Supero AOC-UINF-M2 Manuale utente
Rev. 1.0
AOC-UINF-M2
USER'S GUIDE
SUPER ®
ii
AOC-UINF-M2 Add-on Card User's Guide
Manual Revision 1.0
Release Date: March 17, 2008
Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not
copy or otherwise reproduce/distribute any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2008 by SUPER MICRO COMPUTER INC.
All rights reserved.
Printed in the United States of America
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software, if any,
and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or
reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara
shall be the exclusive venue for the resolution of any such disputes. Super Micro's total liability
for all claims will not exceed the price paid for the hardware product.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
iii
Safety Information and Technical Specifications
Table of Contents
Introduction
Overview ............................................................................................................iv
Product Features................................................................................................iv
Supported Operating Systems .......................................................................................v
Required Cables.............................................................................................................v
Supported Platforms.......................................................................................................v
Motherboards ......................................................................................................v
Servers ................................................................................................................v
Contacting Supermicro...................................................................................... vii
Returning Merchandise for Service ................................................................. viii
Chapter 1 Safety Guidelines
1-1 ESD Safety Guidelines ................................................................................... 1-1
1-2 General Safety Guidelines .............................................................................. 1-1
1-3 An Important Note to Users ............................................................................ 1-2
Chapter 2 Add-on Card Components
2-1 Front Connectors and LEDs ........................................................................... 2-1
2-2 Front Connector and LED Definitions............................................................. 2-2
Chapter 3 Installation
3-1 Before Installation ........................................................................................... 3-1
3-2 Hardware Installation ...................................................................................... 3-1
3-3 Windows 2003/XP/2000 Driver Installation..................................................... 3-2
iv
AOC-UINF-M2 Add-on Card User's Guide
Introduction
Overview
This manual is written for system integrators, PC technicians and knowledgeable
PC users who intend to integrate Supermicro's AOC-UINF-M2 Add-on Card.
Product Features
The AOC-UINF-M2 offers the following features:
Mellanox® ConnectX DDR MT25408A0-FCC-GI Controller
Low-profile UIO form factor
Dual CX4 Connectors
20Gb/s per port
PCI-e X8 2.0
RoHS compliant 5/6
•
•
•
•
•
•
v
Safety Information and Technical Specifications
Supported Operating Systems
The AOC-UINF-M2 supports the following Operating Systems (OS):
Windows
Linux
VMWare ESX Server
Novell
Required Cables
The AOC-UINF-M2 requires CX4 copper-based cable:
Up to 10m for 20Gb/s or 20m for 10Gb/s
Supported Platforms
Motherboards
The following motherboards support the AOC-UINF-M2 add-on card.
H8SMU, PDSMU, X7DAL-E, X7DAL-E+, X7DBN, X7DBU, X7DCU, X7DWA-N,
X7DWN+, X7DWU or H8DMU+.
Servers
The following servers support the AOC-UINF-M2 add-on card.
5015M-Ni, 5015M-NT, 5015M-UR, 6015B-NT, 6015B-NTR, 6015B-U, 6015B-UR,
6015C-Ni, 6015C-NTR, 6015C-UR, 6015W-Ni, 6015W-NTR, 6015W-UR, 5025M-
UR, 6025C-UR, 6025W-NTR+, 6025W-UR, 7045A-WT, 1011M-UR, 1011M-Ni and
1021M-UR+
•
•
•
•
•
vi
AOC-UINF-M2 Add-on Card User's Guide
Notes
vii
Safety Information and Technical Specifications
Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: +1 (408) 503-8000
Fax: +1 (408) 503-8008
Web Site: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: +31 (0) 73-6400390
Fax: +31 (0) 73-6416525
Asia-Pacific
Address: Super Micro Computer, Inc.
4F, No. 232-1, Liancheng Rd.
Chung-Ho 235, Taipei County
Taiwan, R.O.C.
Tel: +886-(2) 8226-3990
Fax: +886-(2) 8226-3991
Web Site: www.supermicro.com.tw
Technical Support:
Tel: 886-2-8226-1900
viii
AOC-UINF-M2 Add-on Card User's Guide
Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is required be-
fore any warranty service will be rendered. You can obtain service by calling your
vendor for a Returned Merchandise Authorization (RMA) number. When returning
to the manufacturer, the RMA number should be prominently displayed on the
outside of the shipping carton, and mailed prepaid or hand-carried. Shipping and
handling charges will be applied for all orders that must be mailed when service
is complete.
For faster service, RMA authorizations may be requested online (http://www.
supermicro.com/support/rma/).
Whenever possible, repack the add-on card in the original Supermicro box, using
the original packaging materials. If these are no longer available, be sure to pack
the add-on card in an anti-static bag and inside the box. Make sure that there is
enough packaging material surrounding the add-on card so that it does not become
damaged during shipping.
This warranty only covers normal consumer use and does not cover damages in-
curred in shipping or from failure due to the alteration, misuse, abuse or improper
maintenance of products.
During the warranty period, contact your distributor first for any product problems.
1-1
Safety Information and Technical Specifications
Chapter 1
Safety Guidelines
To avoid personal injury and property damage, carefully follow all the safety steps
listed below when accessing your system or handling the components.
1-1 ESD Safety Guidelines
Electric Static Discharge (ESD) can damage electronic components. To prevent dam-
age to your system, it is important to handle it very carefully. The following measures
are generally sufficient to protect your equipment from ESD.
Use a grounded wrist strap designed to prevent static discharge.
Touch a grounded metal object before removing a component from the antistatic
bag.
Handle the add-on card by its bracket only; do not touch its components, pe-
ripheral chips or gold contacts.
Put the card and peripherals back into their antistatic bags when not in use.
1-2 General Safety Guidelines
Always disconnect power cables before installing or removing any components
from the computer.
Disconnect the power cable before installing or removing any cables from the
system.
Make sure that the add-on card is securely and properly installed on the moth-
erboard to prevent damage to the system due to power shortage.
•
•
•
•
•
•
•
1-2
AOC-UINF-M2 Add-on Card User's Guide
1-3 An Important Note to Users
All images and layouts shown in this user's guide are based upon the latest PCB
Revision available at the time of publishing. The card you have received may or
may not look exactly the same as the graphics shown in this manual.
•
Indice
Altri manuali Supero Scheda di rete
Supero
Supero Supero AOC-SIMLP-3 Manuale utente
Supero
Supero AOC-USAS-H8ir Manuale utente
Supero
Supero AOC-SG-i2 Manuale utente
Supero
Supero AOC-USASLP-S8i Manuale utente
Supero
Supero AOC-SIM1U-3B Manuale utente
Supero
Supero AOC-SAT2-MV8 Manuale utente
Supero
Supero AOC-USASLP-L8i Manuale utente
Supero
Supero AOC-USAS-S8i Manuale utente
Supero
Supero AOC-LPZCR2 Manuale utente
Manuali Scheda di rete popolari di altre marche
Buffalo
Buffalo AirStation WLI-PCM-L11GP Manuale utente
National Instruments
National Instruments NI 9234 Manuale utente
Hama
Hama 49276 Manuale utente
Linksys
Linksys WCF54G - Wireless-G Compact Flash Card Manuale operativo
Compaq
Compaq Wireless LAN 100 Manuale utente
Bose
Bose PowerMatch Dante Manuale utente