Sun Microsystems Sun SPARC Enterprise M8000 Manuale utente

This document describes how to replace an existing FAN Unit fixing bracket with a new more secure FAN Unit

fixing bracket. The new bracket restricts the FAN Unit movement to less than 3.2 mm to prevent accidental

unseating and loss of cooling.

The FAN Unit fixing bracket is located vertically between the FAN Units. The brackets have a hinge on the

bottom and a screw on the top and secure the fans in place. The retention kit includes a fixing bracket tool

(345-1443-01) to simplify the loosening of the hinge pin.

This is a hot-swap procedure that can be implemented while the system is running.

Locating the FAN Unit Fixing Bracket

Compare the part number of the bracket with the location of the bracket being replaced using the tables below.

TABLE 1 SPARC Enterprise M8000 Server

TABLE 2 SPARC Enterprise M9000 Server

Bracket Part Number Bracket location Number of Brackets

541-3413-01 System Rear 2

541-3420-01 System Front (Left) 1

541-3407-01 System Front (Right) 1

Bracket Part Number Bracket location Number of Brackets

541-3407-01 System Front 1

541-3410-01 System Rear 2

SPARC Enterprise M8000/M9000 Servers

Fan Tray Retention Kit

Replacing the FAN Unit Fixing Bracket

1. Unlock and open the server doors.

2. Use a Phillips No. 2 screwdriver to loosen the screw at the top of the fixing bracket.

Leave the screw attached until after the pin is removed to prevent the fixing bracket from falling.

3. Place the fixing bracket tool so that it is flush to the chassis and use a nylon tipped hammer or mallet to

tap the hinge pin out of the old fixing bracket (the hinge pin should remain in the hinge).

To avoid bending the fixing bracket tool, orient the tool handle horizontally so that the pin on the tool aligns

with the hinge pin.

Note – On the M8000 server, the hinge pin of the fixing bracket at the bottom right of the front of the M8000

server will hit the fan tray cage handle as it is tapped out of the bracket. When this happens, gently bend the

hinge pin downward, as it is being pushed out of the old fixing bracket. (The pin can not be removed from the

hinge until the bracket is removed.) A replacement pin is included in the kit.

4. Use a Phillips No. 2 screwdriver to remove the screw at the top of the fixing bracket and remove the

bracket.

Note – Discard the bent hinge pin. Use a new hinge pin in Step 6 below.

5. Place the new bracket in position, and align the parts of hinge.

The bracket can be held vertically or horizontally during the alignment.

6. Use a slip groove plier to carefully push the hinge pin into the hinge.

Caution – The pin bends easily. Alternately, you can use the back end of the fixing bracket tool and

the nylon hammer to tap the pin into the hinge.

7. Use a Phillips No. 2 screwdriver to secure the screw at the top of the fixing bracket.

8. Repeat Step 1 through Step 7 for each FAN Unit fixing bracket to be replaced.

Product Documentation

You can view, print, or purchase a broad selection of documentation, including localized versions, at:

http://www.oracle.com/technetwork/indexes/documentation/index.html

Technical Support

If you have technical questions about this product that are not answered in this document, go to:

https://support.oracle.com

Part No.: E22107-01

Mfg No.: 820-5635-12

March 2011

Altri manuali per Sun SPARC Enterprise M8000

Questo manuale è adatto per i seguenti modelli

Altri manuali Sun Microsystems Server

Sun Microsystems

Sun Microsystems Fire X4600 Manuale utente

Sun Microsystems

Sun Microsystems Fire 4810 Manuale utente

Sun Microsystems

Sun Microsystems Ultra 60 Series Manuale utente

Sun Microsystems

Sun Microsystems Netra 210 Manuale utente

Sun Microsystems

Sun Microsystems Sun Fire X4450 Manuale utente

Sun Microsystems

Sun Microsystems Server X4-2 Manuale utente

Sun Microsystems

Sun Microsystems Sun Fire X4140 Guida all'installazione

Sun Microsystems

Sun Microsystems SPARC Enterprise T5140 Manuale utente

Sun Microsystems

Sun Microsystems StorageTek SL48 Manuale utente

Sun Microsystems

Sun Microsystems Fire High-End Server Systems Manuale di programmazione

Sun Microsystems

Sun Microsystems Sun Fire X4250 Manuale utente

Sun Microsystems

Sun Microsystems Fire 6800 Manuale utente

Sun Microsystems

Sun Microsystems Fire 4810 Manuale di istruzioni per l'installazione

Sun Microsystems

Sun Microsystems Sun Enterprise 220R Manuale utente

Sun Microsystems

Sun Microsystems Sun Fire V490 Manuale

Sun Microsystems

Sun Microsystems Sun Fire X4150 Server Manuale di istruzioni

Sun Microsystems

Sun Microsystems Sun SPARC Enterprise M3000 Manuale utente

Sun Microsystems

Sun Microsystems Netra ct Manuale utente

Sun Microsystems

Sun Microsystems Sun Fire X4100 M2 Manuale utente

Sun Microsystems

Sun Microsystems Netra T2000 Manuale utente

Sun Microsystems

Sun Microsystems Sun SPARC Enterprise M4000 Manuale utente

Sun Microsystems

Sun Microsystems Sun HPC 3.0 Manuale utente

Sun Microsystems

Sun Microsystems Sun Fire E6900 Manuale tecnico

Sun Microsystems

Sun Microsystems Ultra Enterprise 6000 Systems Guida utente

Manuali Server popolari di altre marche

HP AlphaServer ES47 Manuale utente

Dell

Dell PowerEdge R410 Manuale utente

PowerNAS

PowerNAS CMA Manuale utente

Supero

Supero FatTwin F617R3-FT Manuale utente

MSI

MSI P1-109N-L70 Manuale utente

Dell

Dell PowerEdge XE9640 Manuale

Dell

Dell PS4100 Istruzioni di montaggio

EtroVISION

EtroVISION EV3151 Manuale utente

NEC

NEC Express5800/T110j Manuale utente

HP ProLiant Gen9 Manuale utente

Compaq

Compaq ProLiant 3000 Manuale

Dell

Dell PowerEdge 3YPMN Manuale utente

iRobo

iRobo IPC2U Manuale utente

Nortel

Nortel 1000 Con?guration guide Manuale utente

Asus

Asus AP7500 Manuale operativo e di manutenzione

Avid Technology

Avid Technology AirSpeed 5000 Manuale utente

HP Integrity rx2600 Guida all'installazione

Milestone

Milestone Husky IVO 350T Manuale utente