Supermicro SuperServer SYS-221BT-HNC8R Istruzioni per l'installazione
3
Abstract
This document provides clear guidance for end-of-life recyclers on how to identify
and disassemble reportable materials in compliance with the Waste Electrical and
Electronic Equipment (WEEE) directive.
WEEE DISASSEMBLY INSTRUCTIONS
SUPERMICRO SYS-221BT-HNC8R ENCLOSURE
Table of Contents
1. Product Views............................................................................................................................................1
2. Reportable Materials on SYS-221BT-HNC8R.............................................................................................3
3. Disassemble Instructions ..........................................................................................................................4
3.3 Step-by-Step Disassembly Instructions ..............................................................................................7
1. Removing Cable and Chassis Top Cover ...........................................................................................7
2. Removing Hard Disk Drive ................................................................................................................8
3. Removing Power Supply ...................................................................................................................9
4. Removing Power Distributor...........................................................................................................10
5. Removing Backplane.......................................................................................................................11
6. Removing Fan ..................................................................................................................................11
7. Removing AIOM Card......................................................................................................................12
8. Removing Air shroud, Riser and Riser Bracket...............................................................................12
9. Removing Processor........................................................................................................................13
10. Removing DIMM..............................................................................................................................15
11. Removing M.2..................................................................................................................................15
12. Removing Motherboard..................................................................................................................15
1
1. Product Views
Front view
Rear view
Product construct view
Backplane
FAN
Hard Disk Drive/
Solid State Drive
Node A, C
Node B, D
Node construct view
Power Supply
3
2. Reportable Materials on SYS-221BT-HNC8R
According to Article 8(2) and Annex VII of WEEE directive 2012/19/EU, Below materials and components
should be selectively treated.
Description
Notes
No.
Quantity
Printed Circuit Boards (PCB) or
Printed Circuit Assemblies (PCA)
With a surface greater than 10 sq cm
(Depending on the product
configuration)
2.4, 3.5, 4.2, 5.1, 7.2, 8.2,
9.2,10.1, 11.1, 12.1
32
Batteries
All types, including standard alkaline
and lithium coin or button-style
batteries
12.2
4
Mercury-containing components
For example, mercury in lamps,
display backlights, scanner lamps,
switches, batteries
Liquid Crystal Displays (LCD) with
a surface greater than 100 sq cm
Includes background illuminated
displays with gas discharge lamps
Cathode Ray Tubes (CRT)
Capacitors / condensers
(Containing PCB/PCT)
Electrolytic Capacitors /
Condensers measuring greater
than 2.5 cm in diameter or height
Depending on the power supply
model
3.6
2
External electrical cables and
cords
1.1
2
Gas Discharge Lamps
Plastics containing Brominated
Flame Retardants weighing > 25
grams (not including PCBs or PCAs
already listed as a separate item
above)
Components and parts containing
toner and ink, including liquids,
semi-liquids (gel/paste), and toner
Include the cartridges, print heads,
tubes, vent chambers, and service
stations.
Components and waste containing
asbestos
Components, parts, and materials
containing refractory ceramic
fibers
Components, parts, and materials
containing radioactive substances
3. Disassemble Instructions
The intent of this document is to provide guidance to recyclers on the presence of materials and
components at the product / family level, as required by the EU WEEE Directive 2012/10/EU. This
document should also help direct recyclers to proper methods for removing parts and general
product disassembly instructions.
This chapter consists of three subsections:
Recommended disassembly tools, disassembled flowchart, step-by-step disassembly instructions to direct
recycler proper methods to treated.
3.1 Recommended Disassembly Tools
Disassembly tool
Cross screwdriver
Flathead screwdriver
3.2 Disassembled flowchart
Server
Chassis
Power Supply
Storage Card and CPU
Chassis
Chassis Enclosure
Fan Holder
Sponge
Fan
Screw, Stand-off
Motherboard
Add-on Card
Controller Card
Riser Card
Controller Card
Cable
Battery
Power Supply
Power Enclosure
Screw and Standoff
Power Supply Module
Power Cable
Storage Card and CPU
Heat Sink
Processor
Solid State Drive
AIOM Card
DIMM
7
3.3 Step-by-Step Disassembly Instructions
1. Removing Cable and Chassis Top Cover
1. Use the operating system to power down the system.
2. After the system has completely shut-down, disconnect the power cords from the power supply
modules.
3. Remove all cables/ unit from the server IO port.
4. The chassis top cover can be lifted off after removing two screws.
No.
Description
No.
Description
1.1
Power Cable
1.6
Chassis
1.2
VGA Port
1.7
Top Cover
1.3
USB Port
1.4
BMC LAN
1.5
LAN Port
1.1
1.2
1.3
1.4
1.5
1.4
1.2
1.3
1.5
1.6
1.7
8
2. Removing Hard Disk Drive
1. Push the release button on the drive carrier, which will extend the drive bay handle
2. Use the drive bay handle to pull the drive carrier out of the chassis
3. Remove the dummy tray insert by first removing two screws, then pull out the dummy tray
5. Use a cross screwdriver to remove the drive enclosure
2.1
1
.
2.2
2.3
Indice
Altri manuali Supermicro Server
Supermicro
Supermicro SYS-521C-NR Manuale utente
Supermicro
Supermicro SuperServer SYS-221BT-HNR Manuale utente
Supermicro
Supermicro SUPERSERVER 5018R-M Manuale utente
Supermicro
Supermicro SuperServer SYS-221HE-FTNR Manuale utente
Supermicro
Supermicro SSG-6049P-E1CR24H Manuale utente
Supermicro
Supermicro A+ AS-2124BT-HTR Manuale utente
Supermicro
Supermicro SuperServer SYS-5039MC-H8TRF Manuale utente
Supermicro
Supermicro SC116AC2-R706WB Manuale utente
Supermicro
Supermicro SuperServer 6013P-8 Manuale utente
Supermicro
Supermicro SuperServer 5019A-12TN4 Manuale utente
Supermicro
Supermicro 7044H-82 Manuale utente
Supermicro
Supermicro SuperServer E300-8D Manuale utente
Supermicro
Supermicro SuperServer 5029AP-TN2 Manuale utente
Supermicro
Supermicro SUPERSERVER 5028D-TN4T Manuale utente
Supermicro
Supermicro SUPERSERVER 6018R-MD Manuale utente
Supermicro
Supermicro SuperStorage 2029P-DN2R24L Manuale utente
Supermicro
Supermicro SuperServer E50-9AP-N5 Manuale utente
Supermicro
Supermicro SuperServer 2026GT-TRF Manuale utente
Supermicro
Supermicro SUPERSERVER 2029GP-TR Manuale utente
Supermicro
Supermicro AS-1040C-8 Manuale utente
