SYMA X20W Manuale utente
8+
4-CHANNEL PRESSURE FIXED POSITION HOVERING
REMOTE CONTROL DRONE
GYRO REMOTE CONTROL SERIES
X
20W
1USER MANUAL
MAIN FEATURES
● Utilizes the 4-axis structure, enabling the drone to be even
more flexible, speedy.It can fly indoor .
● Built-in 6-axis gyro stabilizer to ensure accurate positioning
in-flight.
● The structure uses a modular design which makes it easy to
install and repair.
● Headless function making it easy for directional control.
● Pressure-fixed-position hovering function for Auto Hover Mode.
● 360° stunt flip.
● Auto take-off and landing.
● HD wireless real-time transmission aerial for getting the fun of
different photography.
Safety Guide
1. Please store the smaller-sized drone accessories in places that are out of
reach of children.
2. This drone is very powerful. For all first-time flights, the left joystick must be
slowly pushed up in order to prevent the drone from ascending too fast to
avoid unnecessary collision and possible damage and injury.
3. When the flight is ended, first turn off the power of the remote control. Then
turn off the power of the drone.
4. Avoid placing the batteries in places with high temperatures and exposure
to heat.
5. Take extra precaution to ensure that the drone is at a minimum distance of
15 feet from the pilot, other people, and animals in order to prevent bodily
injury during flight operation. A minimum separation distance of 20 cm must
be maintained between the user’s body and the device under normal use
condition.
6. This drone is for people ages 8+. It must be flown always within the line of
sight of the pilot (or instructor) and flown safely.
7. Non-rechargeable batteries are not to be recharged; Batteries are to be
inserted with the correct polarity; Different types of batteries or new and used
batteries are not be mixed.
8. When the drone is not in use, please remove the batteries in the remote control.
9. The supply terminals are not be short-circuited.
10.Discharge the battery to 40%-50% (On a full charge, fly for half of the total
flight time) if it will not be used for 10 days or more, this can greatly extend
the battery life.
11.Please keep a safe distance from the spinning propellers to avoid injury.
12.To ensure the electromagnetic environment requirement of the aviation radio
(station), using remote controls in the zone, which is in a radius of about
5000m zone from the circle center of the airport runway, is forbidden. All
users also should abide by the regulation of the radio set forth by government
and regulatory agencies including the duration and area.
13.Only uses the recommended transformer for the model, and the transformer
is not a model. Disconnect the transformer from the model which is available
cleaning with liquids before cleaning. Check the cord, plug, enclosure and
other parts of the transformer regularly. If any damages have been discovered,
please immediately stop using it, until it was completely repaired.
14.Never look steadily at the laser beam since the laser radiation.
15.Attention：Drone assembly under adult supervision.
16.The pilot is responsible for the safe operation and safe distance from
uninvolved persons and property on the ground and from other airspace
users and shall never fly the drone above crowds (> 12 persons).
17.The packing has to be kept since it contains important information.
-1-
1.Use dry and soft cloth to clean this product.
2.Avoid exposing this product to heat.
3.Do not immerse this product in water, otherwise, the electronic parts will be
damaged.
4.Transformers used with the toy are to be regularly examined for damage to
the cord, plug, enclosure and other parts, and that, in the event of such damage,
the toys must be used with this transformer until the damage has been repaired.
Precautions as follows during charging of battery:
- Avoid placing the active batteries in places with direct exposure, sunlight and
high temperatures. For example, naked light or electrical equipment
installations; otherwise it may cause damages or explosions .
- Avoid immersing the batteries in the water. The batteries shall be stored in a
cool and dry place.
- Avoid dismantling the batteries.
- During the charging of battery, avoid leaving the charging place.
- Rechargeable batteries are to be removed from the toy before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
The charging time is about 70 minutes; Hover flight time
is approximately 4 minutes.
Connect the battery power cord to the
USB, then connect the USB interface to the
computer. (The indicator light of the drone
will turn on while charging, and turn off or flash
when charging completed. It takes about 70
minutes to completely charge the battery. )
The following items can be found in this product package:
Drone
Remote Control
User Manual
4 Blades
USB Cable
●
●
●
●
●
Mobile Phone
Retanining Clip
●
Repair and Maintenance
Package Description
Battery Charging Methods for Drone
8+
1
4-CHANNEL PRESSURE FIXED POSITION HOVERING
REMOTE CONTROL DRONE
GYRO REMOTE CONTROL SERIES
X
20W
USER MANUAL
MAIN FEATURES
● Utilizes the 4-axis structure, enabling the drone to be even
more flexible, speedy.It can fly indoor .
● Built-in 6-axis gyro stabilizer to ensure accurate positioning
in-flight.
● The structure uses a modular design which makes it easy to
install and repair.
● Headless function making it easy for directional control.
● Pressure-fixed-position hovering function for Auto Hover Mode.
● 360° stunt flip.
● Auto take-off and landing.
● HD wifi real-time transmission aerial for getting the fun of
different photography.
-2-
Remote control’s button function description:
- Exhausted batteries are to be removed from the toy.
- Caution：Risk of explosion if battery replaced by an incorrect type,dispose of
used batteries according to the instructions.
Understanding Your Remote Control
Battery installation for remote control:
Power ON/OFF
Mobile Phone
Retanining Clip
Battery cover
4 x AA Alkaline Batteries
Left joystick
Keep pushing in until
trimming control finished.
To clear all the trimming
setting, keep pushing
and press the power
button at the same time.
Right joystick
Press and hold to enter/exit
headless mode. Press to
change high/low speed.
360° Stunt flip button
Auto take-off and landing
-3-
Phone clip holder installation: Phone clip holder
dismantling:
2.Press the handles to
adjust the jaws.
3.Push the phone clip
holder upwards from
behind the remote
control.
1. During the battery installation, it must be ensured
that the polarities of the batteries are matched with
that of the battery box. No battery shall be installed
with the opposite polarity.
2. Do not use new and old batteries together.
3. Different types of batteries are not be mixed.
4. Do not use rechargeable batteries.
Battery Installation Method: Open up the battery cover at the back of the
remote control. Correctly place 4 x AA alkaline batteries in the battery
box in strict adherence to the polarity instructions (the AA alkaline
batteries are not included).
B
B
A
A
1、Pull out the blades that need to be
replaced.
2、As shown on left, the blade A is
mounted to the arm "A" position,
and the blade B is mounted to the
arm "B" position.
1.Insert the phone clip
holder into the connector
at the top of the remote
control.
Installation and Dismantling of Mobile Phone Retaining Clip
Blade Replacement Method
-4-
1. Flight Preparation
Step 1: Press the power button of the remote
control.
Step 2: Press the power button on the top of
the drone to 1-2S make sure the
drone is turned “ON”.
Step 3: Push the left joystick (accelerator) up
to the highest point and then push
down to the lowest point. When
the LED indicator lights in the drone
change from quick flashing to
continuous light, it means that the
drone goes into the flight standby
mode.
Method 1: Push the left joystick (accelerator)
to the highest point and then back
to the center, the blades of the
drone start rotating slowly.
Method 2: Push the left and right joysticks
to the bottom inner corners for 1
second, and the drone can be
turned off.
2. Turning on the drone
Flight Preparation and Switching the Drone On and Off
-5-
Note:
1.If the drone is out of the range of the flight, the rear indicator light will
flash slowly, and then slow down.
2.When the remote control is switched off or the power is cut off, the
drone will automatically slow down to stop. In the process, open the
remote control to control again.
Method 1: Push the left joystick (accelerator)
to the lowest level and hold there for
2 to 3 seconds, the drone can then
be turned off.
Method 2: Push the left and right joysticks to the
bottom inner corners for 1 second, and
the drone can be turned off.
3. Turning off the drone
Method 3: When the drone is stationary,press
the B button, the drone automatically
takes off and hovers at a certain height.
Method 3: When the drone is in flight, press the
B button, the drone will descend to
the ground and lands.
-6-
Direction control
When the left joystick (accelerator)
is pushed upwards or downwards,
the drone will ascend or descend
correspondingly.
When the right joystick (rudder) is
pushed upwards or downwards, the
drone will advance forward or
backward correspondingly.
Ascending and descending control Forward and backward control
When the left joystick (accelerator)
is pushed towards the left or right,
the drone will turn left or right
correspondingly.
When the right joystick (rudder) is
pushed towards the left or right, the
drone will fly sideways to the left or
right correspondingly.
Left turning and right turning control Left side flying and right side flying
control
Trimming operation
Forward and backward trim control
Drone Controlling Diagram
If the drone automatically flies forward/backward
while hovering, press in the left joystick and at the
same time push the right joystick backward/forward
slightly to fine tune the direction. Don’t release the
left joystick until the drone is flying in a stable state.
-7-
2. Over-Current Protection:
If the drone encounters a direct impact from
a foreign object,or is obstructed, or if the
blades are not rotating, the drone will go into
over-current protection mode.
1. Low-Voltage Protection:
When the two green indicator lights at the
bottom of the drone start flashing, it means
that the drone's battery power is low. Please
fly back the drone immediately at this time.
The drone will automatically slow down when
it is short of power.
Front indicator light
(signal light) red
Rear indicator light
(flight control light) green
Left/right side flight trim control
Left/right side turning trim control
Product Features
If the drone automatically flies towards the left/
right side while hovering, press in the left joystick
and at the same time push the right joystick right/
left slightly to fine tune the direction. Don’t release
the left joystick until the drone is flying in a stable
state.
If the drone automatically rotates and flies towards
the left/right side while hovering, press in the left
joystick and at the same time move it to the right/left
slightly to fine tune the direction. Don’t release the
left joystick until the drone is flying in a stable state.
3. Level Calibration Function:
Place the drone on a level surface and at
the same time, push both left and right
joysticks to the lower right corners for 2 to
3 seconds; the LED light indicator on the
drone will blink rapidly, and it will return
back to the normal status after about 2
to 3 seconds. The level calibration is
successful.
-8-
5. 360° Stunt Flip Function:
3M
4. High/Low Speed Function:
When you are familiar with the basic
actions, you can proceed to explore even
more exciting stunt actions. Fly the drone
to a height of 3M above the ground,
push the upper right corner button
(Stunt Flip Button) on the remote control
and simultaneously push the right joystick
to the farthest position of Front/Back/Left/
Right, the drone will now execute the
Front/Back/Left/Right stunt flip action.
Note: Drone will have the best stunt flip action when the batteries
are fully charged.
6. Auto Hover Function:
After using the left joystick (accelerator)
to control the ascending / descending
flight of the drone,release the left
joystick (accelerator) and the drone
will hover at that height when the
joystick is released.
Low speed by default when first powered-on.
Possible to switch the function mode of high/
low speed by pressing in on the right joystick
for a short time. It is switched into high speed
mode when two “beep” sounds come from the
remote control,pressing in on the right joystick
for a short time under high speed mode and
then one “beep” sound would come from the
remote control, then it is switched back into
low speed mode.
-9-
Indice
Altri manuali SYMA Drone
SYMA
SYMA X5UW-D Manuale utente
SYMA
SYMA X200 Manuale utente
SYMA
SYMA X800W Manuale utente
SYMA
SYMA Z3 Manuale utente
SYMA
SYMA GYRO REMOTE CONTROL SERIES Manuale utente
SYMA
SYMA X26 Manuale utente
SYMA
SYMA X5C Manuale utente
SYMA
SYMA GYRO REMOTE CONTROL SERIES Manuale utente
SYMA
SYMA GC88752-28 Manuale utente
SYMA
SYMA X8C Manuale utente
SYMA
SYMA HD 8500WH Manuale utente
SYMA
SYMA X440 Manuale utente
SYMA
SYMA X5UW(720P) Manuale utente
SYMA
SYMA X8PRO Manuale utente
SYMA
SYMA X1 Manuale
SYMA
SYMA Z3 Manuale utente
SYMA
SYMA X 20 Manuale utente
SYMA
SYMA X110W Manuale utente
SYMA
SYMA X220W Manuale utente
SYMA
SYMA GYRO REMOTE CONTROL SERIES Manuale utente
