4
unit
calibration
As the operator of this unit you require accurate, safe, and reliable equipment to
perform coating inspections at the proper output voltage.
Prior to leaving our manufacturing facility SPY Inspection Equipment certifies
that SPY®Model DCPJM DC Pocket JeepMeter (voltmeter) has been calibrated
and demonstrates an accuracy of (+/- 5%).
Your unit comes with a Factory Calibration Certificate Traceable to NIST and
a Factory Authorized Calibration Decal applied to the bottom of the unit both
with the date your unit was calibrated.
Our units do not tend to drift but it is recommended that this unit be calibrated
at least once per year or more frequently based on heavy usage. Recalibration
of our equipment should be performed ONLY at a SPY®Authorized Service
Center due to the unique calibration process, test equipment utilized and
properly trained SPY®technicians.
We DO NOT recommend using any other calibration service other than a SPY®
Authorized Service Center; using an outside service with technicians not trained
to work on SPY®brand equipment could damage the unit and if the enclosure is
opened will void the warranty.
When equipment service is needed please visit our Services & Repairs page on
spyinspect.com.
Fill out the online service form, submit, and then follow the instructions provided
in the confirmation email that is sent to you. Please check your spam folder if
you do not get the confirmation email. If you experience issues with the online
service form please call us at 713-681-5837 so we can assist you.
For International Customers we have Authorized Service Centers World Wide.
Please visit the Distributor Locator page on spyinspect.com to search for a local
SPY®Authorized Service Center in your area. If none, please see instructions
above to send to our SPY®Manufacturing Facility.
