Super SC809LT-780B Manuale utente
SC809 Chassis Series
USER’S MANUAL
1.0b
SC809LT-780B
SC809T-780B
SC809T-980B
SC809T-1200B
SUPER ®
SC809 Chassis Manual
ii
Manual Revision 1.0a
Release Date: August 10, 2009
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software, if any,
and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or
reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2009 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SC809 1U chassis. Installa-
tion and maintenance should be performed by experienced technicians only.
Supermicro’s SC809 1U chassis features a unique and highly-optimized design
for twin dual-core Xeon platforms. The chassis is equipped with a 780W, 980W or
1200W high-efciency power supply for superb power savings. High-performance
fans provide ample optimized cooling for the SC809's twin motherboards, and eight
2.5" hot-swap drive bays offers maximum storage capacity in a 1U form factor.
Recommended for SAS or enterprise SATA HDDs only
This document lists compatible parts available when this document was published.
Always refer to the our Web site for updates on supported parts and congura-
tions.
SC809 Chassis Manual
iv
Manual Organization
Chapter 1 Introduction
The rst chapter provides a checklist of the main components included with this
chassis and describes the main features of the SC809 chassis. This chapter also
includes contact information.
Chapter 2 System Safety
This chapter lists warnings, precautions, and system safety. You should thoroughly
familiarize yourself with this chapter for a general overview of safety precautions
that should be followed before installing and servicing this chassis.
Chapter 3 Chassis Components
Refer here for details on this chassis model including the fans, bays, airow shields,
and other components.
Chapter 4 System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 5 Chassis Setup and Maintenance
Follow the procedures given in this chapter when installing, removing, or
reconguring your chassis.
Chapter 6 Rack Installation
Refer to this chapter for detailed information on chassis rack installation. You should
follow the procedures given in this chapter when installing, removing or reconguring
your chassis into a rack environment.
v
Preface
Appendices
This section lists compatible cables, power supply specications, and compatible
backplanes. Not all compatible backplanes are listed. Refer to our Web site for the
latest compatible backplane information.
Appendix A Chassis Cables
Appendix B Power Supply Specications
Appendix C SAS-809 Backplane Specications
SC809 Chassis Manual
vi
Table of Contents
Chapter 1 Introduction
1-1 Overview ......................................................................................................... 1-1
1-2 Shipping List.................................................................................................... 1-1
1-3 Contacting Supermicro.................................................................................... 1-2
1-4 Returning Merchandise for Service................................................................. 1-3
Chapter 2 System Safety
2-1 Overview ......................................................................................................... 2-1
2-2 Warnings and Precautions .............................................................................. 2-1
2-3 Preparing for Setup......................................................................................... 2-1
2-4 Electrical Safety Precautions .......................................................................... 2-1
2-5 General Safety Precautions ............................................................................ 2-2
2-6 System Safety ................................................................................................. 2-3
Chapter 3 Chassis Components
3-1 Overview ......................................................................................................... 3-1
3-2 Components .................................................................................................... 3-1
Chassis............................................................................................................ 3-1
Backplane........................................................................................................ 3-1
Fans ................................................................................................................ 3-1
Mounting Rails ................................................................................................ 3-1
Power Supply .................................................................................................. 3-2
Air Shroud ....................................................................................................... 3-2
3-3 Where to get Replacement Components........................................................ 3-2
Chapter 4 System Interface
4-1 Overview ......................................................................................................... 4-1
4-2 Control Panel Buttons ..................................................................................... 4-2
4-3 Control Panel LEDs ........................................................................................ 4-2
4-4 Drive Carrier LEDs.......................................................................................... 4-3
SAS/SATA Drives ............................................................................................ 4-3
SCSI Drives..................................................................................................... 4-4
Chapter 5 Chassis Setup and Maintenance
5-1 Overview ......................................................................................................... 5-1
Installation Procedures .................................................................................. 5-1
General Maintenance Procedures .................................................................. 5-1
5-2 Removing the Chassis Cover ......................................................................... 5-2
5-3 Installing Hard Drives...................................................................................... 5-3
5-4 Motherboard Installation.................................................................................. 5-5
vii
Preface
I/O Shield ........................................................................................................ 5-5
Permanent and Optional Standoffs................................................................. 5-5
Installing the Motherboards............................................................................. 5-6
Add-on Card/Expansion Slot Setup ................................................................ 5-7
5-5 Installing the Air Shrouds ................................................................................ 5-9
Air Shrouds ..................................................................................................... 5-9
5-6 Checking the Air Flow ................................................................................... 5-10
Installation Complete..................................................................................... 5-10
5-7 System Fans ..................................................................................................5-11
5-8 Power Supply ............................................................................................... 5-13
Power Supply Replacement.......................................................................... 5-13
Chapter 6 Rack Installation
6-1 Overview ......................................................................................................... 6-1
6-2 Unpacking the System .................................................................................... 6-1
6-3 Preparing for Setup......................................................................................... 6-1
Choosing a Setup Location............................................................................. 6-1
6-4 Warnings and Precautions .............................................................................. 6-2
Rack Precautions ............................................................................................ 6-2
General Server Precautions............................................................................ 6-2
Rack Mounting Considerations ....................................................................... 6-3
Ambient Operating Temperature ................................................................ 6-3
Reduced Airow ......................................................................................... 6-3
Mechanical Loading ................................................................................... 6-3
Circuit Overloading..................................................................................... 6-3
Reliable Ground .............................................................................................. 6-3
6-5 Rack Mounting Instructions............................................................................. 6-4
Identifying the Sections of the Rack Rails...................................................... 6-4
Installing the Inner Rail Extensions ................................................................ 6-5
Installing the Outer Rails................................................................................. 6-6
Installing the Chassis into a Rack................................................................... 6-7
Appendix A Cables, Screws, and Other Accessories
Appendix B SC809 Power Supply Specications
Appendix C SAS-809T/TQ Backplane
SC809 Chassis Manual
viii
Notes
1-1
Chapter 1: Introduction
Chapter 1
Introduction
1-1 Overview
Supermicro’s SC809 1U chassis features a unique and highly-optimized design.
The chassis is equipped with either a 780W, 980W or 1200W high-efciency power
supply. High performance fans provide ample optimized cooling for the twin moth-
erboards, and eight hot-swappable drive bays offer maximum storage capacity in a
1U form factor. Recommended for SAS or enterprise SATA HDDs only
1-2 Shipping List
Please visit the following link for the latest shiping lists and part numbers for your par-
ticular chassis model http://www.supermicro.com/products/chassis/1U/?chs=809
SC809 Chassis
Model CPU HDD I/O Slots Power
Supply
SC809LT-780B Single/Dual CPU
Twin 4x Hot-
swap
2.5”
Twin LP 780W
SC809T-780B Single/Dual CPU
Twin 4x Hot-
swap
2.5”
Twin LP 780W
SC809T-980B Single/Dual CPU
Twin 4x Hot-
swap
2.5”
Twin LP 980W
SC809T-1200B Single/Dual CPU
Twin 4x Hot-
swap
2.5”
Twin LP 1200W
SC809 Chassis Manual
1-2
1-3 Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: +1 (408) 503-8000
Fax: +1 (408) 503-8008
Email: [email protected] (General Information)
Web
Site: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: +31 (0) 73-6400390
Fax: +31 (0) 73-6416525
Email: [email protected] (General Information)
Asia-Pacic
Address: Super Micro Computer, Inc.
4F, No. 232-1, Liancheng Rd.
Chung-Ho 235, Taipei County
Taiwan, R.O.C.
Tel: +886-(2) 8226-3990
Fax: +886-(2) 8226-3991
Web
Site: www.supermicro.com.tw
Technical Support:
Email: [email protected]
Tel: 886-2-8226-1900
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Super Server
