SYMA GYRO REMOTE CONTROL SERIES Manuale utente

USER MANUAL

MAIN FEATURES

● Utilizes the 4-axis structure, enabling the drone to be even

more flexible, speedy.It can fly indoor .

● Built-in 6-axis gyro stabilizer to ensure accurate positioning

in-flight.

● The structure uses a modular design which makes it easy to

install and repair.

● Headless function making it easy for directional control.

● Pressure-fixed-position hovering function for Auto Hover Mode.

● 360° stunt flip.

● Auto take-off and landing.

● HD wifi real-time transmission aerial for getting the fun of

different photography.

GYRO REMOTE CONTROL SERIES

4-CHANNEL PRESSURE FIXED POSITION HOVERING

REMOTE CONTROL DRONE

21W(720P)

-1-

Repair and maintenance

1. Please store the smaller-sized drone accessories in places that are out

of reach of children.

2. This drone is very powerful. For all first-time flights, the left joystick

must be slowly pushed up in order to prevent the drone from ascending

too fast to avoid unnecessary collision and possible damage or injury.

3. When the flight is ended, first turn off the power of the remote control.

Then turn off the power of the drone.

4. Avoid placing the batteries in places with high temperatures and

exposure to heat.

5. Take extra precaution to ensure that the drone is at a minimum distance

of 15 feet from the pilot, other people, and animals in order to prevent

bodily injury during flight operation.A minimum separation distance of 20

cm must be maintained between the user's body and the device under

normal use condition.

6. This drone is for people ages 8+. It must be flown always within the

line of sight of the pilot (or instructor) and flown safely.

7. Non-rechargeable batteries are not to be recharged;Batteries are to be

inserted with the correct polarity;Different types of batteries or new and

used batteries are not to be mixed.

8. When the drone is not in use, please remove the batteries in the remote

control.

9. The supply terminals are not to be short-circuited.

10.Attention：Drone assembly under adult supervision.

11.The pilot is responsible for the safe operation and safe distance from

uninvolved persons and property on the ground and from other airspace

users and shall never fly the drone above crowds (> 12 persons).

12.Discharge the battery to 40%-50%（On a full charge, fly for half of the

total flight time） if it will not be used for 10 days or more，this can

greatly extend the battery life.

13.Open the battery cover of the toy with screwdriver.

14.The packing has to be kept since it contains important information.

Safety Guide

1. Use dry and soft cloth to clean this product.

2. Avoid exposing this product to heat.

3. Do not immerse this product in water, otherwise, the electronic parts will

be damaged.

-2-

The following items can be found in this product package:

4.Transformers used with the toy are to be regularly examined for damage to

the cord,plug,enclosure and other parts,and that,in the event of such

damage,the toys must be used with this transformer until the damage has

been repaired.

Package Description

• Drone

• Remote Control

• Instruction Manual

• Screwdriver

• Memory Card

• Card Reader

• Main Blades

• USB Cable

• Mobile Phone Retaining Clip

Phone Clip Attachment/Removal Method

Phone clip holder installation:

1.Insert the phone clip holder into the

connector at the top of the remote

control.

2.Press the spring clip to adjust for size.

Blade replacement method

1、Pull out the blades that need to be

replaced.

2、As shown on left, the blade A is

mounted to the arm "A" position, and

the blade B is mounted to the arm "B"

position.

-3-

Battery changing methods for drone

Battery Changing And

Charging Methods For Drone

1.Press the power button on

the top of the drone to 1-2S

make sure the drone is

turned “OFF”.

2.Push the battery cover

of drone backwards.

4.After battery replacement,

fasten the battery cover again.

3.Pull out the battery plug

from the battery socket.

Precautions as follows during charging of battery:

- Avoid placing the active batteries in places with direct exposure,

sunlight and high temperatures. For example, naked light or electrical

equipment installations; otherwise it may cause damages or explosions .

- Avoid immersing the batteries in the water. The batteries shall be

Battery charging methods for drone

The charging time is about 90 minutes; Hover flight time

is approximately 4.5 minutes.

Phone clip holder dismantle:

1.Pull up the phone clip holder from

behind the remote control.

Connect the battery power cord to the

USB, then connect the USB interface to the

computer. (The indicator light of the drone

will turn on while charging,and turn off when

charging completed.It takes about 90 minutes

to completely charge the battery. )

-4-

Understanding Your Remote Control

Remote control’s button function description:

Battery installation for remote control:

Power ON/OFF

Mobile Phone

Retanining Clip

Battery cover

4 x AA Alkaline Batteries

Left joystick - Keep

pushing in for

trimming. To clear

all the trimming

settings, keep

pushing in and

push the power

button at the same

time.

Right joystick - Push in

over 3 seconds to enter

headless mode then push

in again to exit. Quickly

push in and release to

change high / low speed,

(one beep means low

speed and two beeps

means high speed.)

Photo

Video

360° Stunt flip button

Push for auto take-off

and landing.

- Avoid dismantling the batteries.

- During the charging of battery, avoid leaving the charging place.

- Rechargeable batteries are to be removed from the toy before being

charged；

- Rechargeable batteries are only to be charged under adult supervision；

- Exhausted batteries are to be removed from the toy；

- Caution：Risk of explosion if battery replaced by an incorrect type,dispose

of used batteries according to the instructions.

stored in a cool and dry place.

-5-

1. During the battery installation, it must be ensured

that the polarities of the batteries are matched with

that of the battery box. No battery shall be installed

with the opposite polarity.

2. Do not use new and old batteries together.

3. Different types of batteries are not be mixed.

4. Do not use rechargeable batteries.

Product features

1. Low-voltage Protection:

1. Battery Installation Method: Open up the battery cover at the back of the

remote control. Correctly place 4 x AA alkaline batteries in the battery

box in strict adherence to the polarity instructions (the AA alkaline

batteries are not included).

2. Over-current Protection:

If the drone encounters a direct impact from

a foreign object,or is obstructed, or if the

blades are not rotating, the drone will go into

over-current protection mode.

When the two indicator lights at the rear of

the drone start flashing, it means that the

drone's battery power is low. At this time,

please control the drone return.The drone

will automatically slow down when it is

short of power.

3. Level Calibration Function:

Place the drone on a level surface and at

the same time, push both left and right

joysticks to the lower right corners for 2 to

3 seconds; the rear LED light indicator on

the drone will blink rapidly, and it will return

back to the normal status after about 2

to 3 seconds. The level calibration is

successful.

rear indicator light

(Flight control light) green

front indicator light

(WiFi signal light) red

-6-

5. 360° Stunt Flip Function:

When you are familiar with the basic actions,

you can proceed to explore even more exciting

stunt actions. Fly the drone to a height of 3M

above the ground, push the upper right corner

button (Stunt Flip Button) on the remote control

and simultaneously push the right joystick to the

farthest position of Front/Back/Left/Right, the

drone will now execute the Front/Back/Left/Right

stunt flip action.

6. Auto Hover Function:

After using the left joystick (throttle)

to control the ascending / descending

flight of the drone,release the left

joystick (accelerator) and the drone

will hover at that height when the

joystick is released.

Note: Drone will have the best stunt flip action when the batteries

are fully charged.

4. Fast/Slow Speed Function:

Slow speed by default when first powered-on.

Possible to switch the function mode of fast/

slow speed by pressing in on the right joystick

for a short time. It is switched into fast speed

mode when two “beep” sounds come from the

remote control,pressing in on the right joystick for

a short time under fast speed mode and then one

“beep” sound would come from the remote control,

then it is then switched back into slow speed mode.

7. Headless function:

1. Defining forward direction:

1. Push on the power button of the

remote control.

-7-

Front

Back

Left Right

3. Push the left joystick (throttle) on the remote

control up to the farthest position and then pull

down to the farthest position. When the remote

control issues a long beep sound, it means the

frequency and defining forward direction

functions are completed.

2. Calibration for the definition of the front:

1. When the drone encounters a direct impact

with foreign objects in the headless mode,

if there is an occurrence of deviation of the

defined direction, it is only required to push

both the left and right joysticks to the bottom

left corners simultaneously after placing the

flying direction of the drone in the correction

position. When the rear LED light indicator

of the drone is in a long “ON” mode after

slowly flashing for 3 seconds, it indicates the

calibration is complete.

3. Toggling between headless function and normal function:

1. After the drone is matched with the

corresponding frequency, the drone would be

in normal pattern by default. At this time the

indicator light on the drone would be in a state

of on for a long time. After pressing in on the

right joystick of the remote control for 2

seconds, the remote control would make a

sound of “beep, beep, beep” to show that it

has entered into a state of headless mode.

Pressing in on right joystick for 2 seconds

then a long sound of “beep” would be heard to

show an exit status.(When under the state of

headless mode, four indicator lights on the

drone are led lights which flicker once every

four seconds)

2. Press the power button on the top of the drone

to 1-2s make sure the drone is turned“ON”, and

adjust the specified direction of the drone’s head

under the headless mode as the new forward

direc.

-8-

2. Under the headless mode, the operator

does not need to differentiate the head

position of the drone, and only needs to

control the drone's direction front/back/left/

right by using the right joystick direction on

the remote control.

Front

Back

Left Right

Front

Left

Back

Right

Front

Left

Back

Right

For Android phones,download and install the SYMA GO APP by visiting

the www.symatoys.com or by scanning the QR code.

For IOS Apple phones,download and install the SYMA GO APP by visiting

the App Store or by scanning the QR code.

8.Wifi real-time transmission funtion

1.Downloading the installation software

Reminder: QR codes are provided on the packaging box and at the

bottom of the user manual. Please visit website www.symatoys.com

or the App Store/Google Play to obtain the newest SYMA GO App.

2.How to connect

1.Connect the model to its power source, the camera indicator light should

turn green. Within 10 seconds, the light will flash slowly and the

camera will be waiting for a connection with a smartphone.

2.At this time, enter the “Settings” option on your phone, and turn on WiFi.

In the WiFi search list, look for a network called “FPV-WIFI- ****” and

connect to it. Once connection has been established, exit the “Settings”

option.

3.Open the SYMA GO App, click the “START” icon to enter the control

interface. A full bar in the WiFi signal icon indicates the strongest

possible signal.

1. Open up SYMA GO

APP.

3. The phone’s screen

will display real-time

images.

2. Click the "START" icon,

the system will enter the

APP operation interface

automatically.

-9-

3. Interface icon instructions

Mobile APP control interface

Take photo

WIFI Signal

Record

Time

Right Joystick

Trimming A

Trimming C

Return

Flight-track

Headless mode

Gravity induction mode

Check the memory card memory (need to connect WIFI, and

read the memory card data need to wait a few seconds)

Check the phone memory

Click for display/hide

the toolbar

One key

start/stop

Left Joystick

One Key take-off/

Landing

Trimming B

Display/hide Joystick

High-Low Speed

switch

Level Calibration/defining

headless forward direction

Adjust the scale can change

the flight distance

Flight-track operation interface

Press the flight-track button to enter into the

flight-track interface, and the air vehicle will

flight in accordanne with recorded route.

4. Real-time aerial photography uploading:

Photo/Record: When the 720P WiFi camera is operating normally,press the photo/

record icon in the real-time upload interface to take photos/videos.(Photos/recordings

that were taken can be viewed in the “View Photo and Video” folder)

Note: When using the real-time upload operation in the app, the

range for the operating distance of the aircraft will reduce by

half. The WiFi real-time upload function is optimal in spacious

environments.

5. 720P WIFI camera storage function:

1.When there is a Micro SD card installed in the 720P WIFI camera, photos and videos

will be stored in both the phone's internal storage and in the micro SD card. When

there is no storage card installed in the 720P WIFI camera, photos and videos will

only be stored in the phone's internal storage .

Altri manuali per GYRO REMOTE CONTROL SERIES

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Drone popolari di altre marche

Ryze

Ryze Tello Manuale utente

PowerVision

PowerVision PowerRay Manuale utente

Force1

Force1 rogue F72 Manuale utente

Zerotech

Zerotech DOBBY Manuale utente

Protocol

Protocol VIDEODRONE AP Manuale utente

dji

dji Matrice M210 Manuale utente

MAKE

MAKE Terry Kilby Manuale utente

RUKO

RUKO F11 Manuale utente

Dynali

Dynali 25 H Guida

dji

dji PHANTOM 4 Manuale utente

Atlas

Atlas AtlasPRO Manuale utente

Twodots

Twodots TVVIN BOARD Manuale utente

GDU

GDU SAGA Manuale utente

Ares

Ares ETHOS QX 130 Manuale utente

Walkera

Walkera ZHUN Manuale utente

dji

dji WIND-4 Manuale utente

Potensic

Potensic D58 Manuale utente

Arris

Arris M900 Manuale utente