SYMA S40 Manuale utente
14+
S40
Instructions For Use
+1(718)312-0558(USA)
+49 335-4551-9201(Germany)
http://www.symatoys.com
English
Contents
1.0 Safety Guide
2.0 Repair and Maintenance
3.0 Cautions
4.0 Contact US
5.0 Accessories/Parts (Optional)
6.0 Understanding the Transmitter
7.0 Flying Instructions
Operations
Trimming
8.0 Charging the Helicopter Battery
Charging instructions
Battery charging information
9.0 Installing Transmitter Batteries
10.0 Re-installing the Blades
11.0 Preparation for Flight
Flight preparation
Height hold
12.0 Safety Guide
1
1
2
2
3
4
4
5
6
6
6
7
7-8
8
8
English
1.0 Safety Guide
1. Please store the smaller-sized drone accessories in places that are out of reach of children.
2. This drone is very powerful. For all first-time flights, the left joystick must be slowly pushed
up in order to prevent the drone from ascending too fast to avoid unnecessary collision and
possible damage and injury.
3. When the flight is ended, first turn off the power of the remote control. Then turn off the
power of the drone.
4. Avoid placing the batteries in places with high temperatures and exposure to heat.
5. Take extra precaution to ensure that the drone is at a minimum distance of 15 feet from
the pilot, other people, and animals in order to prevent bodily injury during flight operation.
A minimum separation distance of 20 cm must be maintained between the user’s body and
the device under normal use condition.
6. This drone is for people ages 14+. It must be flown always within the line of sight of the
pilot (or instructor) and flown safely.
7. Non-rechargeable batteries are not to be recharged; Batteries are to be inserted with the
correct polarity; Different types of batteries or new and used batteries are not be mixed.
8. When the drone is not in use, please remove the batteries in the remote control.
9. The supply terminals are not be short-circuited.
10. Discharge the battery to 40%-50% (On a full charge, fly for half of the total flight time) if
it will not be used for 10 days or more, this can greatly extend the battery life.
11. Please keep a safe distance from the spinning propellers to avoid injury.
12. To ensure the electromagnetic environment requirement of the aviation radio (station),
using remote controls in the zone, which is in a radius of about 5000m zone from the
circle center of the airport runway, is forbidden. All users also should abide by the
regulation of the radio set forth by government and regulatory agencies including the
duration and area.
13. Only uses the recommended transformer for the model, and the transformer is not
a model. Disconnect the transformer from the model which is available cleaning with
liquids before cleaning. Check the cord, plug, enclosure and other parts of the transformer
regularly. If any damages have been discovered, please immediately stop using it, until it
was completely repaired.
14. Never look steadily at the laser beam since the laser radiation.
15. Attention：Drone assembly under adult supervision.
16. The pilot is responsible for the safe operation and safe distance from uninvolved persons
and property on the ground and from other airspace users and shall never fly the drone
above crowds (> 12 persons).
17. Open the battery cover of the toy with screwdriver.
18. The packing has to be kept since it contains important information.
2.0 Repair and Maintenance
1. Use dry and soft cloth to clean this product.
2. Avoid exposing this product to heat.
3. Do not immerse this product in water, otherwise, the electronic parts will be damaged.
4. Check the cord, plug, enclosure and other parts regularly. If any damages have been
discovered, please immediately stop using it, until it was completely repaired.
English
-1-
+1(718)312-0558(USA)
+49 335-4551-9201(Germany)
4.0 Contact US
If there are any problems, please don’t hesitate to contact us firstly. We will try our best to
help you out!!!
3.0 Cautions
Please read the following contents before using to avoid irreparable damage to the battery,
fire, smoke or explosion!!!
1. Avoid short circuits by fitting the batteries incorrectly, and DO NOT crush or squeeze the
batteries as this could carry the risk of an explosion.
2. Insure you store or charging your batteries in an open and dry area away from anything
flammable. （Recom-mended a fire-proof bag.）
3. It is recommended to only use the USB charging cable that comes with the drone to charge
the battery.
4. DO NOT connect the battery directly to wall outlets or car cigarette lighter sockets.
5. DO NOT charge the battery directly after use, allow it time to cool down in an open and dry
area.
6. DO NOT charge the batteries above 2 Amps. Make sure to remove the batteries from the
charger after charging is complete, never overcharge the batteries.
7. DO NOT attempt to disassemble or modify the battery in any way.
8. DO NOT use the battery if it gives off an odor, generates heat, becomes discolored or
deformed, or appears abnormal in any way.
9. Keep battery out of reach of children or pets.
10. Do NOT attempt to disassemble or modify the battery in any way.
11. Be cautious while removing a battery from the charger, it's possible to strip the cords that
could lead to a fire (And ruin the battery).
12. DO NOT pierce the battery casing with a nail or other sharp object, break it open with a
hammer, or step on it!
English
-2-
S40-01
Canopy
S40-11
Main frame
accessories
S40-03
Landing skids
S40-04
The main motor
blade
S40-05
Tail motor
blade
S40-09
Rotor A
S40-08
Tail rotor
S40-07
Balance beam
S40-06
Tail stabilizers
S40-10
Rotor B
S40-13
Battery
S40-14
Flank
S40-15
USB cable
S40-12
Blade clamp
assembly
S40-02
Circuit board
●The product is made out of light and thin materials. Inappropriate operations may lead to
unintended crashes. It may cause the helicopter to be easily damaged.
●After flying the helicopter avoid touching the motors. The motors may be very hot and can
cause burns if touched.
Operating Instructions:
1. Suitable for flying in calm indoor areas. Pay attention to air conditioner/electric fan air flows.
2. Spacious areas. Recommended flying area size: 20 feet X 20 feet wide and 10 feet height.
3. Calm areas. It is strongly recommended to fly in areas without air flows. Do not fly in areas
with: air conditioner/electric fan or table lamp, or other electric equipment which may be
easy damaged.
Flying Environment:
5.0 Accessories/Parts (Optional)
English
-3-
7.0 Flying Instructions
7.1 Operations
Up
Down
Ascend
Descend ForwardBackward
Up
Down
Left Right
Leftward
flight
Rightward
flight
Left stick Right stick
ON/OFF Button
Left stick
(Turn Left/Turn Right)
High/Low speed/
Long press auto display
Right stick
(Leftward flight/
Rightward flight)/
One key takeoff/landing
Turn left trimmer
Turn right trimmer
Left Right
Turn Left
Turn Right
6.0 Understanding the Transmitter
English
-4-
Counter clockwise rotation
Clockwise rotation
1. If the helicopter rear end motor spins clockwise making the helicopter unstable, please
press the right trimming button on the transmitter until the helicopter regains stability.
Notice: Make sure the rear end of the helicopter faces the pilot.
If the helicopter begins to rotate quickly while hovering (left stick is not moved left/right),
please adjust the trim button on the transmitter until the helicopter starts hovering as
normal.
2. If the helicopter rear end motor spins counter clockwise making the helicopter unstable,
please press the right trimming button on the transmitter until the helicopter regains stability.
Notice: Make sure the rear end of the helicopter faces the pilot.
Clockwise rotational
trimming button
Counter clockwise
rotational trimming
button
7.2 Trimming
English
-5-
8.0 Charging the Helicopter Battery
8.1 Charging instructions
Plug the USB cable into the computer’s USB port (The indicator light on the USB cable lights
up); then connect the USB cable to the battery(The indicator light lights off). Unplug the USB
cable, when the indicator light lights up again.
The charging time is about 60 minutes; The flight time is about seven minutes.
8.2 Important: battery charging information
1. Rechargeable batteries should be removed from the toy before being charged.
2. Rechargeable batteries should only be charged under the supervision of adults.
3. Exhausted batteries should be removed from the aircraft.
4. Caution: Risk of explosion if battery is replaced with incorrect ones. Please dispose the
batteries according to the instructions.
Transmitter battery installation: open the battery cover at the back of the transmitter. Install
4pcs AA batteries according to the polarity indications (Note: batteries are not included).
9.0 Installing Transmitter Batteries
Battery Cover
4 x AA Batteries
1. During the battery installation, it must be ensured that the polarities of the batteries
are matched with that of the battery box. No battery shall be installed with the opposite
polarity.
2. Please do not use new and old batteries together.
3. Please do not use different types of batteries together.
4. Do not use rechargeable batteries.
English
-6-
1. Insert the flank into the main
body through the hole, and
rotate and screw it in place.
10.0 Re-installing the Blades
11.0 Preparation for Flight
11.1 Flight preparation
1. Remove the screws before re-installing
the blades.
2. A labeled blades fit on the A labeled
motors, B labeled blades fit on the B
labeled motors. Use the screws to
tighten the blades. Refer to the image.
4. Place the helicopter on the
ground. Make sure the rear
end of the helicopter faces
the pilot.
Horizontal
position
HEAD
TAIL
3. Turn on the transmitter.
2. To turn on the helicopter,
move the on/off switch at
the top of the helicopter to
the ON status/position. The
power light will turn on.
English
-7-
5. Move the throttle stick fully
up and after fully down. The
helicopter indicator lights will
stop flashing and turn solid
indicating successful pairing.
The helicopter is ready to fly.
6. Push the left joystick up.
1. Non-rechargeable batteries should not be recharged; Batteries should be inserted with a
correct polarity; Different types of batteries, new or used batteries should not be mixing.
2. The supply terminals should not be short-circuited.
3. Only use the included charger.
4. Attention: Drone assembly under adult supervision.
5. Open the battery cover of the toy with screwdriver.
6. The packing has to be kept since it contains important information.
7. Charger used with the drone should be examined regularly, such as the cord, plug,
enclosures and other parts. In case of any damages is found, please stop using it unless
it is repaired or replaced.
8. Do not touch the rotating rotor, avoid loose clothing or hair that could be caught in the rotor,
do not fly near the face.
9. Advice to keep the instructions for use.
12.0 Safety Guide
11.2 Height hold
Use the left stick (throttle) to achieve the desired height and after allow the left stick to fall
back to its default middle position.
English
-8-
Indice
Lingue:
Altri manuali SYMA Drone
SYMA
SYMA HD 8500WH Manuale utente
SYMA
SYMA LOG1612-JR Manuale utente
SYMA
SYMA X26 Manuale utente
SYMA
SYMA X5SW-V3 Manuale utente
SYMA
SYMA X11 Manuale di istruzioni
SYMA
SYMA X400 Manuale utente
SYMA
SYMA X1 Manuale
SYMA
SYMA GYRO REMOTE CONTROL SERIES Manuale utente
SYMA
SYMA X5C Manuale utente
SYMA
SYMA LOG1623SM Manuale utente
