Server: ***999*00 .

lEnter ***999*00 and press .

The IP address is displayed on the handset screen.

Altri manuali per DECT Server 2500

Questo manuale è adatto per i seguenti modelli

Altri manuali SpectraLink Server

SpectraLink

SpectraLink 80-Series Manuale utente

SpectraLink

SpectraLink IP-DECT SERVER 6500 Manuale dell'operatore

SpectraLink

SpectraLink KIRK 1500 Istruzioni per l'installazione

SpectraLink

SpectraLink IP-DECT 200 Manuale utente

SpectraLink

SpectraLink IP-DECT 200 Manuale utente

SpectraLink

SpectraLink IP-DECT SERVER 400 Manuale dell'operatore

SpectraLink

SpectraLink IP-DECT 200 Manuale utente

SpectraLink

SpectraLink IP-DECT 200 Manuale utente

SpectraLink

SpectraLink IP-DECT SERVER 400 Manuale utente

SpectraLink

SpectraLink NetLink SVP010 Guida rapida

SpectraLink

SpectraLink IP-DECT SERVER 400 Manuale dell'operatore

SpectraLink

SpectraLink NetLink SVP100 Guida rapida

SpectraLink

SpectraLink NetLink SVP100 Guida rapida

SpectraLink

SpectraLink NetLink SVP010 Manuale di servizio

SpectraLink

SpectraLink NetLink SVP100 Manuale di servizio

SpectraLink

SpectraLink IP-DECT SERVER 400 Guida di riferimento rapido

SpectraLink

SpectraLink IP-DECT 200 Manuale dell'operatore

SpectraLink

SpectraLink DECT Server 2500 Manuale utente

SpectraLink

SpectraLink IP-DECT 200 Manuale dell'operatore

SpectraLink

SpectraLink IP-DECT SERVER 400 Manuale utente

SpectraLink

SpectraLink IP-DECT 200 Manuale utente

SpectraLink

SpectraLink IP-DECT 200 Manuale utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente