Stewart Filmscreen CM-1005 Manuale utente

TO THE INSTALLER: BE SURE TO LEAVE THIS MANUAL WITH THE OWNER.

VE-1005

Visionary

Electriscreen

To the Owner

Installation Instructions

Operating the Screen

Maintenance

OWNER’S MANUAL

Printed in U.S.A.

Stewart Filmscreen reserves the right to make changes to the product specified in this document.

From time to time, this document is updated. Current versions of documentation are posted on the Stewart Filmscreen website at

www.stewartfilm.com.

Contents

To the Owner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Preparing the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Step 1. Hanging the Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Step 2. Electrical Hook-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Step 3. Installing the Screen Assembly Into the Case . . . . . . 11

Operating the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Adjusting the Screen Extension . . . . . . . . . . . . . . . . . . . . . . . 13

Screen Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Visionary Electriscreen: Owner’s Manual 1

Visionary

Electriscreen

OWNER’S MANUAL

Congratulations on your purchase of the finest optical viewing screen

available anywhere in the world!

Please take a moment to review this manual, it will help ensure you many

years of trouble-free service from your new Stewart Filmscreen product.

About your Visionary Electriscreen

The Visionary Electriscreen is designed for ease of installation. The case

can be installed separately during construction, and the screen assembly is

then installed once the construction is completed. The Visionary features a

seamless, self-finishing face-plate and drywall stops to accommodate

various ceiling configurations.

Preparation

Specifications regarding the individual screen dimensions, weight, mounting

type, and controls are provided by the factory when the unit is ordered.

Before beginning the installation:

Check the specifications for the type of mounting and switch

control to be used.

Ensure that the mounting area and electrical connection are

prepared. Generally the switch control mechanism is placed near

the AV control system to facilitate maintenance of the controls.

Check the size and weight of the screen to be installed so that

you can plan for the number of people required for the mounting

procedure. You need at least two people to mount the smaller

screens; more are needed for larger, heavier screens.

2Stewart Filmscreen Corporation

TO THE OWNER

PREPARING THE INSTALLATION

Before proceeding with the installation of this screen,

be sure to read and understand all the installation and

operating instructions thoroughly.

All electrical wiring installations must conform to local

and national codes and should be performed by

qualified service personnel.

There are no user-serviceable parts contained within

the unit.

You will need:

Enough ladders for the personnel supporting the screen during

the mounting process

A level

Fasteners appropriate for the surface on which the screen is

being mounted (See instructions for the type of mount for

recommendations.)

A wrench (supplied)

Note: This manual refers to “AC” to represent electrical power. Your

location may use 120 V, 220 V, or other electrical power. Screen systems

are manufactured using the electrical power type specified for the location.

Use appropriate power sources for your location.

Unpacking

1. Remove the outer plastic covering and white wrapping paper

surrounding the screen case.

2. Do not remove the wrapping paper surrounding the screen roller.

You should remove it only after the unit is hung and all electrical

connections have been made.

Visionary Electriscreen: Owner’s Manual 3

Caution

During installation, do not place the unit on an unstable

cart, stand, table, or ladder. The unit may fall, causing injury

to a child or adult and damage to the unit.

4Stewart Filmscreen Corporation

Professional mounting techniques should be used. Stewart Filmscreen

Corporation cannot be liable for substandard or faulty installations.

Follow the instructions for mounting the case first, then install the screen

assembly into the case after you make the initial electrical connection to the

pigtail.

Make sure that you mount the case so that the electrical connection is on

the left side (audience left).

Removing the screen assembly from the case

The unit is shipped with the screen assembly fastened inside. Prior to

mounting the unit, you must remove the screen assembly from the case.

Using the supplied wrench, loosen the bolts shown in Figure 1. There is a

bolt inside each end of the screen slot.

Mounting the case

Follow this procedure to mount the case.

The Visionary Electriscreen can be installed into the ceiling or soffit. A false

ceiling is not intended to support the weight of a Visionary Electriscreen.

The unit is usually suspended, as shown in Figure 3, but it can be secured

to the ceiling using bolts or other appropriate fasteners.

If the unit is to be mounted to plaster, drywall, masonry, or other type of

surface, use an appropriate fastener. (These might include toggle or molly

bolts or similar fasteners.)

1. Install the case onto the support structure making sure that the

bottom is flush with the finished ceiling, if any.

2. Make sure the case is level.

3. Drywall or other ceiling material may be screwed directly to the

ceiling flanges on the case. Refer to Figure 1.

STEP 1. HANGING THE CASE

Case

Romex

Connector

To Electrical

Source

Support Structure

Figure 1: Mounted case

Figure 1: Bolt securing screen

assembly to case

Bolt

The motor requires standard AC input (unless an alternate voltage has been

specified). All connections are made to the electrical box on the side of the

unit (audience left).

There are several switch controls available. Follow the installation

procedure for the type of switch control you will install.

General suggestions for wiring:

Soldering is recommended.

The use of wire nuts is acceptable.

Refer to Figure 3 for an illustration of the electrical connection on the side of

the screen unit.

Visionary Electriscreen: Owner’s Manual 5

STEP 2. ELECTRICAL HOOK-UP

Caution

Professional techniques need to used when making any

electrical connection. A qualified electrician should perform

these procedures.

Be sure to follow all standard safety procedures for

installing electrical devices.

Do not disassemble or alter the configuration of the motor

or the unit's electrical connections. This may cause injury to

you or damage to the product.

The electrical connection should be made only to the type

of power source indicated on the marking label.

Figure 3: Electrical connection

Electrical

Connection

Screen

Romex

Connector

6Stewart Filmscreen Corporation

Installing the high voltage switch control

A standard 3-position AC wall switch is supplied. The high-voltage control is

connected to standard wall jack that is installed near the unit. The switch

alternates directions of screen motion by means of the hot lead, using the 3-

position switch.

Preparing the connection

Before making the electrical connections, you need:

An available AC constant power source

A 4-conductor romex or motor connector cable

Making the connections

Figure 4 illustrates the connections.

1. Connect the wall switch to the AC constant power source.

2. Connect the wall switch to the screen unit’s electrical box.

Figure 4: High voltage control wiring diagram

Screen Switch

AC Power

Source

DOWN-Black

UP-Red

Line (Hot)

COMMON-White Neutral

GROUND-Green

Visionary Electriscreen: Owner’s Manual 7

Installing the low-voltage 3-button switch option

The optional Stewart Filmscreen low-voltage control allows the use of low-

voltage wire to connect to the supplied 3-position 24V momentary wall

switch.

Preparing the connection

Before making the electrical connections, you need:

An available AC constant power source

A 4-conductor switch hook-up cable (4-conductor bell wire or

category 5 cable is typically used for long runs)

Cat 5, multi-conductor unshielded, or similar type electronic cable

can be used to connect the 3-button switch to the LVC. The

recommended wire gauge is 20 to 24 AWG. Use plenum-rated

cable when required.

Making the connection

Figure 5 illustrates the connection.

1. Mount the low-voltage control box near the screen.

2. Connect the low-voltage control box to the screen by connecting

the screen motor power leads to the power strip terminal block

located on the circuit board of the control box.

3. Connect the low voltage control box to the AC power source by

connecting the AC line voltage to the power strip terminal block

located on the circuit board of the control box.

4. Connect the switch to the low-voltage control box.

5. A parallel connection to an outboard audio-visual switching

network can be made at this time. (optional)

Figure 5: Low voltage 3-button switch wiring

Line R/F Input

InfraRed Input

Low Voltage

Switching

Neutral

COMMON-White

UP-Red

DOWN-Black

GROUND-Green

STOP-Yellow

COMMON-White

UP-Red

DOWN-Black

4 Conductor Hook-up Cable—20-24ga Recommended

Category 5 Typically Used (NOT Supplied)

Low Voltage Control Box 3-button

Momentary Switch

8Stewart Filmscreen Corporation

Installing the infrared remote control option

The optional Stewart Filmscreen infrared remote control allows control of

the screens from anywhere in the room.

Note: The distance between the hand-held remote control and the receiver

can be up to 50 feet / 15 m. It is necessary to have uninterrupted line-of-

sight between the remote and the receiver.

Preparing the connection

Refer to the previous section “Installing the low-voltage 3-button switch

option.”

Making the connection

Figure 6 illustrates the connection.

1. Mount the low-voltage control box near the screen.

2. Mount the infrared (IR) eye sensor near the screen.

3. Connect the low-voltage control box to the screen by connecting

the screen motor power leads to the power strip terminal block

located on the circuit board of the control box.

4. Connect the IR eye sensor to the small black plug-in module

located next to the switch input on the circuit board.

5. Connect the low voltage control box to the AC power source by

connecting the AC line voltage to the power strip terminal block

located on the circuit board of the control box.

6. Connect the switch to the low-voltage control box.

7. A parallel connection to an outboard audio-visual switching

network can be made at this time. (optional)

Figure 6: Infrared remote control wiring

Low Voltage Control Box 3-Button

Momentary

Infrared Sensor

Infrared Remote Control

Line R/F Input

InfraRed Input

Low Voltage

Switching

Neutral

COMMON-White

UP-Red

DOWN-Black

STOP-Yellow

COMMON-White

UP-Red

DOWN-Black

4 Conductor Hook-up Cable—20-24ga Recommended

Category 5 Typically Used (NOT Supplied)

GROUND-Green

Indice

Altri manuali Stewart Filmscreen Schermo di proiezione

Stewart Filmscreen

Stewart Filmscreen B Manuale utente

Stewart Filmscreen

Stewart Filmscreen Luxus ScreenWall Series Manuale utente

Stewart Filmscreen

Stewart Filmscreen Balon Series Manuale utente

Stewart Filmscreen

Stewart Filmscreen Visionary Manuale utente

Stewart Filmscreen

Stewart Filmscreen 4-Way ScreenWall ElectriMask Manuale utente

Stewart Filmscreen

Stewart Filmscreen WallScreen 2.5 Manuale utente

Stewart Filmscreen

Stewart Filmscreen AT 1.5 Manuale utente

Stewart Filmscreen

Stewart Filmscreen Vertical ES EM Manuale utente

Stewart Filmscreen

Stewart Filmscreen Stealth Trapdoor Electriscreen Manuale utente

Stewart Filmscreen

Stewart Filmscreen RP-1013 Manuale utente

Stewart Filmscreen

Stewart Filmscreen AB Electriscree Manuale utente

Stewart Filmscreen

Stewart Filmscreen Fixed Frame Screen Manuale utente

Stewart Filmscreen

Stewart Filmscreen VistaScope Manuale utente

Stewart Filmscreen

Stewart Filmscreen A Electriscreen Manuale utente

Stewart Filmscreen

Stewart Filmscreen Cabaret Manuale utente

Stewart Filmscreen

Stewart Filmscreen C Manuale utente

Stewart Filmscreen

Stewart Filmscreen LCD Rear-Projection TV Manuale utente

Stewart Filmscreen

Stewart Filmscreen Luxus Manuale utente

Stewart Filmscreen

Stewart Filmscreen Balon Series Manuale utente

Stewart Filmscreen

Stewart Filmscreen Cine-W Manuale utente

Stewart Filmscreen

Stewart Filmscreen Luxus Manuale utente

Stewart Filmscreen

Stewart Filmscreen Cima Istruzioni originali

Stewart Filmscreen

Stewart Filmscreen Balon Series Manuale utente

Stewart Filmscreen

Stewart Filmscreen Visionary Electriscreen Manuale utente

Manuali Schermo di proiezione popolari di altre marche

FART PRODUKT

FART PRODUKT Standard SCREEN Manuale utente

Draper

Draper E Series Manuale

Elite Screens

Elite Screens Elite Tripod Series Manuale utente

Laarhoven

Laarhoven Companion II Manuale utente

Renogy

Renogy RMS-LFPS-US Manuale utente

Da-Lite

Da-Lite ExecutiveElectrol Manuale utente

Samsung

Samsung S*H65* Manuale utente

FONESTAR

FONESTAR PPTR-43100-FA Manuale utente

Slide Clear

Slide Clear Varro XL Manuale utente

Elite Screens

Elite Screens M85XWS1-SRM Manuale utente

OS РХ-090Н Manuale utente

Niko

Niko 10-845 Manuale utente

Speaka Professional

Speaka Professional 2357532 Manuale operativo

Sima

Sima XL-72 Manuale utente

Jasic

Jasic EVO 2.0 ET-200P Manuale utente

Elite Screens

Elite Screens Starling 2 Series Manuale utente

InFocus

InFocus SC-WALL GRY-92H Manuale

Barco

Barco OverView MVL-615 Manuale utente