Stratasys Objet24 Guida all'installazione
Desktop Family
3D Printing System
Operator Training Guide
Basic Course
Course Outline
The operator training should be implemented during the installation.
The following is the outline for the operator training course.
System Installation & Initial Print Job
Topics
Activity
1. Unpack the Printer
Shock sensors, printer positioning
Observation
2. Prepare for Printing
Head- cover removal, inserting cartridges
3. Safety Procedures
Review safety guidelines
4. Initial Print Test
Send a print job: print service ATP
Use the quick start.
5. Install the WaterJet
Observation
6. Operating the WaterJet
Learn to operate the WaterJet
Hands-on
7. Operator Print Job
Review Objet Studio & Job Manager with operator.
The operator sends a print job.
Hands-on
Using Objet Software & Operator Maintenance
1. Printer Software Control
Become familiar with the application
Hands-on
2. Operator Maintenance
• Build tray cleaning
•Print Heads Cleaning
• Wiper
• Pattern test
•Head Alignment
UV Calibration
Head Optimization
• Waste container Replacement
Odor Filter Replacement
Wiper blade Replacement
• Roller waste collector
• Manual print head replacement
•UV Lamp Replacement
• System shutdown
• User Maintenance
Hands-on
3. Start Up Kit
Familiarize operator with Start-Up kit contents
Observation
Safety Procedures
Hot Surface
Risk of burns from:
Block –70°C
Heads - 75°C
UV socket
Do NOT touch these surfaces while they are hot.
High Voltage
Main Power Supply
UV Power Supply
UV Lamp Connectors
X-Axis Power Supply
Printer Computer Power Supply
Risk of Electric Shock
Ultra Violet
Radiation
Radiation from UV Lamps
Always use protective eyewear when the printer cover is open.
Manufacturer : UN process supply INC.
No : I005-017orange
Moving Parts
4 Moving Axes - X axes, Y axes, Z axes ,T axes (wiper)
UV Fans
Pumps
Handling
Printing
Materials
Printing materials (resins) are flammable –Do not expose them to flames, heat or
sparks.
Keep resins away from food and drink.
Uncured resin is toxic - minimize direct contact with the skin to prevent irritation
and other health hazards. Prolonged contact may cause burns.
Always wear protective gloves.
First Aid for
Working with
Resins
If respiratory irritation occurs, expose the victim to fresh air immediately.
If uncured resin comes in contact with the eyes, flush immediately with large
amounts of water for 15 minutes and seek medical attention.
When handling resins or material containers, wear protective goggles to
prevent uncured resin from splashing into the eyes.
If uncured resin comes in contact with the skin, wash the area immediately with
soap and cool water.
General Safety
Rules
Be familiar with the locations and use of safety equipment.
Do not use broken equipment. Machinery with moving parts must have a working
safety interlock, and a protective cover over the moving parts.
Do not open the cover while printer is operating.
If open, do not stare at the UV light and use protective eyewear to prevent exposure to
UV light.
CAD (Computer-Aided Design)
A file format used for producing
models on Objet printers.
SW for preparing the
tray for print.
Sends the print job to the
printer & manages the queue.
STL (Standard Triangulation
Language) and assemblies
SW used by engineers and
Architects for designing models
Objet Studio/ GrabCAD
Job Manager
Deliver the material to the print block.
Pumps
Keeps the material from leaking out of the head block.
Vacuum
2 model and 2 support cartridges
Material Cartridges
Contains the prints head and printing material.
Moves in X and Y direction (2-D)
Print Block
1 model & 1 support jet liquid material through
nozzles onto the tray .
Print Heads
Flattens and smoothens the layer
Cures the jetted material
UV Lamp
Moves down on the z-axis
Build Tray (z-axis)
wipes the print heads during purge sequence
Wiper
Excess material is transferred to the waste container
the roller bath and wiper bath.
Waste Container
Roller
Printed model
Cleans the printed model by
removing support materials
using water pressure or
circulation
Remove model from the printer
with spatula
Support Removal System
Printing Workflow
1STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY
Introducing Desktop
Family 3D Printers
2STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY
Objet24 Objet30 Objet30 OrthoDesk Objet30
Dental Prime Objet30 Pro Objet30 Prime
Tray Size 240x 200 x 150 mm
(9.45 x 7.87 x 5.9 in)
300 x 200 x 150 mm
(11.81 x 7.87 x 5.9 in)
300 x 200 x 100 mm
(11.81 x 7.87 x 3.95 in)
300 x 200 x 100 mm
(11.81 x 7.87 x 3.95 in)
300 x 200 x 150 mm
(11.81 x 7.87 x 5.9 in)
300 x 200 x 150 mm
(11.81 x 7.87 x 5.9 in)
Printing
Mode High Speed High Speed High Speed
High Speed
High Quality
Draft
High Speed
High Speed
High Quality
Draft
Tray Size & Printing Modes
1STRATASYS / MATERIALS OVERVIEW
MATERIALS
OVERVIEW
2STRATASYS / MATERIALS OVERVIEW
•PolyJet materials are acrylic-based photopolymers
•Photopolymer is a polymer that cures, or becomes solid, when exposed to light.
(in our case: UV light)
•When exposed to UV light the material is transformed from a soluble formulation
into a hard polymer network –the model!
Introduction
3STRATASYS / MATERIALS OVERVIEW
Materials-Printer Availability
RGD835
Vero
White
Plus
RGD875
Vero
Black
RGD850
Vero
Grey
RGD840
Vero
Blue
RGD430
Durus
White
RGD810
Vero
Clear
RGD525
High-
Temp
RGD450
Endur
RGD720
FullCure
720
FLX973
Tango
Black
FLX950
Tango
Grey
MED690
Vero
DentPlus
MED610
Bio-
compatib
le
MED620
Vero
Glaze
RGD750
Draft
Grey
SUP706/
705
Objet24 Y
Objet30 Y Y Y Y Y Y*
Objet30
OrthoDesk Y Y Y Y*
Objet30
Dental
Prime
Y Y Y Y*
Objet30
Pro Y Y Y Y Y Y Y Y Y*
Objet30
Prime Y Y Y Y Y Y Y Y Y Y Y Y Y** Y*
* V3/5 only
** V5 only
4STRATASYS / MATERIALS OVERVIEW
Rigid Opaque | Vero Family
Ideal for: •Final product look
•Functional engineering parts for:
•Prototyping
•Pre-production
•Production verification
•Form/fit testing
•RTV molding patterns
Properties:
•Durable and stiff
•Excellent detail visualization
•Opaque colors
•Good dimensional stability
Color: Blue, White, Black, Gray
Altri manuali per Objet24
1
Questo manuale è adatto per i seguenti modelli
5
Indice
Altri manuali Stratasys Stampante 3D
Stratasys
Stratasys Objet30 Manuale utente
Stratasys
Stratasys 180-00108 uPrint Manuale utente
Stratasys
Stratasys Fortus 360mc Guida di riferimento
Stratasys
Stratasys uPrint Manuale utente
Stratasys
Stratasys Objet260 Connex Manuale utente
Stratasys
Stratasys J5 Series Manuale utente
Stratasys
Stratasys Neo 450 Manuale utente
Stratasys
Stratasys F123 Series Manuale utente
Stratasys
Stratasys J4100 Manuale utente
Stratasys
Stratasys Objet30 Manuale utente
Stratasys
Stratasys F900 Manuale utente
Stratasys
Stratasys Fortus 380mc Manuale di istruzioni
Stratasys
Stratasys K6 Series Manuale utente
Stratasys
Stratasys J750 Manuale utente
Stratasys
Stratasys Objet260 Connex Manuale utente
Stratasys
Stratasys Origin One Manuale utente
Stratasys
Stratasys F120 Manuale utente
Stratasys
Stratasys Dimension 768/Elite Manuale utente
Stratasys
Stratasys FDM 2000 Manuale utente
Stratasys
Stratasys Objet1000 Connex 2 Manuale utente
