Star Micronics SLIP SP298 SERIES Manuale utente

Altri manuali per SLIP SP298 SERIES

2

Indice

Altri manuali Star Micronics Stampante

Star Micronics

Star Micronics DP8340 Series Manuale utente

Star Micronics

Star Micronics LC-7211 Manuale utente

Star Micronics

Star Micronics TSP700II Series Manuale utente

Star Micronics

Star Micronics DP-8340 FM-120 Manuale utente

Star Micronics

Star Micronics Multi-Font XR-1000 Manuale utente

Star Micronics

Star Micronics TUP900 Series Manuale utente

Star Micronics

Star Micronics TSP2000 Series Manuale utente

Star Micronics

Star Micronics SLIP SP298 SERIES Manuale utente

Star Micronics

Star Micronics TSP800 Series Manuale utente

Star Micronics

Star Micronics TUP900 Series Manuale utente

Star Micronics

Star Micronics SF-10HA Manuale utente

Star Micronics

Star Micronics TSP700 Series Istruzioni per l'installazione

Star Micronics

Star Micronics LC24-15 Manuale utente

Star Micronics

Star Micronics LaserPrinter 4III Manuale utente

Star Micronics

Star Micronics SM-S200 Series Istruzioni per il montaggio

Star Micronics

Star Micronics LC-4511 Manuale utente

Star Micronics

Star Micronics WinType 800C Manuale utente

Star Micronics

Star Micronics TSP212 Manuale utente

Star Micronics

Star Micronics TSP143IIIBI Manuale utente

Star Micronics

Star Micronics NX-2460C Manuale utente

Star Micronics

Star Micronics AsuraCPRNT Manuale utente

Star Micronics

Star Micronics TSP700 Series Manuale operativo e di manutenzione

Star Micronics

Star Micronics Multi-Font NX-2410 Manuale utente

Star Micronics

Star Micronics TUP592 Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente

Removing the protective materials

Fourprotectivematerialsareinsertedintotheprintertoprotectcomponentsduring

shipping. Before using the printer, be sure to remove all protective materials as

shown in the illustration.

❏Remove the two pieces of protective tape.

❏Pull the protective sheet straight out toward the front of the printer.

❏Push in the side of the printer cover and lift it upward to remove it.

❏Remove the packing materials.

Note that it is a good idea to keep all protective materials in case you will need to

pack the printer up again and send it somewhere at a later date.

SP298 80871055

Printer cover

Packing

material

Protectivesheet

Protective tape

Protective tape

CAUTION

AutoSide Loading™

This printer is equipped with paper sensors, so you do not have to perform any

special procedure to align the location from which printing should start. Simply

insert the paper into the printer and the sensor locates the top of the paper. The

paper will be moved automatically into position for printing.

❏Make sure that the printer is plugged in and turned on.

❏Check that the RELEASE indicator on the control panel is lit. If the indicator is

not lit, press the RELEASE button until the indicator lights up.

❏Place a piece of the paper onto the printer's document table and slide its right

edge into the printer. Printing will be performed on the side of the paper that is

facing up (the one you can see), starting from the top of the paper.

Important!

•Do not use wrinkled or curled paper. In case of multiple paper, neatly align the

sheets.

•When inserting the paper into the printer, make sure that there are at least 3 cm

between the top edge of the paper and the print start position mark on the printer.

Otherwise the paper sensor may not be able to correctly locate the top of the

paper.

❏Push the right edge of the paper into the printer until it stops. At that time, the

PAPER OUT indicatorwillgoout,andtheprinter mechanism will automatically

align the paper for printing from the top.

❏Send data from your host computer to be printed on the paper.

At least 3cm

Print start position mark