STEINDORFF NYMCS-356 Manuale utente

STEINDORFF®

Digital LCD Stereo Zoom

Microscope

NYMCS-356

Operation Manual

To ensure safety and obtain optimum performance and familiarize yourself with the use of this microscope, we

recommend you read this manual before operating the microscope. Retain this instruction in an easily accessible

place near the microscope for further reference.

STEINDORFF®

Optical Microscope Part ………………………………………………………………………..

1. Structure and Characteristic …………………………………………………………

2. Main Technical Parameters …………………………………………………………..

3. Configuration ………………………………………………………………………….

4. Assembly ……………………………………………………………………………….

5. Operation ………………………………………………………………………………

6. Assembly and Usage of the Attachments …………………………………………….

7. Troubleshooting ……………………………………………………………………….

8. Maintenance …………………………………………………………………………...

Tablet Camera Part …………………………………………………………………………….

1. Parameters ……………………………………………………………………………...

2. Build-in Camera Specification ………………………………………………………...

3. Software Operation …………………………………………………………………….

CONTENTS

STEINDORFF®

This instruction manual is for NYMC-356 LCD digital Zoom Stereo Microscope, Please read the

instruction manual carefully before using, proper modification can be made without notice.

Please contact manufacturer if something unclear or incorrect is found.

The product you purchase may not include all the things mentioned in the manual.

Please operate the instrument as the instruction manual.

Safety problems have been fully considered when design, users may get hurt or instrument may get

damaged if improper operations are taken. For your safety, please read the instructions carefully before

using.

Warning

1. Specified use

The instrument can be used for micro observation only.

2. Do not take the microscope apart

As it will be damaged. Please contact manufacturer if the microscope does not work.

3. Make sure the input voltage

The correct input voltage is marked on the power supply of the illumination. Make sure the voltage in

your position is right. Improper input voltage may cause short circuit and fire. Please contact

manufacturer if you have any questions.

4. Power supply cord

Please turn off the power supply and pull out the cord when replacing the bulbs.

5. Temperature for illumination

The temperature will be high if the bulb is lightened. Do not put fiber, papers and inflammable things (eg.

Gasoline, aether, methanol and ethanol) close to the bulb.

Attention

1. Be careful when replacing the bulbs

The bulb will be heated after using. Replace the bulb when it has been cooling enough to avoid scald.

2. Check the illumination

Specific bulbs can be used. Bulbs with different specifications may cause damage to the instrument. Refer

to the manual for more information.

STEINDORFF®

1. Structure and Characteristic

1.1. Structure Chart

OPTICAL MICROSCOPE PART

Eyepiec

Eyepiece

Tube

Zoom Knob

Microscope Body

Focusing Knob

Switch

Brightness Adjusting Knob

Base

Zoom Tube Stapled

Zoom

Tube

STEINDORFF®

Binocular 45° Inclined

Tube

45°

Hex Wrench

Fix Working Stage

Hex Wrench

Adjust Height

Arm

Socket (Anti-static)

STEINDORFF®

1.2. Characteristic

1.2.1.Destaticization: stand, zoom tube, 10×eyepiece and auxiliary objective are all equipped with

destaticization. It is very helpful for users to observe the specimen with static (such as

semiconductor chip). When use this function, please connect the microscope to the ground

through the joggle on the back of the stand.

1.2.2.Airproof Function: zoom tube and 10x eyepiece are both equipped with airproof function,

and this ensures the instrument work properly when the humidity around is high.

1.2.3.Ergonomics design can make users feel comfortable after long-time operation.

1.2.4.High definition, broad wide field of view, long-distance work. Various attachments can be

added on this instrument. It can be widely used in such fields:

1.2.4.1. Can be used for training and education in school and research institute.

1.2.4.2. Can be used for routine inspection in medical institution.

1.2.4.3. Can be used for assemblage, testing, measuring and quality control in industry,

especially in IT.

1.2.5.Kinds of optional attachments (such as illumination, stand, eyepiece, objectives and etc.)

2. Main Technical Parameters

2.1. Technology Parameters

Zoom Ratio: 1:6.3

Magnification Range: 0.8x –5x

Interpupillary distance: 52mm –75mm

2.2. Technical parameters

Auxiliary

Objective

W.D.

(mm)

Eyepiece

10x

15x

20x

30x

Magnification

F.O.V

Magnification

F.O.V

Magnification

F.O.V

Magnification

F.O.V

115

8 –50x

27.5 –

4.4

12 –75x

20 –3.2

16 –100x

15.6 –

2.5

24 –150x

8.8 –

1.4

0.5x

211

4 –25x

55 –8.8

6 –37.5x

40 –6.4

8 –50x

31.2 - 5

12 –75x

17.6 –

2.8

43.5

16 –100x

13.8 –

2.2

24 –150x

10 –1.6

32 –200x

7.8 –1.3

48 –300x

4.4 –

0.7

STEINDORFF®

3. Configuration

Includes:

No.

Contents

Quantity

Tablet PC with digital camera

NYMCS-356 Zoom head

10x Eyepiece

Instruction Manual & Dust Cover

Microscope Stand (with or without illumination)

Optional Accessories

No.

Contents

15x Eyepiece

20x Eyepiece

30x Eyepiece

0.5x Auxiliary Objective

0.7x Auxiliary Objective

2x Auxiliary Objective

LED Circular Illumination (ring light)

Movable Stage

10x Division Eyepiece (eyepiece micrometer 0.1mm)

Stage Micrometer 0.1mm

Universal stand

Illumination ( Halogen )

0.4x reduce lens with C-mount for digital camera

DSLR Camera adapter (For Nikon/Canon DSLR cameras)

STEINDORFF®

4. Assembly

4.1. Assembly of the stage

Place the stand on a stable table, insert the stage into the base, and tighten the fixing screw with

wrench (small) attached at the back of the stand.

4.2. Lifting of the Focus Arm

The focus arm can be adjusted according to your special demands. Loosen the screw with the

wrench (big), and the arm will 55mm lower than before after re-mounting the focus arm.

Note: Before tightening the screw, make sure that the 2 pins on the arm fit into the grooves on

the vertical slider.

Notch / Concave

Positioning Knob

STEINDORFF®

4.3. Mount the Zoom head

Tighten the fixing screw of the zoom tube slightly to fix the zoom head on the stand.

Warning: Do not tighten the screw too tight as this will cause damage to the instrument.

4.4. Mount the Eyepiece

Rotate the eyepiece to 0, and insert the eyepiece into the tube completely till it touches the end of

the tube.

Note: when inserting the 10x eyepiece, make sure to touch the end of tube. When inserting or

extracting the eyepiece, please hold the cap instead of the diopter ring.

4.5. Wrenches are placed at the Back of the Stand.

STEINDORFF®

4.6. Image recording digital camera.

To satisfy your special requirements, different interfaces are supplied for your choosing, and this

will make your operation and observation more convenient.

4.6.1.Assembly of 0.4x reduce lens and the digital camera

Take away the dust-cover of the trinocular, insert one end of the 0.4x reduce lens into the

digital camera and tighten it. Insert the other end into the trinocular port, adjust the CCD,

and tighten it.

4.6.2.Assembly of the DSLR Camera Adapter and Digital SLR Camera

Take away the dust-cover, screw one end of the DSLR camera adapter into the DSLR

camera. Insert the other end of the camera adapter to the trinocular head, and tighten it.

Adjust the camera, and tighten it.

CCD

0.4x Reduce Lens

Set and lock screw

Screw

Digital camera

Relay Mirror

0.4x Reduce lens

Indice

Altri manuali STEINDORFF Microscopio

STEINDORFF

STEINDORFF S-VM300 Manuale utente

STEINDORFF

STEINDORFF CX SERIES Manuale utente

STEINDORFF

STEINDORFF NYMCS-320 Manuale utente

STEINDORFF

STEINDORFF NYMCS-620 Manuale utente

STEINDORFF

STEINDORFF NYMCS-1500 Manuale utente

STEINDORFF

STEINDORFF NYMCS-1262 Manuale utente

STEINDORFF

STEINDORFF S-1260 Manuale utente

STEINDORFF

STEINDORFF NYMCS-VM2000N Manuale utente

STEINDORFF

STEINDORFF NYMCS-237 Manuale utente

STEINDORFF

STEINDORFF NYMCS-VM400 Manuale utente

STEINDORFF

STEINDORFF NYMCS-212 Manuale utente

STEINDORFF

STEINDORFF CX50 Series Manuale utente

STEINDORFF

STEINDORFF NYMCS-310 Manuale utente

STEINDORFF

STEINDORFF NYMCS-290 Manuale utente

STEINDORFF

STEINDORFF NYMCS-931 Manuale utente

STEINDORFF

STEINDORFF S-271 Manuale utente

STEINDORFF

STEINDORFF NYMCS-342 Manuale utente

STEINDORFF

STEINDORFF NYMCS-1701 Manuale utente

STEINDORFF

STEINDORFF NYMCS-605 Manuale utente

STEINDORFF

STEINDORFF NYMCS-1290 Manuale utente

STEINDORFF

STEINDORFF NYMC0035000C Manuale utente

STEINDORFF

STEINDORFF NYMCS-615 Manuale utente

STEINDORFF

STEINDORFF NYMC38000 Manuale utente

STEINDORFF

STEINDORFF NYMCS-343 Manuale utente

Manuali Microscopio popolari di altre marche

Thermo Scientific

Thermo Scientific Nicolet iN10 Guida

National

National DC3-163 Manuale utente

KERN Optics

KERN Optics OPE-1 Manuale utente

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manuale utente

Prior

Prior Lux POL Manuale utente

Opitec

Opitec Smartscoop 115615 Manuale utente

KERN

KERN OPO-1 Manuale utente

Topcon

Topcon SP-1P Manuale utente

Motic

Motic PA43 Manuale utente

Leica

Leica DVM5000 Guida utente

MshOt

MshOt MZ62 Manuale utente

KERN Optics

KERN Optics OZR-5 Manuale utente

VWR

VWR VisiScope 384 Series Manuale utente

Nikon

Nikon ECLIPSE E200 POL Manuale utente

Leica

Leica DI C800 Manuale

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuale utente

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuale utente

Olympus

Olympus SZ61 Manuale utente